Search

Background The purpose of this study was to evaluate true change in leg length after open-wedge high tibial osteotomy (OWHTO) using three-dimensional (3D) assessments, examine the factors that influence leg lengthening and verify their validity in clinical practice. Methods Study 1: a retrospective case series simulation study, included 46 patients (55 knees) that underwent knee arthroplasty or HTO. OWHTO was simulated from preoperative computed tomography using 3D preoperative planning software. Uni- and multivariate regression analyses were conducted to identify predictors related to change in leg length. Study 2: a retrospective case series study, included 53 patients (55 knees) that underwent OWHTO in another institution. Change in leg length was measured preoperatively and 1 year postoperatively and was compared with the predicted change in leg length calculated using the formula obtained from Study 1. Results Study 1: the true change in leg length significantly increased and showed a strong correlation with the opening width. The change in leg length was predicted using the formula “change in leg length = opening width × 0.75–1.5.” Study 2: the predicted change in leg length showed no significant difference from the change in leg length 1 year postoperatively and a strong correlation with the measured change. Conclusions The true change in leg length after OWHTO was predicted using the formula obtained from the 3D model. Predicting the change in leg length preoperatively can be a basis to consider other HTOs.

Background Locomotive syndrome (LS) is a predictive factor of future motor dysfunction. Our aim was to evaluate the change in the total LS grade and, its the association with the Japanese Orthopaedic Association (JOA) hip score after total hip arthroplasty (THA) among patients with hip osteoarthritis. Methods This was a prospective case-control study of 72 patients who underwent primary THA. The functional outcomes were measured before, and at 6 and 12 months after THA. LS was evaluated using the following tests: stand-up test, 2-step test, and 25-question Geriatric Locomotive Function Scale (GLFS-25). In addition, factors affecting the improvement of LS grade were examined. Results Prior to THA, 7% and 93% of patients were classified as LS grades 1 and 2. At 6 months after THA, an improvement in the total LS grade was observed in 57% of patients, with this percentage further increasing to 65% at 1 year. Only the preoperative GLFS-25 was correlated with the preoperative JOA hip scores. The postoperative GLFS-25 and the two-step test were correlated with the postoperative JOA hip scores. The preoperative functional reach test (FRT) was significantly correlated with the total LS grade improvement. Conclusions THA can improve the total LS grade in 65% of patients at 1 year postoperatively. Improvement was largely achieved in the first 6 months after THA, with a change from LS grade 2 to grade 1. FRT could be used an indicator of the total LS grade improvement.

Background The reduction of microbial infections can substantially improve the success of implant surgery. The iodine-supported implants that were developed by us for infection prevention were featured at the recent International Consensus Meeting on Musculoskeletal Infection and were partly incorporated into the consensus guidelines. For future clinical application, we examined (1) whether iodine can be added to metals with different surface roughness, (2) differences in surface roughness before and after processing, and (3) the effect of sterilization on the iodine content. Methods Four Ti-6Al-4V metals were prepared with different surface roughness values by polishing, blasting and plasma spraying. Before and after processing, the surface structure of metals was observed using a scanning electron microscope and stylus instruments. Before and after sterilization, iodine contents were measured by X-ray fluorescence spectroscopy. Results After processing, sufficient iodine contents with an antimicrobial effect were detected for each metal. These iodine contents decreased after sterilization but were higher than the lowest content of iodine observed to have an antimicrobial effect in a previous study, indicating that the antimicrobial effect persists even after sterilization. After processing, surface roughness was greater for polishing metal. With general surface processing, iodine processing was possible. Conclusions Our results indicated that surface roughness is affected by the processing method and that the iodine content should be set according to the sterilization method. Considering these factors, iodine processing can be used for clinical applications.

There is limited understanding of anterior acetabular component overhang, which induces groin pain, in post-periacetabular osteotomy (PAO) hips during conversion to total hip arthroplasty (THA). The aim of the study were to determine the following: (1) the differences in the amount of acetabular component overhang among pre-PAO hips and post-PAO hips in simulating THA; (2) the factors associated with the amount of component overhang in THA following PAO; (3) whether high component placement with elevation of the hip center by 10 mm reduces the amount of component overhang compared to the anatomical component position in THA following PAO. Computer-based simulations of acetabular component implantation were performed using preoperative and postoperative CT data from 30 patients undergoing PAO. Implantation was performed thrice in each patient: in pre-PAO hips (anatomical component position) and post-PAO hips (anatomical and high component position). Component overhang was measured on the axial plane, which passes through the component center. Overhang was greater in post-PAO hips [mean (SD) overhang: 5.2 (2.9) mm, pre-PAO hips: 10.2 (4.6) mm, post-PAO hips-mean difference, 5.0 mm; p

Background A few previous studies have investigated patient satisfaction after total hip arthroplasty (THA) according to the degree of pelvic deformity. This study compared patient-reported outcomes after primary THA for Crowe types III, IV and I dysplasia. Methods This retrospective, single-center, single-surgeon case-control study included patients who underwent primary THA between 2008 and 2016. We sent postal questionnaires to 38 patients with Crowe type III and IV dysplasia. Among the questionnaire respondents, 23 patients, excluding those with a follow-up period of Results The H and control groups were not significantly different in the postoperative JOA scores and SF-36. In the H group, VAS at the final follow-up was significantly higher, and significantly more patients felt that postoperative rehabilitation was serious, expressing that they underwent THA for LLD correction. In addition, the VAS scores in the FO group was higher than those in the N-FO group. Postoperative LLD was significantly greater in the H group than in the control group. Each group had an NPS of > 50. Conclusion The postoperative VAS score was higher in Crowe type III and IV dysplasia than in Crowe type I dysplasia, but no significant differences were detected in the postoperative satisfaction, JOA score, and SF-36 score. These findings may help explain the effects of THA preoperatively to patients with Crowe type III and IV dysplasia. Level of evidence Therapeutic Level 3b.

Background Intraoperatively acquired pressure ulcers are serious postsurgical complications requiring additional treatment, reoperation, and extended hospitalization. No study has investigated the frequency of the ulcers caused by compression with a pelvic positioner, which is used in hip surgeries to stabilize patients in the lateral decubitus position. Methods This retrospective study investigated the risk factors and the frequency of the ulcers caused by the use of pelvic positioners in hip surgeries. The records of patients who underwent surgical procedures under general anesthesia at our institution between January 1, 2016 and March 31, 2018 were reviewed. The inclusion criterion for the assessment of risk factors was hip surgery in the lateral decubitus position stabilized by a pelvic positioner. The exclusion criteria were patients with trauma, missing data, or a pre-existing pressure ulcer. Finally,.the study included 229 patients (265 hip surgeries). All the patients were positioned in the lateral decubitus position with the assistance of either a pelvic positioner, which had a single support fixture located over the pubic symphysis or a double support fixture located over the bilateral anterior superior iliac spine. Intraoperatively acquired pressure ulcers were diagnosed when ulcers were absent on admission and the redness that was observed immediately after surgery remained after 24 h. Multivariate analysis was used to identify factors associated with an increased risk for ulcers. Results Ulcers developed in 8 of 1810 (0.44%) patients who underwent orthopedic surgery. Seven of the 265 (2.64%) patients who underwent hip surgery in the lateral decubitus position stabilized by a pelvic positioner developed ulcers. All ulcers were located on areas of the body that were compressed by the pelvic positioner. After identifying controls for patient height (less than 154 cm), surgery duration (longer than 180 min), blood loss (more than 355 ml), and type of pelvic positioner used, we identified the independent risk factors for ulcers to be patient height p-value, 0.032) and the use of pelvic positioners with pubic bone support (adjusted odds ratio, 10.53; p-value, 0.047). Conclusion The use of pelvic positioners with pubic bone support should be avoided in patients with a height of

Background Clinical outcomes of total hip arthroplasty (THA) for Crowe type IV are poorer than for Crowe type I, because it is more difficult to accurately position the acetabular components. This study aimed to examine the accuracy of the computed tomography (CT)-based navigation system for acetabular component positioning in primary THA for Crowe type IV. Methods From 2006 to 2018, 29 patients who underwent 34 primary THAs for Crowe type IV were enrolled in the “Type IV” group and 32 patients who underwent 34 THAs for Crowe type I were enrolled in the “Type I” group, formed by matching patients in the Type IV group on age, gender, body mass index, and surgical approach. We investigated (1) the accuracy of the cup size between that at preoperative planning and that actually implanted and (2) the mean deviation of the cup angle and 3-dimensional position of acetabular components between preoperative plan and postoperative records. Results The accuracy of the cup size was 79.4% and 94.1% in the Type IV and Type I groups, respectively, without a statistically significant change detected (P = .075). The mean deviations of the cup angle and 3-dimensional position were comparable in both groups. Conclusion Using the CT-based navigation system, it was possible to accurately implant the acetabular component for Crowe type IV, and the accuracy was comparable to that for Crowe type I. The CT-based navigation system is a useful intraoperative tool to accurately implant the acetabular component, especially with severe pelvic deformities such as Crowe type IV.

Understanding the morphology of the superior aspect of the proximal femur is critical for treating femoral fracture. We assessed the correlation among the ideal insertion point of the femoral nail, femur head-neck axis, and native anteversion. One hundred patients with normal femurs were included in this study. Computed tomography (CT) images of the proximal femur superior aspect and amount of native anteversion were acquired. Generalised Procrustes analysis showed the morphological characteristics of the superior proximal femur according to native anteversion amount. Morphological characteristics were represented by 4 parameters; the correlation between parameters and native anteversion was investigated using CT data. The passing point of the line from the proximal femoral canal parallel to the native anteversion at the greater trochanter was located more posteriorly (mean 35.6%); the passing point of native anteversion was posterior in the femoral neck and head, although the line of the head-neck centre passed more anteriorly at the greater trochanter (mean 67.5%). This posterior translation was significantly associated with native anteversion amount. Morphometric geometric analysis showed that the lag screw could not pass head-neck centre from the nail inserted into proximal femoral canal. Anterior insertion of the nail was needed for positioning the lag screw centre.

To investigate whether anatomic and straight stems could reproduce the anteroposterior distance (AD) of the native femoral head and evaluate the effect of AD of the femoral head on range of motion (ROM) and bony impingement. This retrospective simulation study included 64 patients who had undergone primary total hip arthroplasty between 2012 and 2014. Using computed tomography (CT)–based templating software, anatomic and straight stems were inserted with same alignment. AD of the head centre was compared between the two stems and native anatomy. Furthermore, post-operative ROM was calculated, and correlation between AD and ROM was assessed. There was a strong positive correlation between native anteversion (mean 21.9°) and anatomic stem anteversion (mean 22.5°) (R = 0.975, P

BACKGROUND Anterior overhang of the acetabular component is associated with iliopsoas impingement, which may cause groin pain and functional limitations after THA. However, little is known about the relationship between component overhang and functional alignment of the acetabular component. CT-based image simulation may be illuminating in learning more about this because CT images are more effective than radiographs for evaluating the component's overhang and position. QUESTIONS/PURPOSES Using CT simulations based on preoperative data of nondysplastic and dysplastic hips, we asked: (1) What are the differences in the amount of component overhang, defined as the mediolateral distance from the component's edge to the native acetabular bony boundary on axial images (axial overhang), and as the AP distance on sagittal images (sagittal overhang) among pelvises with neutral and posterior tilt (in which the cephalad portion of the pelvis is more posterior than the caudad portion in the sagittal plane) in patients with dysplastic hips and those with nondysplastic hips? (2) Are increments in the amount of component overhang associated with a difference in the likelihood that the iliopsoas tendon will impinge against the edge of the acetabular component, after controlling for native acetabular abduction and anteversion and the presence of dysplasia? METHODS A total of 128 hips (dysplastic group: 73 hips; nondysplastic group: 55 hips) were evaluated. We defined a dysplastic hip as one with a lateral center-edge angle of less than 20° on AP radiographs. Pelvic models with neutral (0°) and 10° and 20° of posterior tilt were created from CT data. In simulations, acetabular component models were implanted into the true acetabulum with a tilt-adjusted orientation angle that was defined as the component's angle based on a reference for the functional pelvic plane (coronal plane of the body) in each pelvic model. Axial and sagittal component overhang were measured on CT images. Axial overhang of at least 12 mm and sagittal overhang of at least 4 mm were defined as thresholds increasing the likelihood of iliopsoas impingement according to previous studies. When determining the amount of overhang of the acetabular component, we controlled for abduction and anteversion of the native acetabulum and the presence of dysplasia by performing a multivariable logistic regression analysis. RESULTS In dysplastic hips, axial overhang increased by a mean ± SD of 5 ± 1 mm (Bonferroni adjusted p < 0.001; 95% CI, 4.7-5.1) from 0° to 10° of posterior tilt and by 5 ± 1 mm (p < 0.001; 95% CI, 4.9-5.3) from 10° to 20° of posterior tilt. Sagittal overhang increased by 1 ± 0 mm (p < 0.001; 95% CI, 1.0-1.0) from 0° to 10° of posterior tilt and by 1 ± 0 mm (p < 0.001; 95% CI, 1.0-1.0) from 10° to 20° of posterior tilt. In nondysplastic hips, axial overhang increased by a mean of 5 ± 0 mm (p < 0.001; 95% CI, 4.7-5.0) from 0° to 10° of posterior tilt and by 5 ± 1 mm (p < 0.001; 95% CI, 4.6-5.0) from 10° to 20° of posterior tilt. Sagittal overhang increased by 1 ± 0 mm (p < 0.001; 95% CI, 1.0-1.1) from 0° to 10° of posterior tilt and by 1 ± 0 mm (p < 0.001; 95% CI, 1.0-1.1) from 10° to 20° of posterior tilt. After controlling for the presence of dysplasia, we found that native acetabular abduction and anteversion and posterior pelvic tilt, presence of dysplasia (p = 0.030; adjusted odds ratio [OR], 2.2; 95% CI, 1.1-4.6), native acetabular anteversion (p < 0.001; adjusted OR, 1.4; 95% CI, 1.3-1.5), and 10° and 20° of backward tilt compared with 0° of tilt (10° of posterior tilt: p < 0.001; adjusted OR, 15; 95% CI, 5.5-41; 20° of posterior tilt: p < 0.001; adjusted OR, 333; 95% CI, 96-1157) were independently associated with axial overhang of at least 12 mm; the model showed high goodness of fit (Nagelkerke's r = 0.68). In contrast, native acetabular anteversion (p < 0.001; adjusted OR, 1.2; 95% CI, 1.1-1.2) and 20° of backward tilt compared with 0° of tilt (p = 0.015; adjusted OR, 2.2; 95% CI, 1.2-4.0) were independently associated with sagittal overhang of at least 4 mm; the model had low goodness of fit (Nagelkerke's r = 0.20). CONCLUSIONS Acetabular component overhang is more severe when the pelvis tilts posteriorly. Moreover, posterior pelvic tilt, the presence of dysplasia, and higher native acetabular anteversion were independently associated with an increased risk of component overhang. When 20° of posterior tilt was adjusted, the risk of severe overhang was especially increased. CLINICAL RELEVANCE Based on these results, surgeons can attempt to prevent severe overhang in patients with posterior pelvic tilt by increasing component anteversion and abduction; when component anteversion is increased by 8° and abduction is increased by 2° from the target angle of 15° of anteversion and 40° of abduction in patients with posterior tilt of 20°, the risk of severe overhang is reduced to by approximately one-twentieth. However, it is still unclear how much the degree of component anteversion should be increased when surgeons attempt to prevent anterior prosthetic dislocation at the same time. Future studies such as prospective clinical trials evaluating both prosthetic dislocation and iliopsoas impingement in patients with posterior tilt might clarify this issue.

BACKGROUND: We developed iodine-coated titanium implants to suppress microbial activity and prevent periprosthetic joint infection (PJI); their efficacy was demonstrated in animal and in vitro models. The iodine content in iodine-coated implants naturally decreases in vivo. However, to our knowledge, the effect of reduced iodine content on the implant’s antimicrobial activity has not been evaluated to date. QUESTIONS/PURPOSES: (1) How much does the iodine content on the implant surface decrease after 4 and 8 weeks in vivo in a rat model? (2) What effect does the reduced iodine content have on the antimicrobial effect of the implant against multiple bacteria in an in vitro model? METHODS: This experiment was performed in two parts: an in vivo experiment to determine attenuation of iodine levels over time in rats, and an in vitro experiment in which we sought to assess whether the reduced iodine content observed in the in vivo experiment was still sufficient to deliver antimicrobial activity against common pathogens seen in PJI. For the in vivo experiment, three types of titanium alloy washers were implanted in rats: untreated (Ti), surface-anodized to produce an oxide film (Ti-O), and with an iodine layer on the oxidation film (Ti-I). The attenuation of iodine levels in rats was measured over time using inductively coupled plasma-mass spectrometry. Herein, only the Ti-I washer was used, with five implanted in each rat that were removed after 4 or 8 weeks. For the 4- and 8-week models, two rats and 15 washers were used. For the in vitro study, to determine the antibacterial effect, three types of washers (Ti, Ti-O, and Ti-I) (nine washers in total) were implanted in each rat. Then, the washers were removed and the antibacterial effect of each washer was examined on multiple bacterial species using the spread plate method and fluorescence microscopy. For the spread plate method, six rats were used, and five rats were used for the observation using fluorescence microscopy; further, 4- and 8-week models were made for each method. Thus, a total of 22 rats and 198 washers were used. Live and dead bacteria in the biofilm were stained, and the biofilm coverage percentage for quantitative analysis was determined using fluorescence microscopy in a nonblinded manner. Ti-I was used as the experimental group, and Ti and Ti-O were used as control groups. The total number of rats and washers used throughout this study was 24 and 213, respectively. RESULTS: Iodine content in rats implanted with Ti-I samples decreased to 72% and 65% after the in vivo period of 4 and 8 weeks, respectively (p = 0.001 and p < 0.001, respectively). In the in vitro experiment, the Ti-I implants demonstrated a stronger antimicrobial activity than Ti and Ti-O implants in the 4- and 8-week models. Both the median number of bacterial colonies and the median biofilm coverage percentage with live bacteria on Ti-I were lower than those on Ti or Ti-O implants for each bacterial species in the 4- and 8-week models. There was no difference in the median biofilm coverage percentage of dead bacteria. In the 8-week model, the antibacterial activity using the spread plate method had median (interquartile range) numbers of bacteria on the Ti, Ti-O, and Ti-I implants of 112 (104 to 165) × 10(5), 147 (111 to 162) × 10(5), and 55 (37 to 67) × 10(5) of methicillin-sensitive Staphylococcus aureus (Ti-I versus Ti, p = 0.026; Ti-I versus Ti-O, p = 0.009); 71 (39 to 111) × 10(5), 50 (44 to 62) × 10(5), and 26 (9 to 31)× 10(5) CFU of methicillin-resistant S. aureus (Ti-I versus Ti, p = 0.026; Ti-I versus Ti-O, p = 0.034); and 77 (74 to 83) × 10(6), 111 (95 to 117) × 10(6), and 30 (21 to 45) × 10(6) CFU of Pseudomonas aeruginosa (Ti-I versus Ti, p = 0.004; Ti-I versus Ti-O, p = 0.009). Despite the decrease in the iodine content of Ti-I after 8 weeks, it demonstrated better antibacterial activity against all tested bacteria than the Ti and Ti-O implants. CONCLUSION: Iodine-coated implants retained their iodine content and antibacterial activity against methicillin-sensitive S. aureus, methicillin-resistant S. aureus, and P. aeruginosa for 8 weeks in vivo in rats. To evaluate the longer-lasting antibacterial efficacy, further research using larger infected animal PJI models with implants in the joints of both males and females is desirable. CLINICAL RELEVANCE: Iodine-coated titanium implants displayed an antibacterial activity for 8 weeks in rats in vivo. Although the findings in a rat model do not guarantee efficacy in humans, they represent an important step toward clinical application.

Objectives Although both sarcopenia and hip disease decrease physical function, few studies have investigated the association. We investigated the prevalence of sarcopenia in patients awaiting total hip arthroplasty for osteoarthritis and examined the impact of sarcopenia on pre- and postoperative outcomes. Methods This prospective study included 96 females. Participants were classified using two criteria. Cases defined as having sarcopenia by the Asian Working Group for Sarcopenia (AWGS) criteria were categorized as the AWGS-sarcopenia (A-S) group, and others were categorized as the AWGS-non-sarcopenia (A-NS) group. Those classified by hand grip strength (HGS) constituted the lower-HGS (L-H) and normal-HGS (N-H) groups. Patient demographics, physical function, and Japanese Orthopaedic Association (JOA) score were compared between each group. Results The prevalence of the AWGS sarcopenia was 33.3%. In the pre- and postoperative analyses, the L-H group had significantly poorer physical function and JOA score than the N-H group. Postoperatively, the A-S group only demonstrated poorer HGS. Conclusion Preoperative physical function and JOA score was significantly poorer in the L-H group; physical function was significantly poorer even postoperatively. A HGS test is useful for detecting a decline in the pre- and postoperative physical function in females with hip osteoarthritis.

Background Subcutaneous adipose tissue represents an abundant source of multipotent adult stem cells named as Adipose-derived stem cells (ADSCs). With a cell sheet approach, ADSCs survive longer, and can be delivered in large quantities. We investigated whether intra-articular ADSC sheets attenuated osteoarthritis (OA) progression in a rabbit anterior cruciate ligament transection (ACLT) model. Methods Fabricating medium containing ascorbate-2-phosphate was used to enhance collagen protein secretion by the ADSCs to make ADSC sheets. At 4 weeks after ACLT, autologous ADSC sheets were injected intra-articularly into the right knee (ADSC sheets group), and autologous cell death sheets treated by liquid nitrogen were injected into the left knee (control group). Subsequent injections were administered once weekly. Femoral condyles were compared macroscopically and histologically. Results Macroscopically, OA progression was significantly milder in the ADSC sheets than in the control groups. Histologically, control knees showed obvious erosions in the medial and lateral condyles, while cartilage was retained predominantly in the ADSC sheets group. Immunohistochemically, MMP-1, MMP-13, ADAMTS-4 were less expressive in the ADSC sheets than in the control groups. Conclusions Periodic ADSC sheets injections inhibited articular cartilage degeneration without inducing any adverse effects. A large quantity of autologous ADSCs delivered by cell sheets homed to the synovium and protected chondrocytes.

Purpose:The mechanisms underlying thigh pain in patients with well-fixed cementless femoral components after total hip arthroplasty (THA) remains unclear. We hypothesized that the thigh pain is correlated with the initial contact state of the stem and aimed to investigate the relation between thigh pain and the initial contact state.Materials and methods:A total of 209 hips of 184 patients were analysed in this retrospective case–control study. The patients were divided into a thigh pain group ( n = 13 hips) and a control group (without thigh pain, n = 196). Post-operative stem contact images were three-dimensionally visualized by a density mapping function using computed tomography data, which quantified the stem contact area according to Gruen zones. Thigh pain was defined as anterior or anterolateral pain upon loading at 3-month post-operatively.Results:Thirteen hips (6.2%) had thigh pain; however, all the hips demonstrated stable bony ingrowth radiographically. The thigh pain group had a significantly lower contact area in zone 2 ( p = 0.014). The multivariate logistic regression analysis showed that the contact area of zone 2 was negatively correlated with thigh pain [odds ratio (OR): 0.858, p = 0.018], and the canal flare index was negatively correlated with the development of thigh pain (OR: 0.336, p = 0.026).Conclusions:We identified an association between the initial contact state and post-operative thigh pain. Our data demonstrated that proper lateral contact prevents the occurrence of thigh pain in THA using a tapered wedge stem.

A computed tomography (CT)-based hip navigation system is a useful tool for achieving precise implant alignment angle. However, it has the disadvantage of prolonged procedure duration. A prolonged procedure duration may increase the incidence of postoperative surgical site infection (SSI) or periprosthetic joint infection (PJI) following primary THA. Studies identifying whether CT-based hip navigation system increases the incidence of SSI and PJI compared to the free-hand technique for total hip arthroplasty (THA) are rare. The study aimed to assess whether the CT-based hip navigation system can cause SSI and PJI compared to the free-hand technique. We investigated 366 patients with osteoarthritis who completed the minimum 2-year follow-up and underwent primary THAs (n = 435), including 70 hips in 62 patients of the non-navigation group and 365 hips in 304 patients of the navigation group. We compared the incidence rate of SSI and PJI between the non-navigation group and navigation group. Only three patients in the navigation group (0.8%) developed SSI or PJI, while no patient developed SSI or PJI in the non-navigation group. There was no significant difference in the incidence rate of SSI or PJI between the two groups (P = 1.0), although the mean operation time in the navigation group was about 20 min longer. CT-based hip navigation system may not be associated with SSI or PJI after primary THA, although it prolongs the operation time.

In THA, using a larger femoral head can increase the oscillation angle and jumping distance. However, there have been no reports which indicate precisely how increasing the jumping distance leads to an increase in the angle from impingement to dislocation (jumping angle). In this study, we clarified the jumping angle of various head diameters and its relationship with pelvic morphology. Using a three-dimensional templating system, virtual THA and ROM simulations were performed in 82 patients. We investigated the distance between bony and prosthetic impingement points and the head centre and calculated the jumping angle for various head diameters. We measured various pelvic shapes and length to clarify the relationship between pelvic morphology and impingement distance. Jumping angles were 7.7° ± 3.2°, 12.1° ± 1.6°, 15.4° ± 2.5° and 10.0° ± 3.0° with flexion, internal rotation with 90° flexion (IR), extension and external rotation (ER), respectively, when we used a 22-mm head diameter. Bony jumping angle increased about 0.5°, 0.8°, 1.0° and 0.7° per 2-mm increase in head diameter with flexion, IR, extension and ER. On the other hand, prosthetic jumping angle remained almost stable at about 31°. Impingement distance was related to pelvic morphology in all directions. Bony jumping angles differed with ROM; the biggest was seen with extension, followed by IR, ER and flexion. On the other hand, bony jumping angle was less than prosthetic jumping angle in all cases. Bony jumping angles differed with ROM; the biggest was seen with extension, followed by IR, ER and flexion. Prosthetic impingement angles were stable. In addition, the bony jumping angle was less than the prosthetic jumping angle in all cases.

Past reports showed good mid-term results of RHA for Japanese patients. However, few reports have compared the mid- to long-term results for RHA in Japanese patients with and without osteoarthritis. Therefore, this study investigated the mid- to long-term results of RHA in Japanese patients with osteoarthritis compared to those without. We conducted a retrospective review of a consecutive series of 92 hips in 80 patients (59 men and 21 women). The minimum follow-up period was 5 years. The JOA hip scoring system was used to clinically evaluate hip function. In the radiological assessment, stem-shaft angle, inclination of the acetabular component, postoperative complications, and adverse reactions around RHA were evaluated. The 10-year survival rate using the Kaplan-Meier method was investigated to compare patients with and without osteoarthritis. A significant difference was observed between the preoperative and postoperative JOA hip scores of either group. Also, the radiological assessment revealed no significant changes in either group. All three revision THAs were performed on patients in the only non-osteoarthritis group. In the osteoarthritis group, the 10-year survival rate was 94% (95% CI 81.8-100) in males and 100% (95% CI 100) for females; in the non-osteoarthritis group, the rate was 80% (95% CI 55.1-100) in males and 66.7% (95% CI 13.3-100) for females. In conclusion, this study showed good mid- to long-term clinical results for young Japanese osteoarthritis patients, with less satisfactory mid- to long-term results in patients without osteoarthritis.

This study investigated the influence of the rotation of innominate bone on anterior pelvic plane (APP) tilt, the angle formed by the APP, and coronal plane of the body to determine whether the provision of proper information about the sagittal balance of the body by the value of the APP tilt (APPT). In total, 244 patients (171 females, 73 males) who were candidates for total hip or knee arthroplasty, periacetabular osteotomy, or shelf arthroplasty were included. The rotational angle of the innominate bone was quantified using computed tomography images at the level of the anterior superior, and anterior inferior iliac spine, and ischiopubic portion. Clustering analysis was performed to identify subtypes of innominate bone rotation. High, intermediate, and low internal rotational alignment groups were identified in females, characterized by rotational angles. Males were treated as one group, and no intergroup differences were observed in sacral slope (SS) and pelvic incidence. However, intergroup differences in APPT were found, indicating a variation in APPT irrespective of sagittal body balance. A negligible relationship between SS and APPT was observed in the high-internal-rotation group, intermediate-internal-rotation group, and male group, whereas a moderate correlation found in the low-internal-rotation group (r = .59). The results could suggest surgeons that the value of the APPT provides no information on the sagittal balance; therefore, it may be ignored for acetabular component positioning during preoperative planning for total hip arthroplasty.

Limb lengthening after total knee arthroplasty (TKA) has been reported in some cases, all of which were evaluated using two-dimensional images. To our knowledge, no case has been evaluated using three-dimensional (3D) images. We investigated 3D limb lengthening after TKA.We simulated 100 varus knees using 3D templating software. Virtual TKA was performed to maintain the original joint line by conducting a measured-resection technique. We examined the relationships of 3D distance between the femoral head center and ankle center before and after TKA, degree of hip-knee-ankle angle (HKA) improvement, and degree of flexion contracture angle improvement.All cases showed limb lengthening (average, 9.4 ± 6.0 mm). The coefficients of correlation with limb lengthening and the degree of HKA improvement and the degree of flexion contracture angle improvement were good (0.730 and 0.751, respectively). The correlation between the degree of total improvement (the degree of HKA improvement + the degree of flexion contracture angle improvement) and limb lengthening was strong (r = 0.896).The expected limb lengthening when performing measured-resection TKA is expressed as 0.58 × (the degree of HKA improvement + the degree of flexion contracture angle improvement) mm and is a useful index.

Background A few reports have shown that the reliability of the Japanese Orthopaedic Association stage classification of hip osteoarthritis was not high. The objective of this study was to assess the reliability of the stage classification of coxarthrosis, and to evaluate whether a modification of the classification improves reliability. Materials and methods We retrospectively investigated 200 hips in 100 patients with hip pain. We collected radiographs of their hip joints with the patients in both a supine and a standing position. Four orthopaedic surgeons evaluated the stage of coxarthrosis employing the JOA classification. The percentage of agreement of examiners and the value of the kappa statistic were calculated. Furthermore, to improve the reliability of classification, we modified the classification based on previous reports. Partial narrowing of the joint space and disappearance of the joint space were defined as maintained if it was 2 mm or more, and as the width of the loss of joint space that was 10 mm or more respectively. Using this classification, the same examiners assessed the stage on the same radiographs again three months after the previous evaluation. Results The percentages of agreement were 28.5% and 27% and the interobserver value of the kappa statistic was 0.45 and 0.44 in supine and standing position respectively. After modification of the classification, the percentages of agreement were 36.5% and 44% and the interobserver value of the kappa statistic was 0.48 and 0.56 in supine and standing positions respectively, and the intraobserver value of the kappa statistic was 0.55. The modification significantly improved the reliability only in the percentage of the agreement for the standing position. Conclusion This study showed that the reliability of the JOA stage classification of coxarthrosis was not as high as previous reports have showed. Modification of the classification improved interobserver reliability.

AimsWe analyzed the acetabular morphology of Crowe type IV hips using CT data to identify a landmark for the ideal placement of the centre of the acetabular component, as assessed by morphometric geometrical analysis, and its reliability.Patients and MethodsA total of 52 Crowe IV hips (42 patients; seven male, 35 female; mean age 68.5 years (32 to 82)) and 50 normal hips (50 patients; eight male, 42 female; mean age 60.7 years (34 to 86)) undergoing total hip arthroplasty were retrospectively identified. In this CT-based simulation study, the acetabular component was positioned at the true acetabulum with a radiological inclination of 40° and anteversion of 20°. Acetabular shape and the position of the centre of the acetabular component were analyzed by morphometric geometrical analysis using the generalized Procrustes analysis.ResultsThe acetabular shapes of Crowe IV hips were distinctively triangular; the ideal position of the centre of the acetabular component was superior on the posterior bony wall. The first and second relative warps explained 34.2% and 18.4% of the variance, respectively, compared with that of 28.6% and 18.0% in normal hips. We defined the landmark as one-third the distance from top on the posterior bony wall in Crowe IV hips. The average distance from the centre of the acetabular component was 5.6 mm.ConclusionCrowe IV hips are distinctively triangular; the point one-third from the top on the posterior bony wall was a useful landmark for placing the acetabular component.

Purpose: Cup setting with only an alignment guide has been reported to be inaccurate in the lateral decubitus position in total hip arthroplasty (THA). We assessed the accuracy of cup positioning using only the alignment guide technique via a modified Watson Jones approach in the lateral decubitus position. Methods: Two hundred hips of 189 patients underwent THA from October 2014 to September 2016 via a modified Watson Jones approach. In the final sample, 181 hips of 171 patients (35 males, 136 females) were included in this investigation. The alignment of the cup was evaluated by an anteroposterior radiograph of the pelvis 1 week after surgery. Measurements were divided into safe zone determined by Callanan and Lewinnek. Results: There were 168 (92.8%) acetabular cups that were placed within the safe zone for both inclination and anteversion based on the safe zones defined by Lewinnek, and 134 (74%) acetabular cups that were placed within the safe zone defined by Callanan. Multiple logistic analysis showed that the laterality and the addition of the confirmation method were indicators for malpositioning of combined inclination and anteversion. Conclusion: Our data suggested that even if special tools were not used in the lateral decubitus position, using only the alignment guide enabled cup positioning to be achieved with 92.8% accuracy in the Lewinnek safe zone and 74% accuracy in the Callanan safe zone. Multiple logistic analysis showed that the laterality and the addition of a confirmation alignment guide influenced the accuracy of cup positioning.

Background There have been no studies on the differences in impingement-free angle that result from different combined anteversion (CA) patterns. The aim of this study was to find the optimal CA pattern for achieving a favorable impingement-free angle, including bony and prosthetic impingement, in total hip arthroplasty. Methods We evaluated 100 patients with no hip arthritis. We investigated the impingement-free angle (flexion, internal rotation with 90° flexion, extension, and external rotation) after changing the stem and cup anteversions to satisfy several CA patterns [cup anteversion + stem anteversion = 30°, 40°, 50°, and 60°; cup anteversion + 0.7 × stem anteversion = 37.3° (:Widmer's theory); and cup anteversion + 0.77 × stem anteversion = 43.3° (:Yoshimine's theory)] using 3-dimensional templating software. Results The impingement-free angle changed dramatically among the various CA patterns. The optimal CA was changed by various stem anteversion. Only CA: Widmer with stem anteversion of 20° satisfied daily-life range of motion (ROM) requirements (flexion ≥130°, internal rotation with 90° flexion ≥ 45°, extension ≥ 40°, external rotation ≥ 40°). Conclusion Good impingement-free angle cannot be obtained with single fixed CA. Different CA patterns should be used, depending on the differences in the stem anteversion. A CA of 30° with 0° ≤ stem anteversion ≤10°; a CA:Widmer with 20° of stem anteversion; a CA of 40° or Widmer with 30° of stem anteversion. When stem anteversion is ≥40°, CA should be decided by each patient's state. Among them, a stem anteversion of 20° with cup anteversion of 23.3° was found to be the best CA pattern.

The influence of stem sagittal alignment on clinical outcomes is unclear in total hip arthroplasty (THA). The purpose of this study is to assess the relationship between stem sagittal alignment and clinical and radiographic outcomes using 3D-CT. We performed 370 consecutive primary THAs between 2009 and 2013. After exclusion, 102 hips in 89 patients using single tapered-wedge stem were included. Mean follow-up was 4.7 years. Stem sagittal alignment was measured using CT, and patients were divided into flexion and neutral alignment groups. Clinical and radiographic outcomes were compared between two groups. Furthermore, we evaluated the anterior femoral offset and initial contact state. There were no significant differences in clinical or radiographic outcomes between two groups. CT data analysis and multiple regression analysis showed flexion alignment increased anterior femoral offset (AFO) and Gruen zone 4 contact area. There was no significant difference in clinical or radiographic outcomes between flexion and neutral alignment of the tapered-wedge stem at an average of 4.7 years of follow-up. The increase of AFO and distal contact area in flexion alignment could affect the improvement of impingement-free range of flexion and intraoperative fracture.

There is no documented maximum amount that an extremity can be safely lengthened in primary total hip arthroplasty (THA) without neurologic or soft tissue complications. We retrospectively reviewed patients who underwent primary THA with acute limb lengthening and investigated the safety range for acute limb lengthening in primary THA. This study included 61 hips in 52 patients who underwent primary THA with acute limb lengthening (more than 2.5 cm) without femoral shortening osteotomy. The amount of lengthening was measured from pre-operative and post-operative X-ray films using computer graphics software, then the ratios of the amount of lengthening to femoral length (L/F ratio = amount of lengthening / femoral shaft length × 100) were calculated. We investigated correlation with nerve and soft tissue complications at operation in regard to this index. The average amount of lengthening was 3.0 cm (2.5 to 4.8). The average L/F ratio was 7.9 (6.2 to 12.9). There were seven nerve complications and two soft tissue complications in the whole series. In all nine complications, eight indicated higher L/F ratios than 8.7. Altogether, 12 hips indicated a higher L/F ratio than 8.7; 66% of them showed neurological or soft tissue problems. ROC curve analysis indicated that the optimal cutoff value of the L/F ratio was 8.7, which predicted acute lengthening-related complications with a sensitivity of 88.9% and a specificity of 92.3% (AUC = 0.88). The patients who underwent THA with acute lengthening of more than 8.7% of femoral shaft length are at high risk of complications caused by acute limb lengthening in primary THA.

Purpose During total knee arthroplasty, few rotating reference axes can be reliably used after tibial resection. We speculated that a line that passes through the lateral edge of the posterior cruciate ligament (PCL) at its tibial attachment after resection and the most prominent point of the tibial tubercle [after-tibial resection (ATR) line] will provide a good reference axis. In this study, we aimed to evaluate the association between ATR and Akagi’s lines. Materials and methods In this case–control simulation study, we retrospectively evaluated 38 patients with varus knee and 28 patients with valgus knee. We defined the reference cutting plane as 10 mm distal from the lateral articular surface of the tibia in varus group and as 7 mm distal from the medial articular surface in the valgus group. We measured angles between Akagi’s line and the ATR line (ATR line angle) as well as between Akagi’s line and 1/3 Akagi’s line (1/3 Akagi’s line angle), which passes through the midpoint of PCL and the medial third of the patellar tendon. We used paired t-tests to determine the significance of differences between these angles, with p < 0.05 indicating statistical significance. Intra- and interclass correlation coefficients for the reproducibility of 1/3 Akagi’s line angle and ATR line angle were analyzed by two surgeons. Results We found that 1/3 Akagi’s line angle was 10.2° ± 1.3° in the varus group and 10.9° ± 1.3° in the valgus group (p = 0.017). The ATR line was positioned externally compared with Akagi’s line in all patients. Mean ATR line angles at 0°, 3° and 7° posterior slopes were 6.1° ± 1.9°, 5.8° ± 2.0° and 6.0° ± 1.7° in the varus group and 6.3° ± 2.3°, 6.2° ± 2.3° and 5.4° ± 2.1° in the valgus group, respectively. There were no significant differences in the ATR line angle between the varus and valgus groups. (p = 0.34–0.67) Intra- and interclass correlation coefficients for the reproducibility of 1/3 Akagi’s line angle were 0.936 and 0.986 and those for the reproducibility of ATR line angle were 0.811 and 0.839. Conclusions The ATR line was positioned between Akagi’s line and 1/3 Akagi’s line in all patients and was a valid option for evaluating rotational tibial alignment after tibial resection.

The "grand-piano sign" is a well-known indicator of proper rotational femoral alignment. We investigated changes in the shape of the femoral anterior cutting plane by changing the rotational alignment, anterior portion depth, and cutting plane flexion angle.We simulated various cutting planes after cutting the anterior portion of the femur next to the distal femoral osteotomy in 50 patients with varus knee and also a femoral anterior osteotomy with four degree (S group) and seven degree (T group) flexion angles regarding the mechanical axis. We defined the final cutting plane as the farthest position that we could reach without making a notch and the precutting plane as two millimeters anterior from the final cutting plane. The simulated resection plane was rotated to produce external and internal rotation angles of 0°, three degrees, and five degrees relative to the surgical transepicondylar axis (SEA). We investigated medial and lateral portions of the femoral anterior cutting plane length ratio (M/L).When we cut parallel to SEA, M/L was 0.67±0.09 and 0.62±0.12 in the T and S groups, respectively. M/L was approximately 0.8 and 0.5 with five degree internal and external rotations, respectively (P0.01). On comparing final cutting and precutting planes, there were no significant differences in M/L without five degree external rotation in the T group and no significant difference in any case in the S group (P0.01).The ideal M/L of the femoral anterior cutting plane was 0.62-0.67. M/L did not change with a precutting plane in almost all rotational patterns.

We investigated the various impingement angles (including both bony and prosthetic impingement) and impingement types that can occur after THA, even when the same combined anteversion parameter is used. We also investigated the relationship between impingement angle and acetabular morphology or femoral anteversion. We evaluated 83 patients with no hip arthritis. We divided them into six groups according to acetabular CE angle (≤15°, >15–≤25°, and >25°) and femoral anteversion (≤20° and >20°). Using three-dimensional templating software, we changed stem and cup anteversion to satisfy a combined anteversion (CA) of 50° in each hip (stem anteversion + cup anteversion = 50°) and investigated the resulting impingement angles. Even with the same CA, differences in impingement angle occurred: 18.3° ± 7.2° with flexion, 30.2° ± 9.7° with internal rotation at 90° flexion, 20.2° ± 12.5° with extension, and 26.2° ± 7.8° with external rotation. As stem anteversion increased, the impingement type changed from prosthetic impingement to bony impingement in flexion and internal rotation and from bony impingement to prosthetic impingement in extension and external rotation. The flexion angle and internal rotation angle at 90° flexion increased (p

In TKA, we have used the "projected SEA", which is obtained by projecting the "true SEA" on the distal femoral cutting plane in clinical practice to determine the femoral component rotation. There are no reports examining the accuracy of the "projected SEA". In this study, we investigated the difference between the "true SEA" and "projected SEA".The present study was a CT-based computer-simulated case series. We evaluated 34 knees without osteoarthritis changes. These patients were selected from the operative schedule prior to THA. We defined the "true SEA" on the 3D model and the "projected SEA" on the cutting plane parallel to the distal femoral axis obtained based on the "true SEA". We changed the cutting angles from 20° flexion to 20° extension, and from five degrees varus to five degrees valgus. We measured the "true SEA angle" and "projected SEA angle" regarding the posterior condylar axis (PCA).The mean "true SEA angle" was 3.04°±1.34° (0.6-5.0°). The mean "projected SEA angle" was 3.43°±1.58° at 20° flexion, 3.42°±1.56° at 0° flexion, 3.43°±1.52° at 20° extension, 3.39°±1.59° at five degrees valgus, and 3.39°±1.50° at five degrees varus. At each cutting angle, the "projected SEA angle" was significantly larger than the "true SEA angle" (p0.001). There was no significant difference between any of the "projected SEA angles" (p0.001).We found that the true SEA and projected SEA do not differ significantly (0.39°±0.29° [range 0-1.0°]).