Search

Recent advances in biomedical and pharmaceutical processes has enabled a notable increase of protein- and peptide-based drug therapies and vaccines that often contain a higher-order structure critical to their efficacy. Hyphenation of chromatographic and spectrometric techniques is at the center of all facets of biopharmaceutical analysis, purification and chemical characterization. Although computer-assisted chromatographic modeling of small molecules has reached a mature stage across the pharmaceutical industry, software-based method optimization approaches for large molecules has yet to see the same revitalization. Conformational changes of biomolecules under chromatographic conditions have been identified as the major culprit in terms of sub-optimal modeling outcomes. In order to circumvent these challenges, we herein investigate the outcomes generated via computer-assisted modeling from using different chaotropic and denaturing mobile phases (trifluoroacetic acid, sodium perchlorate and guanidine hydrochloride in acetonitrile/water-based eluents). Linear and polynomial regression retention models using ACD/Labs software were built as a function of gradient slope, column temperature and mobile phase buffer for eight different model proteins ranging from 12 to 670 kDa (holo-transferrin, cytochrome C, apomyoglobin, ribonuclease A, ribonuclease A type I-A, albumin, y-globulin and thyroglobulin bovine). Correlation between experimental and modeled outputs was substantially improved by using strong chaotropic and denaturing modifiers in the mobile phase, even when using linear regression modeling as typically observed for small molecules. On the contrary, the use of conventional TFA buffer concentrations at low column temperatures required the used of polynomial regression modeling indicating potential conformational structure changes of proteins upon chromatographic conditions. In addition, we illustrate the power of modern computer-assisted chromatography modeling combined with chaotropic agents in the developing of new RPLC assays for protein-based therapeutics and vaccines.

Monoclonal antibodies (mAbs) are widely used as critical reagents in analytical assays. While regulatory guidelines exist for stability monitoring of biopharmaceutical antibodies, they do not apply directly to the stability of mAbs used as assay reagent. We investigated alternative approaches to real-time stability monitoring of assay reagents. We compared functional (ELISA and cell-based) and biochemical (aggregation, deamidation) assay results using temperature-stressed mAb reagents. Data from both assay groups were compared for indications of antibody degradation. Arrhenius model kinetics was used to further extrapolate stability trends. Changes detected by traditionally monitored biochemical changes were not directly predictive of assay function. Instead, monitoring of reportable results was a closer indication of changes in assay performance related to mAb degradation. Using Arrhenius kinetic modeling, we combined forced degradation of individual reagents with reportable assay results to classify reagents into risk groups with associated re-evaluation and monitoring plans. This combined approach mitigates risk by monitoring each mAb reagent individually under stressed conditions while streamlining expiry assignment through simplified Arrhenius kinetics with only limited real-time stability data.

Ebolavirus (EBOV) entry to host cells requires membrane-associated glycoprotein (GP). A recombinant vesicular stomatitis virus vector carrying Zaire Ebola virus glycoprotein (rVSV-ZEBOV) was developed as a vaccine against ebolaviruses. The VSV glycoprotein gene was deleted (rVSVΔG) and ZEBOV glycoprotein (GP) was inserted into the deleted VSV glycoprotein open reading frame (ORF) resulting in a live, replication-competent vector (rVSVΔG-ZEBOV-GP). Automated capillary westerns were used to characterize the rVSVΔG-ZEBOV-GP vaccine (ERVEBO®) manufacturing process with regards to glycoprotein (GP) structure and variants. The method shows a unique electropherogram profile for each process step which could be used to monitor process robustness. rVSVΔG-ZEBOV-GP encodes GP (GP1-GP2), secreted GP (sGP), and small secreted GP (ssGP) variants. Furthermore, a TACE-like activity was observed indirectly by detecting soluble GP2Δ after virus precipitation by ultracentrifugation. Capillary western blotting techniques can guide process development by evaluating process steps such as enzyme treatment. In addition, the technique can assess GP stability and process lot-to-lot consistency. Finally, capillary western-based technology was used to identify a unique biochemical profile of the rVSVΔG-ZEBOV-GP vaccine strain in final product. Virion membrane-bound GP1-GP2 is critical to vaccine-elicited protection by providing both neutralizing antibodies and T-cell response.

Clostridium difficile infection (CDI) is the leading cause of gastroenteritis-associated death in the United States. The major virulent factors of C. difficile are toxin A (TcdA) and toxin B (TcdB). Toxicity is mediated by the glucosyltransferase domains on TcdA and TcdB wherein a glucose is transferred from UDP-glucose to Ras homolog family member A (RhoA) receptor. This modification results in disruption of critical cell signaling events. Vaccination against these toxins is considered the best way to combat the CDI. In order to produce non-toxic TcdA and TcdB antigens, their glucosyltransferase domains were genetically mutated to inactivate the toxin activity. We have developed a reverse phase ultra performance liquid chromatographic (RP-UPLC) method to measure this glucosyltransferase activity by separating RhoA and glucosylated RhoA. Glucosylated RhoA and RhoA have a retention time (RT) of 31.25 and 31.95min. We determine for the first time the glucosyltransferase kinetics (Km and kcat) of both full length TcdA and TcdB to RhoA and demonstrate that the genetically mutated TcdA and TcdB show no glucosyltransferase activity. Furthermore, two-dimensional electron microscopy (2D EM) data demonstrates that the overall global structures of mutated toxins do not change compared to native toxins.

TargetingClostridium difficileinfection (CDI) is challenging because treatment options are limited, and high recurrence rates are common. One reason for this is that hypervirulent CDI often has a binary toxin termed theC. difficiletoxin (CDT), in addition to the enterotoxins TsdA and TsdB. CDT has an enzymatic component, termed CDTa, and a pore-forming or delivery subunit termed CDTb. CDTb was characterized here using a combination of single particle cryoEM, X-ray crystallography, NMR, and other biophysical methods. In the absence of CDTa, two novel di-heptamer structures foractivated CDTb (aCDTb; 1.0 MDa) were solved at atomic resolution including a symmetric (SymCDTb; 3.14 Å) and an asymmetric form (AsymCDTb; 2.84 Å). Roles played by two receptor-binding domains of aCDTb were of particular interest since RBD1 lacks sequence homology to any other known toxin, and the RBD2 domain is completely absent in other well-studied heptameric toxins (i.e. anthrax). ForAsymCDTb, a novel Ca2+binding site was discovered in RBD1 that is important for its stability, and RBD2 was found to be critical for host cell toxicity and the novel di-heptamer fold for both forms of aCDTb. Together, these studies represent a starting point for structure-based drug-discovery strategies to targeting CDT in the most severe strains of CDI.SIGNIFICANCE STATEMENTThere is a high burden fromC. difficileinfection (CDI) throughout the world, and the Center for Disease Control (CDC) reports more than 500,000 cases annually in the United States, resulting in an estimated 15,000 deaths. In addition to the large clostridial toxins, TcdA/TcdB, a thirdC. difficilebinary toxin (CDT) is associated with the most serious outbreaks of drug resistant CDI in the 21stcentury. Here, structural biology and biophysical approaches were used to characterize the cell binding component of CDT, termed CDTb, at atomic resolution. Surprisingly, two novel structures were solved from a single sample that help to explain the molecular underpinnings ofC. difficiletoxicity. These structures will also be important for targeting this human pathogen via structure-based therapeutic design methods.

Human cytomegalovirus (HCMV) is a ubiquitous pathogen that can cause disability in newborns and serious clinical diseases in immunocompromised patients. HCMV has a large genome with enormous coding potential; its viral particles are equipped with complicated glycoprotein complexes and can infect a wide range of human cells. Although multiple host cellular receptors interacting with viral glycoproteins have been reported, the mechanism of HCMV infection remains a mystery. Here we report identification of adipocyte plasma membrane-associated protein (APMAP) as a novel modulator active in the early stage of HCMV infection. APMAP is necessary for HCMV infection in both epithelial cells and fibroblasts; knockdown of APMAP expression significantly reduced HCMV infection of these cells. Interestingly, ectopic expression of human APMAP in cells refractory to HCMV infection, such as canine MDCK and murine NIH/3T3 cells, promoted HCMV infection. Furthermore, reduction in viral immediate early (IE) gene transcription at 6 h post infection and delayed nucleus translocation of tegument delivered pp65 at 4 h post infection were detected in APMAP-deficient cells but not in the wildtype cells. These results suggest that APMAP plays a role in the early stage of HCMV infection. Results from biochemical studies of APMAP and HCMV proteins suggest that APMAP could participate in HCMV infection through interaction with gH/gL containing glycoprotein complexes at low pH and mediate nucleus translocation of tegument pp65. Taken together, our results suggest that APMAP functions as a modulator promoting HCMV infection in multiple cell types and is an important player in the complex HCMV infection mechanism., Author summary Human cytomegalovirus (HCMV) is a prototypic β-herpesvirus that merits attention because of its ubiquitous prevalence and clinical significance among immature and immune compromised populations. Since its first isolation in 1956, there have been continuous efforts on understanding the infection mechanism of HCMV, which could serve as the basis for antiviral drugs and vaccines. Unfortunately, understanding of HCMV infection mechanisms and key host cellular factors involved in viral entry remain elusive, partly due to the complexity of HCMV. We report here identification of a type II membrane protein, adipocyte plasma membrane associated protein (APMAP), as a novel modulator promoting HCMV infection. We demonstrated that APMAP is both necessary and sufficient for HCMV infection of multiple cell types. APMAP may function through the interaction with viral gH/gL-containing glycoprotein complexes at low pH and mediate nuclear translocation of pp65, a viral tegument protein. Taken together, our results indicate that APMAP serves as an augmenting modulator of HCMV at the early stage of viral infection.

Human cytomegalovirus (HCMV) is the leading cause of congenital viral infection, and developing a prophylactic vaccine is of high priority to public health. We recently reported a replication-defective human cytomegalovirus with restored pentameric complex glycoprotein H (gH)/gL/pUL128-131 for prevention of congenital HCMV infection. While the quantity of vaccine-induced antibody responses can be measured in a viral neutralization assay, assessing the quality of such responses, including the ability of vaccine-induced antibodies to cross-neutralize the field strains of HCMV, remains a challenge. In this study, with a panel of neutralizing antibodies from three healthy human donors with natural HCMV infection or a vaccinated animal, we mapped eight sites on the dominant virus-neutralizing antigen—the pentameric complex of glycoprotein H (gH), gL, and pUL128, pUL130, and pUL131. By evaluating the site-specific antibodies in vaccine immune sera, we demonstrated that vaccination elicited functional antiviral antibodies to multiple neutralizing sites in rhesus macaques, with quality attributes comparable to those of CMV hyperimmune globulin. Furthermore, these immune sera showed antiviral activities against a panel of genetically distinct HCMV clinical isolates. These results highlighted the importance of understanding the quality of vaccine-induced antibody responses, which includes not only the neutralizing potency in key cell types but also the ability to protect against the genetically diverse field strains. IMPORTANCE HCMV is the leading cause of congenital viral infection, and development of a preventive vaccine is a high public health priority. To understand the strain coverage of vaccine-induced immune responses in comparison with natural immunity, we used a panel of broadly neutralizing antibodies to identify the immunogenic sites of a dominant viral antigen—the pentameric complex. We further demonstrated that following vaccination of a replication-defective virus with the restored pentameric complex, rhesus macaques can develop broadly neutralizing antibodies targeting multiple immunogenic sites of the pentameric complex. Such analyses of site-specific antibody responses are imperative to our assessment of the quality of vaccine-induced immunity in clinical studies.

Capillary Electrophoresis (CE) is a versatile and indispensable analytical tool that can be applied to characterize proteins. In recent years, labor-intensive SDS-PAGE and IEF slab gels have been replaced with CE-SDS (CGE) and CE-IEF methods, respectively, in the biopharmaceutical industry. These two CE-based methods are now an industry standard and are an expectation of the regulatory agencies for biologics characterization. Another important and traditional slab gel technique is the western blot, which detects proteins using immuno-specific reagents after SDS-PAGE separation. This technique is widely used across industrial and academic laboratories, but it is very laborious, manual, time-consuming, and only semi-quantitative. Here, we describe the applications of a relatively new CE-based western blot technology which is automated, fast, and quantitative. We have used this technology for both charge- and size-based CE westerns to analyze biotherapeutic and vaccine products. The size-based capillary western can be used for fast antibody screening, clone selection, product titer, identity, and degradation while the charge-based capillary western can be used to study product charge heterogeneity. Examples using this technology for monoclonal antibody (mAb), Enbrel, CRM197, and Clostridium difficile (C. difficile) vaccine proteins are presented here to demonstrate the utility of the capillary western techniques. Details of sample preparation and experimental conditions for each capillary western mode are described in this chapter.