Search

The Malaise trap has gained popularity for assessing diverse terrestrial arthropod communities because it collects large samples with modest effort. A number of factors that influence collection efficiency, placement being one of them. For instance, when designing larger biotic surveys using arrays of Malaise traps we need to know the optimal distance between individual traps that maximises observable species richness and community composition. We examined the influence of spacing between Malaise traps by metabarcoding samples from two field experiments at a site in Waterloo, Ontario, Canada. For one experiment, we used two trap pairs deployed at weekly increasing distance (3m increments from 3 to 27 m). The second experiment involved a total of 10 traps set up in a row at 3m distance intervals for three consecutive weeks.Results show that community similarity of samples decreases over distance between traps. The amount of species shared between trap pairs shows drops considerably at about 15m trap-to-trap distance. This change can be observed across all major taxonomic groups and for two different habitat types (grassland and forest). Large numbers of OTUs found only once within samples cause rather large dissimilarity between distance pairs even at close proximity. This could be caused by a large number of transient species from adjacent habitat which arrive at the trap through passive transport, as well as capture of rare taxa, which end up in different traps by chance.

DNA barcoding involves the use of one or more short, standardized DNA fragments for the rapid identification of species. A 648-bp segment near the 5′ terminus of the mitochondrial cytochrome c oxidase subunit I (COI) gene has been adopted as the universal DNA barcode for members of the animal kingdom, but its utility in mushrooms is complicated by the frequent occurrence of large introns. As a consequence, ITS has been adopted as the standard DNA barcode marker for mushrooms despite several shortcomings. This study employed newly designed primers coupled with cDNA analysis to examine COI sequence diversity in six species of Pleurotus and compared these results with those for ITS. The ability of the COI gene to discriminate six species of Pleurotus, the commonly cultivated oyster mushroom, was examined by analysis of cDNA. The amplification success, sequence variation within and among species, and the ability to design effective primers was tested. We compared ITS sequences to their COI cDNA counterparts for all isolates. ITS discriminated between all six species, but some sequence results were uninterpretable, because of length variation among ITS copies. By comparison, a complete COI sequences were recovered from all but three individuals of Pleurotus giganteus where only the 5′ region was obtained. The COI sequences permitted the resolution of all species when partial data was excluded for P. giganteus. Our results suggest that COI can be a useful barcode marker for mushrooms when cDNA analysis is adopted, permitting identifications in cases where ITS cannot be recovered or where it offers higher resolution when fresh tissue is. The suitability of this approach remains to be confirmed for other mushrooms.

Summary Ericaceae (the heather family) is a large and diverse group of plants that forms elaborate symbiotic relationships with mycorrhizal fungi, and includes several nonphotosynthetic lineages. Using an extensive sample of fully mycoheterotrophic (MH) species, we explored inter- and intraspecific variation as well as selective constraints acting on the plastomes of these unusual plants. The plastomes of seven MH genera were analysed in a phylogenetic context with two geographically disparate individuals sequenced for Allotropa, Monotropa, and Pityopus. The plastomes of nonphotosynthetic Ericaceae are highly reduced in size (c. 33–41 kbp) and content, having lost all photosynthesis-related genes, and are reduced to encoding housekeeping genes as well as a protease subunit (clpP)-like and acetyl-CoA carboxylase subunit D (accD)-like open reading frames. Despite an increase in the rate of their nucleotide substitutions, the remaining protein-coding genes are typically under purifying selection in full MHs. We also identified ribosomal proteins under relaxed or neutral selection. These plastomes also exhibit striking structural rearrangements. Intraspecific variation within MH Ericaceae ranges from a few differences (Allotropa) to extensive population divergences (Monotropa, Hypopitys), which indicates that cryptic speciation may be occurring in several lineages. The pattern of gene loss within fully MH Ericaceae plastomes suggests an advanced state of degradation.

Freshwater biomonitoring programmes routinely sample aquatic macroinvertebrates. These samples are time-consuming to collect, as well as challenging and costly to identify reliably genus or species. Environmental DNA (eDNA) metabarcoding has emerged as a surrogate to traditional collection techniques and has been used in whole-community approaches across several taxa and ecosystems. However, the usefulness of eDNA-based detection of freshwater macroinvertebrates has not been extensively explored. Few studies have directly compared bulk sample and eDNA metabarcoding at a local scale to assess how effective each method is at characterizing aquatic macroinvertebrate communities. Here, we collected both eDNA and kicknet samples at the same sample transect locations across nine different streams in southern Ontario, Canada. We observed minimal overlap in community composition between these paired samples. Bulk tissue metabarcoding resulted in a greater proportion of sequences belonging to metazoan taxa (over 99%) than eDNA (12%) and had higher OTU richness for macroinvertebrate taxa. We suggest that degenerate primers are not effective for eDNA metabarcoding due to the high degree of nontarget amplification and subsequently low yield of target DNA. While both bulk sample and eDNA metabarcoding had the power to detect differences between stream communities, eDNA did not represent local communities. Bulk tissue metabarcoding thus provides a more accurate representation of local stream macroinvertebrate communities and is the preferred method if smaller-scale spatial resolution is an important factor in data analyses.

Although DNA metabarcoding is an attractive approach for monitoring biodiversity, it is often difficult to detect all the species present in a bulk sample. In particular, sequence recovery for a given species depends on its biomass and mitome copy number as well as the primer set employed for PCR. To examine these variables, we constructed a mock community of terrestrial arthropods comprised of 374 species. We used this community to examine how species recovery was impacted when amplicon pools were constructed in four ways. The first two protocols involved the construction of bulk DNA extracts from different body segments (Bulk Abdomen, Bulk Leg). The other protocols involved the production of DNA extracts from single legs which were then merged prior to PCR (Composite Leg) or PCR‐amplified separately (Single Leg) and then pooled. The amplicons generated by these four treatments were then sequenced on three platforms (Illumina MiSeq, Ion Torrent PGM and Ion Torrent S5). The choice of sequencing platform did not substantially influence species recovery, although the Miseq delivered the highest sequence quality. As expected, species recovery was most efficient from the Single Leg treatment because amplicon abundance varied little among taxa. Among the three treatments where PCR occurred after pooling, the Bulk Abdomen treatment produced a more uniform read abundance than the Bulk Leg or Composite Leg treatment. Primer choice also influenced species recovery and evenness. Our results reveal how variation in protocols can have substantial impacts on perceived diversity unless sequencing coverage is sufficient to reach an asymptote.

The Lennoaceae, a small monophyletic plant family of root parasites endemic to the Americas, are one of the last remaining independently evolved lineages of parasitic angiosperms lacking a published plastome. In this study, we present the assembled and annotated plastomes of two species spanning the crown node of Lennoaceae, Lennoa madreporoides and Pholisma arenarium, as well as their close autotrophic relative from the sister family Ehretiaceae, Tiquilia plicata. We find that the plastomes of L. madreporoides and P. arenarium are similar in size and gene content, and substantially reduced compared to T. plicata, consistent with trends seen in other holoparasitic lineages. In particular, most plastid genes involved in photosynthesis function have been lost, whereas housekeeping genes (ribosomal protein-coding genes, rRNAs, and tRNAs) are retained. One notable exception is the persistence of a rbcL open reading frame in P. arenarium but not L. madreporoides suggesting a nonphotosynthetic function for this gene. Of the retained coding genes, dN/dS ratios indicate that some remain under purifying selection, whereas others show relaxed selection. Overall, this study supports the mounting evidence for convergent plastome evolution in flowering plants following the shift to heterotrophy.

Premise of the Study The detection of environmental DNA (eDNA) using high-throughput sequencing has rapidly emerged as a method to detect organisms from environmental samples. However, eDNA studies of aquatic biomes have focused on surveillance of animal species with less emphasis on plants. Pondweeds are important bioindicators of freshwater ecosystems, although their diversity is underestimated due to difficulties in morphological identification and monitoring. Methods A protocol was developed to detect pondweeds in water samples using atpB-rbcL and ITS2 markers. The water samples were collected from the Grand River within the rare Charitable Research Reserve, Ontario (RARE). Short fragments were amplified using primers targeting pondweeds, sequenced on an Ion Torrent Personal Genome Machine, and assigned to the taxonomy using a local DNA reference library and GenBank. Results We detected two species earlier documented at the experimental site during ecological surveys (Potamogeton crispus and Stuckenia pectinata) and three species new to the RARE checklist (P. foliosus, S. filiformis, and Zannichellia palustris). Discussion Our targeted approach to track the species composition of pondweeds in freshwater ecosystems revealed underestimation of their diversity. This result suggests that eDNA is an effective tool for monitoring plant diversity in aquatic habitats.

Background Although high-throughput sequencers (HTS) have largely displaced their Sanger counterparts, the short read lengths and high error rates of most platforms constrain their utility for amplicon sequencing. The present study tests the capacity of single molecule, real-time (SMRT) sequencing implemented on the SEQUEL platform to overcome these limitations, employing 658 bp amplicons of the mitochondrial cytochrome c oxidase I gene as a model system. Results By examining templates from more than 5000 species and 20,000 specimens, the performance of SMRT sequencing was tested with amplicons showing wide variation in GC composition and varied sequence attributes. SMRT and Sanger sequences were very similar, but SMRT sequencing provided more complete coverage, especially for amplicons with homopolymer tracts. Because it can characterize amplicon pools from 10,000 DNA extracts in a single run, the SEQUEL can reduce greatly reduce sequencing costs in comparison to first (Sanger) and second generation platforms (Illumina, Ion). Conclusions SMRT analysis generates high-fidelity sequences from amplicons with varying GC content and is resilient to homopolymer tracts. Analytical costs are low, substantially less than those for first or second generation sequencers. When implemented on the SEQUEL platform, SMRT analysis enables massive amplicon characterization because each instrument can recover sequences from more than 5 million DNA extracts a year. Electronic supplementary material The online version of this article (10.1186/s12864-018-4611-3) contains supplementary material, which is available to authorized users.

Their relatively slow rates of molecular evolution, as well as frequent exposure to hybridization and introgression, often make it difficult to discriminate species of vascular plants with the standard barcode markers (rbcL, matK, ITS2). Previous studies have examined these constraints in narrow geographic or taxonomic contexts, but the present investigation expands analysis to consider the performance of these gene regions in discriminating the species in local floras at sites across Canada. To test identification success, we employed a DNA barcode reference library with sequence records for 96% of the 5108 vascular plant species known from Canada, but coverage varied from 94% for rbcL to 60% for ITS2 and 39% for matK. Using plant lists from 27 national parks and one scientific reserve, we tested the efficacy of DNA barcodes in identifying the plants in simulated species assemblages from six biogeographic regions of Canada using BLAST and mothur. Mean pairwise distance (MPD) and mean nearest taxon distance (MNTD) were strong predictors of barcode performance for different plant families and genera, and both metrics supported ITS2 as possessing the highest genetic diversity. All three genes performed strongly in assigning the taxa present in local floras to the correct genus with values ranging from 91% for rbcL to 97% for ITS2 and 98% for matK. However, matK delivered the highest species discrimination (~81%) followed by ITS2 (~72%) and rbcL (~44%). Despite the low number of plant taxa in the Canadian Arctic, DNA barcodes had the least success in discriminating species from this biogeographic region with resolution ranging from 36% with rbcL to 69% with matK. Species resolution was higher in the other settings, peaking in the Woodland region at 52% for rbcL and 87% for matK. Our results indicate that DNA barcoding is very effective in identifying Canadian plants to a genus, and that it performs well in discriminating species in regions where floristic diversity is highest.

Background DNA-based testing has been gaining acceptance as a tool for authentication of a wide range of food products; however, its applicability for testing of herbal supplements remains contentious. Methods We utilized Sanger and Next-Generation Sequencing (NGS) for taxonomic authentication of fifteen herbal supplements representing three different producers from five medicinal plants: Echinacea purpurea, Valeriana officinalis, Ginkgo biloba, Hypericum perforatum and Trigonella foenum-graecum. Experimental design included three modifications of DNA extraction, two lysate dilutions, Internal Amplification Control, and multiple negative controls to exclude background contamination. Ginkgo supplements were also analyzed using HPLC-MS for the presence of active medicinal components. Results All supplements yielded DNA from multiple species, rendering Sanger sequencing results for rbcL and ITS2 regions either uninterpretable or non-reproducible between the experimental replicates. Overall, DNA from the manufacturer-listed medicinal plants was successfully detected in seven out of eight dry herb form supplements; however, low or poor DNA recovery due to degradation was observed in most plant extracts (none detected by Sanger; three out of seven–by NGS). NGS also revealed a diverse community of fungi, known to be associated with live plant material and/or the fermentation process used in the production of plant extracts. HPLC-MS testing demonstrated that Ginkgo supplements with degraded DNA contained ten key medicinal components. Conclusion Quality control of herbal supplements should utilize a synergetic approach targeting both DNA and bioactive components, especially for standardized extracts with degraded DNA. The NGS workflow developed in this study enables reliable detection of plant and fungal DNA and can be utilized by manufacturers for quality assurance of raw plant materials, contamination control during the production process, and the final product. Interpretation of results should involve an interdisciplinary approach taking into account the processes involved in production of herbal supplements, as well as biocomplexity of plant-plant and plant-fungal biological interactions.

Premise of the study: Constructing complete, accurate plant DNA barcode reference libraries can be logistically challenging for large-scale floras. Here we demonstrate the promise and challenges of using herbarium collections for building a DNA barcode reference library for the vascular plant flora of Canada. Methods: Our study examined 20,816 specimens representing 5076 of 5190 vascular plant species in Canada (98%). For 98% of the specimens, at least one of the DNA barcode regions was recovered from the plastid loci rbcL and matK and from the nuclear ITS2 region. We used beta regression to quantify the effects of age, type of preservation, and taxonomic affiliation (family) on DNA sequence recovery. Results: Specimen age and method of preservation had significant effects on sequence recovery for all markers, but influenced some families more (e.g., Boraginaceae) than others (e.g., Asteraceae). Discussion: Our DNA barcode library represents an unparalleled resource for metagenomic and ecological genetic ...

DNA-based testing has been gaining acceptance as a tool for authentication of a wide range of food products; however, its applicability for testing of herbal supplements remains contentious.We utilized Sanger and Next-Generation Sequencing (NGS) for taxonomic authentication of fifteen herbal supplements representing three different producers from five medicinal plants: Echinacea purpurea, Valeriana officinalis, Ginkgo biloba, Hypericum perforatum and Trigonella foenum-graecum. Experimental design included three modifications of DNA extraction, two lysate dilutions, Internal Amplification Control, and multiple negative controls to exclude background contamination. Ginkgo supplements were also analyzed using HPLC-MS for the presence of active medicinal components.All supplements yielded DNA from multiple species, rendering Sanger sequencing results for rbcL and ITS2 regions either uninterpretable or non-reproducible between the experimental replicates. Overall, DNA from the manufacturer-listed medicinal plants was successfully detected in seven out of eight dry herb form supplements; however, low or poor DNA recovery due to degradation was observed in most plant extracts (none detected by Sanger; three out of seven-by NGS). NGS also revealed a diverse community of fungi, known to be associated with live plant material and/or the fermentation process used in the production of plant extracts. HPLC-MS testing demonstrated that Ginkgo supplements with degraded DNA contained ten key medicinal components.Quality control of herbal supplements should utilize a synergetic approach targeting both DNA and bioactive components, especially for standardized extracts with degraded DNA. The NGS workflow developed in this study enables reliable detection of plant and fungal DNA and can be utilized by manufacturers for quality assurance of raw plant materials, contamination control during the production process, and the final product. Interpretation of results should involve an interdisciplinary approach taking into account the processes involved in production of herbal supplements, as well as biocomplexity of plant-plant and plant-fungal biological interactions.