Search

Background The SARS-CoV-2 pandemic has had profound implications on healthcare institutions. Aims This study aims to assess and compare referral patterns during COVID-19 to corresponding dates for the preceding 3 years (2017–2019), in order to preemptively coordinate the logistics of the surgical unit for similar future experiences. Methods Retrospective review for our institution, a national tertiary referral centre for spine pathology. Two distinct time-points were chosen to represent the varied levels of social restriction during the current pandemic: (i) study period 1 (SP1) from 11 November 2020 to 08 June 2020 represents a national lockdown, and (ii) study period 2 (SP2) from 09 June 2020 to 09 September 2020 indicates an easing of restrictions. Both periods were compared to corresponding dates (CP1: 11 March–08 June and CP2 09 June–09 September) for the preceding 3 years (2017–2019). Data collected included age, gender, and mechanism of injury (MOI) for descriptive analyses. MOIs were categorised into disc disease, cyclist, road-traffic-accident (RTA), falls 2 m, malignancy, sporting injuries, and miscellaneous. Results All MOI categories witnessed a reduction in referral numbers during SP1: disc disease (−29%), cyclist (−5%), RTAs (−66%), falls 2 m (−17%), malignancy (−33%), sporting injuries (−100%), and miscellaneous (−58%). Four of 8 categories (RTAs, falls 2 m) showed a further reduction (−34%, −27%) during SP2. One category (sporting injuries) portrayed a complete return to normal values during SP2 while a notable increase in cyclist-related referrals was witnessed (+ 63%) when compared with corresponding dates of previous years. Conclusion Spinal injury continues to occur across almost all categories, albeit at considerably reduced numbers. RTAs and falls remained the most common MOI. Awareness needs to be drawn to the reduction of malignancy-related referrals to dissuade people with such symptoms from avoiding presentation to hospital over periods of social restrictions.

Tissue-specific extracellular matrix (ECM) proteins can play a key role in regulating the fate of stem cells and can potentially be utilized for therapeutic applications. Realising this potential requires further characterization of the diversity of biomolecules present in tissue-specific ECMs and an evaluation of their role as regulatory cues for regenerative medicine applications. The goal of this study was to identify specific soluble factors within the ECM of articular cartilage (AC) and growth plate (GP) that may impart chondro-inductivity or osteo-inductivity respectively. To this end, the significantly different proteins between both matrisomes were searched against the STRING database platform, from which C-type lectin domain family-11 member-A (CLEC11A) and S100 calcium-binding protein-A10 (S100A10) were identified as potential candidates for supporting osteogenesis, and Gremlin-1 (GREM1) and TGF-β induced gene human clone-3 (βIGH3) were identified as potential candidates for supporting stable chondrogenesis. Stimulation of chondrogenically-primed bone marrow-derived stem cells (BMSCs) with the AC-specific proteins GREM1 and βIGH3 had no noticeable effect on the deposition of collagen-II, a marker of chondrogenesis, but appeared to suppress the production of the hypertrophic marker collagen-X, particularly for higher concentrations of GREM1. Stimulation with GREM1 was also found to suppress the direct osteoblastic differentiation of BMSCs. In contrast, stimulation with the GP-specific factors CLEC11A and S100A10 was found to enhance osteogenesis of BMSCs, increasing the levels of mineralization, particularly for higher concentration of CLEC11A. Together these results demonstrate that AC- and GP-specific proteins may play a key role in developing novel strategies for engineering phenotypically stable articular cartilage or enhancing the regeneration of critically-sized bone defects.

Menisci play a major role in the mechanical function of the knee. They are subjected to large compressive forces and as a result and due to its avascular structure, menisci are prone to irreparable damage. Meniscectomy was once a common procedure for damaged menisci, however alternative approaches involving meniscus regeneration to restore function are of current interest. In order to enable these regenerative strategies, it is of utmost importance to initially establish he structure/property/function relationships of native menisci. Therefore, this study explores the influence of major constituents of the meniscal extracellular matrix; namely the glycosaminoglycan (GAG), and the collagen fibre orientation on the mechanical properties of the bovine meniscus. GAG distribution and mechanical properties are mapped with respect to depth and regional variance within the meniscus. Results show that the inner zone of the meniscus has a significantly larger quantity of GAG compared to the peripheral zone. The tibial and femoral layers contain a higher quantity of GAG than the mid-section and collagen fibre alignment differed depending on region. Overall, it was established that the viscoelastic properties of the meniscus are determined by the co-dependent relationship between the solid and fluid fractions of the meniscus and this varied depending on region. The hydrophilic nature of the GAG molecules play an important role in maintaining the solid/fluid balance while collagen fibre orientation restricts fluid flow within tissue, combined these processes act to support the meniscus under compressive loads.

Successfully treating osteochondral defects involves regenerating both the damaged articular cartilage and the underlying subchondral bone, in addition to the complex interface that separates these tissues. In this study, we demonstrate that a cartilage template, engineered using bone marrow-derived mesenchymal stem cells, can enhance the regeneration of such defects and promote the development of a more mechanically functional repair tissue. We also use a computational mechanobiological model to understand how joint-specific environmental factors, specifically oxygen levels and tissue strains, regulate the conversion of the engineered template into cartilage and bone in vivo.

Biological scaffolds generated from tissue-derived extracellular matrix (ECM) are commonly used clinically for soft tissue regeneration. Such biomaterials can enhance tissue-specific differentiation of adult stem cells, suggesting that structuring different ECMs into multi-layered scaffolds can form the basis of new strategies for regenerating damaged interfacial tissues such as the osteochondral unit. In this study, mass spectrometry is used to demonstrate that growth plate (GP) and articular cartilage (AC) ECMs contain a unique array of regulatory proteins that may be particularly suited to bone and cartilage repair respectively. Applying a novel iterative freeze-drying method, porous bi-phasic scaffolds composed of GP ECM overlaid by AC ECM are fabricated, which are capable of spatially directing stem cell differentiation in vitro, promoting the development of graded tissues transitioning from calcified cartilage to hyaline-like cartilage. Evaluating repair 12-months post-implantation into critically-sized caprine osteochondral defects reveals that these scaffolds promote regeneration in a manner distinct to commercial control-scaffolds. The GP layer supports endochondral bone formation, while the AC layer stimulates the formation of an overlying layer of hyaline cartilage with a collagen fiber architecture better recapitulating the native tissue. These findings support the use of a bi-layered, tissue-specific ECM derived scaffolds for regenerating spatially complex musculoskeletal tissues.

A range of bone regeneration strategies, from growth factor delivery and/or mesenchymal stem cell (MSC) transplantation to endochondral tissue engineering, have been developed in recent years. Despite their tremendous promise, the clinical translation and future use of many of these strategies is being hampered by concerns such as off target effects associated with growth factor delivery. Therefore the overall objective of this study was to investigate the influence of alpha-tricalcium phosphate (α-TCP) nanoparticle delivery into MSCs using an amphipathic cell penetrating peptide RALA, on osteogenesis in vitro and both intramembranous and endochondral bone formation in vivo. RALA complexed α-TCP nanoparticle delivery to MSCs resulted in an increased expression of bone morphogenetic protein-2 (BMP-2) and an upregulation in a number of key osteogenic genes. When α-TCP stimulated MSCs were encapsulated into alginate hydrogels, enhanced mineralization of the engineered construct was observed over a 28 day culture period. Furthermore, the in vivo bone forming potential of RALA complexed α-TCP nanoparticle delivery to MSCs was found to be comparable to growth factor delivery. Recognizing the potential and limitations associated with endochondral bone tissue engineering strategies, we then sought to explore how α-TCP nanoparticle delivery to MSCs influences early mineralization of engineered cartilage templates in vitro and their subsequent ossification in vivo. Despite accelerating mineralization of engineered cartilage templates in vitro, RALA complexed α-TCP nanoparticle delivery did not enhance endochondral bone formation in vivo. Therefore the potential of RALA complexed α-TCP nanoparticle delivery appears to be as an alternative to growth factor delivery as a single stage strategy for promoting bone generation.

Mimicking endochondral ossification to engineer constructs offers a novel solution to overcoming the problems associated with poor vascularisation in bone repair. This can be achieved by harnessing the angiogenic potency of hypertrophic cartilage. In this study, we demonstrate that tissue-engineered hypertrophically primed cartilage constructs can be developed from collagen-based scaffolds cultured with mesenchymal stem cells. These constructs were subsequently implanted into femoral defects in rats. It was evident that the constructs could support enhanced early stage healing at 4 weeks of these weight-bearing femoral bone defects compared to untreated defects. This study demonstrates the value of combining knowledge of development biology and tissue engineering in a developmental engineering inspired approach to tissue repair.

Regeneration of complex bone defects remains a significant clinical challenge. Multi-tool biofabrication has permitted the combination of various biomaterials to create multifaceted composites with tailorable mechanical properties and spatially controlled biological function. In this study we sought to use bioprinting to engineer nonviral gene activated constructs reinforced by polymeric micro-filaments. A gene activated bioink was developed using RGD-γ-irradiated alginate and nano-hydroxyapatite (nHA) complexed to plasmid DNA (pDNA). This ink was combined with bone marrow-derived mesenchymal stem cells (MSCs) and then co-printed with a polycaprolactone supporting mesh to provide mechanical stability to the construct. Reporter genes were first used to demonstrate successful cell transfection using this system, with sustained expression of the transgene detected over 14 days postbioprinting. Delivery of a combination of therapeutic genes encoding for bone morphogenic protein and transforming growth factor promoted robust osteogenesis of encapsulated MSCs in vitro, with enhanced levels of matrix deposition and mineralization observed following the incorporation of therapeutic pDNA. Gene activated MSC-laden constructs were then implanted subcutaneously, directly postfabrication, and were found to support superior levels of vascularization and mineralization compared to cell-free controls. These results validate the use of a gene activated bioink to impart biological functionality to three-dimensional bioprinted constructs.

Regenerating damaged tissue interfaces remains a significant clinical challenge, requiring recapitulation of the structure, composition and function of the native enthesis. In the ligament-to-bone interface this region transitions from ligament to fibrocartilage, to calcified cartilage and then to bone. This gradation in tissue types facilitates the transfer of load between soft and hard structures while minimizing stress concentrations at the interface. Previous attempts to engineer the ligament-bone interface have utilized various scaffold materials with an array of various cell types and/or biological cues. The primary goal of this study was to engineer a multiphased construct mimicking the ligament-bone interface by driving differentiation of a single population of mesenchymal stem cells (MSCs), seeded within blended fibrin-alginate hydrogels, down an endochondral, fibrocartilaginous or ligamentous pathway through spatial presentation of growth factors along the length of the construct within a custom-developed, dual-chamber culture system. MSCs within these engineered constructs demonstrated spatially distinct regions of differentiation, adopting either a cartilaginous or ligamentous phenotype depending on their local environment. Furthermore, there was also evidence of spatially defined progression towards an endochondral phenotype when chondrogenically primed MSCs within this construct were additionally exposed to hypertrophic cues. The study demonstrates the feasibility of engineering spatially complex soft tissues within a single MSC laden hydrogel through the defined presentation of biochemical cues. This novel approach represents a new strategy for engineering the ligament-bone interface. This article is protected by copyright. All rights reserved

Controlling the phenotype of mesenchymal stem cells (MSCs) through the delivery of regulatory genes is a promising strategy in tissue engineering (TE). Essential to effective gene delivery is the choice of gene carrier. Non-viral delivery vectors have been extensively used in TE, however their intrinsic effects on MSC differentiation remain poorly understood. The objective of this study was to investigate the influence of three different classes of non-viral gene delivery vectors: (1) cationic polymers (polyethylenimine, PEI), (2) inorganic nanoparticles (nanohydroxyapatite, nHA) and (3) amphipathic peptides (RALA peptide) on modulating stem cell fate after reporter and therapeutic gene delivery. Despite facilitating similar reporter gene transfection efficiencies, these nanoparticle-based vectors had dramatically different effects on MSC viability, cytoskeletal morphology and differentiation. After reporter gene delivery (pGFP or pLUC), the nHA and RALA vectors supported an elongated MSC morphology, actin stress fibre formation and the development of mature focal adhesions, while cells appeared rounded and less tense following PEI transfection. These changes in MSC morphology correlated with enhanced osteogenesis following nHA and RALA transfection and adipogenesis following PEI transfection. When therapeutic genes encoding for transforming growth factor beta 3 (TGF-β3) and/or bone morphogenic protein 2 (BMP2) were delivered to MSCs, nHA promoted osteogenesis in 2D culture and the development of an endochondral phenotype in 3D culture, while RALA was less osteogenic and appeared to promote a more stable hyaline cartilage-like phenotype. In contrast, PEI failed to induce robust osteogenesis or chondrogenesis of MSCs, despite effective therapeutic protein production. Taken together, these results demonstrate that the differentiation of MSCs through the application of non-viral gene delivery strategies depends not only on the gene delivered, but also on the gene carrier itself. Statement of Significance Nanoparticle-based non-viral gene delivery vectors have been extensively used in regenerative medicine, however their intrinsic effects on mesenchymal stem cell (MSC) differentiation remain poorly understood. This paper demonstrates that different classes of commonly used non-viral vectors are not inert and they have a strong effect on cell morphology, stress fiber formation and gene transcription in MSCs, which in turn modulates their capacity to differentiate towards osteogenic, adipogenic and chondrogenic lineages. These results also point to the need for careful and tissue-specific selection of nanoparticle-based delivery vectors to prevent undesired phenotypic changes and off-target effects when delivering therapeutic genes to damaged or diseased tissues.

Limitations associated with demineralised bone matrix and other grafting materials have motivated the development of alternative strategies to enhance the repair of large bone defects. The growth plate (GP) of developing limbs contain a plethora of growth factors and matrix cues which contribute to long bone growth, suggesting that biomaterials derived from its extracellular matrix (ECM) may be uniquely suited to promoting bone regeneration. The goal of this study was to generate porous scaffolds from decellularised GP ECM and to evaluate their ability to enhance host mediated bone regeneration following their implantation into critically-sized rat cranial defects. The scaffolds were first assessed by culturing with primary human macrophages, which demonstrated that decellularisation resulted in reduced IL-1β and IL-8 production. In vitro, GP derived scaffolds were found capable of supporting osteogenesis of mesenchymal stem cells via either an intramembranous or an endochondral pathway, demonstrating the intrinsic osteoinductivity of the biomaterial. Furthermore, upon implantation into cranial defects, GP derived scaffolds were observed to accelerate vessel in-growth, mineralisation and de novo bone formation. These results support the use of decellularised GP ECM as a scaffold for large bone defect regeneration.

The regeneration of complex tissues and organs remains a major clinical challenge. With a view towards bioprinting such tissues, we developed a new class of pore-forming bioink to spatially and temporally control the presentation of therapeutic genes within bioprinted tissues. By blending sacrificial and stable hydrogels, we were able to produce bioinks whose porosity increased with time following printing. When combined with amphipathic peptide-based plasmid DNA delivery, these bioinks supported enhanced non-viral gene transfer to stem cells in vitro. By modulating the porosity of these bioinks, it was possible to direct either rapid and transient (pore-forming bioinks), or slower and more sustained (solid bioinks) transfection of host or transplanted cells in vivo. To demonstrate the utility of these bioinks for the bioprinting of spatially complex tissues, they were next used to zonally position stem cells and plasmids encoding for either osteogenic (BMP2) or chondrogenic (combination of TGF-β3, BMP2 and SOX9) genes within networks of 3D printed thermoplastic fibers to produce mechanically reinforced, gene activated constructs. In vivo, these bioprinted tissues supported the development of a vascularised, bony tissue overlaid by a layer of stable cartilage. When combined with multiple-tool biofabrication strategies, these gene activated bioinks can enable the bioprinting of a wide range of spatially complex tissues.

Optic neuropathy is a disorder characterised by dysfunction or destruction of the optic nerve tissues. Acquired causes include interruption in the blood supply, nutritional deficiency, compression by a tumour or aneurysm, trauma, and toxic types (Ambizas and Patel In US Pharm 36(4):HS2–HS6, 1). Drug-induced optic neuropathy is of the toxic type and can be defined as a clinical syndrome characterised by papillomacular bundle damage, central, or cecocentral scotoma, and reduced colour vision (Ambizas and Patel In US Pharm 36(4):HS2–HS6, 2011; Sharma and Sharma In Indian J Ophthalmol 59(2):137–141, 2). To report a case unilateral optic neuritis, secondary to the use of the antiandrogen, cyproterone acetate. A 21-year-old female presented with a 4-day history of right brow pain exacerbated by eye movement, and blurring of the right temporal field of vision. She had been taking desogestrel 75 mg and cyproterone acetate 50 mg for the previous 2 months for hormone imbalance. Unaided right visual acuity measured 6/9 and unaided left visual acuity measured 6/6 on Snellen chart. Right red desaturation was present. Goldmann perimetry showed a right enlarged blind spot with predominantly temporal visual field loss. Visually evoked potential (VEP) testing of the right eye showed slightly increased latency, but normal amplitude. Three weeks after discontinuation of the antiandrogen therapy, her symptoms resolved. Repeat Goldmann visual fields showed expansion. Known side-effects of cyproterone acetate include retinal vascular disorder and retinal vein thrombosis, but an association with optic neuritis had not been described to date. There was a temporal relationship between cessation of the medication and improvement in visual symptoms. This implies that discontinuation of the offending drug constitutes the basis of treatment in drug-induced optic neuropathy.

Freshly isolated stromal cells can potentially be used as an alternative to in vitro expanded cells in regenerative medicine. Their use requires the development of bioactive hydrogels or scaffolds which provide an environment to enhance their proliferation and tissue-specific differentiation in vivo . The goal of the current study was to develop an injectable fibrin hydrogel functionalized with cartilage ECM microparticles and transforming growth factor (TGF)-β3 as a putative therapeutic for articular cartilage regeneration. ECM microparticles were produced by cryomilling and freeze-drying porcine articular cartilage. Up to 2% (w/v) ECM could be incorporated into fibrin without detrimentally affecting its capacity to form stable hydrogels. To access the chondroinductivity of cartilage ECM, we compared chondrogenesis of infrapatellar fat pad-derived stem cells in fibrin hydrogels functionalized with either particulated ECM or control gelatin microspheres. Cartilage ECM particles could be used to control the delivery of TGF-β3 to IFP-derived stem cells within fibrin hydrogels in vitro , and furthermore, led to higher levels of sulphated glycosaminoglycan (sGAG) and collagen accumulation compared to control constructs loaded with gelatin microspheres. In vivo , freshly isolated stromal cells generated a more cartilage-like tissue within fibrin hydrogels functionalized with cartilage ECM particles compared to the control gelatin loaded constructs. These tissues stained strongly for type II collagen and contained higher levels of sGAGs. These results support the use of fibrin hydrogels functionalized with cartilage ECM components in single-stage, cell-based therapies for joint regeneration. Statement of Significance An alternative to the use of in vitro expanded cells in regenerative medicine is the use of freshly isolated stromal cells, where a bioactive scaffold or hydrogel is used to provide an environment that enhances their proliferation and tissue-specific differentiation in vivo . The objective of this study was to develop an injectable fibrin hydrogel functionalized with cartilage ECM micro-particles and the growth factor TGF-β3 as a therapeutic for articular cartilage regeneration. This study demonstrates that freshly isolated stromal cells generate cartilage tissue in vivo when incorporated into such a fibrin hydrogels functionalized with cartilage ECM particles. These findings open up new possibilities for in-theatre, single-stage, cell-based therapies for joint regeneration.

The ability to print defined patterns of cells and extracellular-matrix components in three dimensions has enabled the engineering of simple biological tissues; however, bioprinting functional solid organs is beyond the capabilities of current biofabrication technologies. An alternative approach would be to bioprint the developmental precursor to an adult organ, using this engineered rudiment as a template for subsequent organogenesis in vivo. This study demonstrates that developmentally inspired hypertrophic cartilage templates can be engineered in vitro using stem cells within a supporting gamma-irradiated alginate bioink incorporating Arg-Gly-Asp adhesion peptides. Furthermore, these soft tissue templates can be reinforced with a network of printed polycaprolactone fibers, resulting in a ≈350 fold increase in construct compressive modulus providing the necessary stiffness to implant such immature cartilaginous rudiments into load bearing locations. As a proof-of-principal, multiple-tool biofabrication is used to engineer a mechanically reinforced cartilaginous template mimicking the geometry of a vertebral body, which in vivo supported the development of a vascularized bone organ containing trabecular-like endochondral bone with a supporting marrow structure. Such developmental engineering approaches could be applied to the biofabrication of other solid organs by bioprinting precursors that have the capacity to mature into their adult counterparts over time in vivo.

Collagen and collagen-based scaffolds offer distinct advantages when selected as biomaterials for use across a broad spectrum of regenerative medicine applications. However, relatively poor mechanical properties are often perceived to limit their usefulness for orthopedic applications. These problems can be overcome through enhanced crosslinking mechanisms or through the addition of a second, stiffer phase such as hydroxyapatite, thus allowing tailored composite scaffolds to meet specific tissue requirements. This overview will highlight the current state of the art of these scaffolds, and consider the exciting prospects and future directions of collagen-based technologies for orthopedic regenerative medicine.

The ability of nano-hydroxyapatite (nHA) particles developed in-house to act as non-viral delivery vectors is assessed. These nHA particles are combined with collagen to yield bioactive, biodegradable collagen nano-hydroxyapatite (coll-nHA) scaffolds. Their ability to act as gene-activated matrices for BMP2 delivery is demonstrated with successful transfection of mesenchymal stem cells (MSCs) resulting in high calcium production.