Search

Study Design: Biomechanical. Objective: This study evaluates the biomechanical properties of lag-screws used in vertebral pincer fractures at the thoracolumbar junction. Methods: Pincer fractures were created in 18 bisegmental human specimens. The specimens were assigned to three groups depending on their treatment perspective, either bolted, with the thread positioned in the cortical or cancellous bone, or control. The specimens were mounted in a servo-hydraulic testing machine and loaded with a 500 N follower load. They were consecutively tested in 3 different conditions: intact, fractured, and bolted/control. For each condition 10 cycles in extension/flexion, torsion, and lateral bending were applied. After each tested condition, a computed tomography (CT) scan was performed. Finally, an extension/flexion fatigue loading was applied to all specimens. Results: Biomechanical results revealed a nonsignificant increase in stiffness in extension/flexion of the fractured specimens compared with the intact ones. For lateral bending and torsion, the stiffness was significantly lower. Compared with the fractured specimens, no changes in stiffness due to bolting were discovered. CT scans showed an increasing fracture gap during axial loading both in extension/flexion, torsion, and lateral bending in the control specimens. In bolted specimens, the anterior fragment was approximated, and the fracture gap nullified. This refers to both the cortical and the cancellous thread positions. Conclusion: The results of this study concerning the effect of lag-screws on pincer fractures appear promising. Though there was little effect on stiffness, CT scans reveal a bony contact in the bolted specimens, which is a requirement for bony healing.

Summary Critical limb ischemia (CLI) is a hazardous manifestation of atherosclerosis and treatment failure is common. Abnormalities in the arterioles might underlie this failure but the cellular pathobiology of microvessels in CLI is poorly understood. We analyzed 349 intramuscular arterioles in lower limb specimens from individuals with and without CLI. Arteriolar densities were 1.8-fold higher in CLI muscles. However, 33% of small (, Graphical Abstract, Highlights • Small arterioles in patients with critical limb ischemia can be narrowed or closed • Arteriolar occlusion is due to bulky endothelial cells • Bulky endothelial cells have partially transitioned to mesenchymal cells • Occlusive cells interlock laterally and apically via N-cadherin neo-adhesions, Clinical Finding; Human Specimen; Pathophysiology

Background and purpose Rupture risk of intracranial aneurysms is a major issue for public healthcare. A way to obtain an individual rupture risk assessment is a main objective of many research teams in the world. For many years, we have investigated the relationship between the mechanical properties of aneurysm wall tissues and the rupture risk. In this work, we try to go further and investigate rupture limit values. Methods Following surgical clipping, a specific conservation protocol was applied to aneurysmal tissues in order to preserve their mechanical properties. Thirty-nine intracranial aneurysms (27 females, 12 males) were tested using a uniaxial tensile test machine under physiological conditions, temperature, and saline isotonic solution. These represented 24 unruptured and 15 ruptured aneurysms. Stress/strain curves were then obtained for each sample, and a fitting algorithm was applied following a Yeoh hyperelastic model with 2 parameters. Moreover, uniaxial tensile tests were conducted until rupture of samples to obtain values of stress and strain rupture limit. Results The significant parameter a C 2 of the hyperelastic Yeoh model, allowed us to classify samples’ rigidity following the terminology we adopted in previous papers (Costalat et al., 2011; Sanchez et al., 2013 ): Soft, Stiff and Intermediate. Moreover, strain/stress rupture limit values were gathered and analyzed thanks to the tissue rigidity, the status of the aneurysm (initially ruptured or unruptured) and the gender of the patient. Conclusion Strain rupture limit was found quite stable around 20% and seems not to be correlated with the status of the aneurysm (initially ruptured or unruptured), neither with the gender of the patient. However, stretch and stress rupture limit seems not to be independent on the rigidity. The study confirms that ruptured aneurysms mainly present a soft tissue and unruptured aneurysms present a stiff material.

Background and purpose: Individual rupture risk assessment of intracranial aneurysms is a major issue in the clinical management of asymptomatic aneurysms. Aneurysm rupture occurs when wall tension exceeds the strength limit of the wall tissue. At present, aneurysmal wall mechanics are poorly understood and thus, risk assessment involving mechanical properties is inexistent. Aneurysm computational hemodynamics studies make the assumption of rigid walls, an arguable simplification. We therefore aim to assess mechanical properties of ruptured and unruptured intracranial aneurysms in order to provide the foundation for future patient-specific aneurysmal risk assessment. This work also challenges some of the currently held hypotheses in computational flow hemodynamics research. Methods: A specific conservation protocol was applied to aneurysmal tissues following clipping and resection in order to preserve their mechanical properties. Sixteen intracranial aneurysms (11 female, 5 male) underwent mechanical uniaxial stress tests under physiological conditions, temperature, and saline isotonic solution. These represented 11 unruptured and 5 ruptured aneurysms. Stress/strain curves were then obtained for each sample, and a fitting algorithm was applied following a 3-parameter (C(10), C(01), C(11)) Mooney-Rivlin hyperelastic model. Each aneurysm was classified according to its biomechanical properties and (un)rupture status./nResults: Tissue testing demonstrated three main tissue classes: Soft, Rigid, and Intermediate. All unruptured aneurysms presented a more Rigid tissue than ruptured or pre-ruptured aneurysms within each gender subgroup. Wall thickness was not correlated to aneurysmal status (ruptured/unruptured). An Intermediate subgroup of unruptured aneurysms with softer tissue characteristic was identified and correlated with multiple documented risk factors of rupture. Conclusion: There is a significant modification in biomechanical properties between ruptured aneurysm, presenting a soft tissue and unruptured aneurysms, presenting a rigid material. This finding strongly supports the idea that a biomechanical risk factor based assessment should be utilized in the to improve the therapeutic decision making.