Search

The purpose of this research was to evaluate the esthetic impact of orthodontic treatment need in adolescents.This cross-sectional study was performed with 1172 adolescents aged 12 (n = 638) years and 15 (n = 534) years from Salvador, Bahia, Brazil. The esthetic impact was the following outcome variables: Aesthetic Component of the Index of Orthodontic Treatment Need and the Oral Aesthetic Subjective Impact Scale. The normative orthodontic treatment need was assessed by the Dental Health Component of the Index of Orthodontic Treatment Need (IOTN-DHC) and by the Dental Aesthetic Index (DAI). Logistic regression models were adjusted, estimating crude odds ratio with the respective 95% confidence intervals. The variables with P ≤0.20 in the individual analyses were tested in multiple logistic regression models, remaining the variables with P ≤0.05.The results showed a statistically significant association for the esthetic impact (Aesthetic Component of the Index of Orthodontic Treatment Need and the Oral Aesthetic Subjective Impact Scale) when assessing the normative orthodontic treatment need by the DAI (P 0.05). However, there was no significant association between subjective esthetic impact and normative needs when using the IOTN-DHC (P 0.05).DAI was more associated with the adolescents' esthetic concern than IOTN-DHC and should be the Index of Orthodontic Treatment Need to be selected to complement the patient's self-perception.

Summary Objective The present study aimed to compare the force of aesthetic wires and their non-aesthetic equivalents from two commercial brands at different displacement points, during the unloading phase at 36 °C. Materials and methods Forty samples (n = 10) were assessed, which were presented in two groups of aesthetic wires and two groups of non-aesthetic wires from the brands GAC® (Dentsply GAC® International, NY, USA) and Aditek®(Cravinhos, SP, Brazil), with 0.016-inch gauge. The orthodontic wires were maintained at a temperature of 36 °C throughout the experiment and they were subjected to the three-point bending test at a speed of 1 mm/min. The unloading values were recorded as 0.5, 1.5, and 2.5 mm of displacement. The data were subjected to Student's t-test and unequal variance t test, at 5% significance level. Results During the unloading phase, the mean force was significantly higher for aesthetic wires than non-aesthetic ones, in the deflection of 2.5 mm, presenting values means of 2.25 N (P = .0213). In deflections of 0.5 mm and 1.5 mm, the orthodontic archwires did not show significant differences in force between the thermally activated wires with aesthetic coating and their non-aesthetic equivalents (P ≥ 0.05). Conclusion It is concluded that during the unloading phase at a temperature of 36 °C, the orthodontic archwires analyzed did not show significant difference in force between thermally activated wires with aesthetic coating and their non-aesthetic equivalents at most displacement points analysed, except for the deflection of 2.5 mm, which showed higher values.

Introduction This study aimed to explore the perception of orthodontic treatment need by using the Dental Aesthetic Index (DAI) and the Index of Orthodontic Treatment Need (IOTN). Methods A cross-sectional study was conducted on a representative random sample (N = 248) of adolescents aged 12 years. The DAI and both components of IOTN were used to evaluate malocclusion. The association between the Dental Health Component of the IOTN with gender and ethnic group were analyzed by chi-square test. The concordances between the indexes were analyzed by the kappa statistic, with 95% confidence intervals (CIs). Results The prevalence of adolescents with high severity and orthodontic treatment need was 10.5% (95% CI, 6.7-14.3), 36.5% (95% CI, 32.3-44.3), and 73.4% (95% CI, 67.9-78.9) for the Aesthetic Component of the IOTN, Dental Health Component of the IOTN, and DAI, respectively. The indexes showed high agreement for the cases with low treatment need, whereas low concordance was observed for the cases with high treatment need. Conclusions The perception of orthodontic treatment need was assessed differently using DAI and IOTN.

Objective: The aim of this study was to associate the presence of oral habits with anxiety and malocclusion.Methods: Cross-sectional observational study with 199 schoolchildren 6–14 years old. Malo...

To investigate the association between temporomandibular disorder (TMD) symptoms and women's oral health-related quality of life (OHRQoL).Of the women, 86.9% in the case group, and 69.6% in the control group presented some TMD symptoms (Women with a negative impact on OHRQoL are more likely to report TMD symptoms.

Summary Objective To establish a simplified method for measuring the edge bevel radius of 0.019 × 0.025-in steel rectangular orthodontic wires, achievable in the clinical environment, and to compare it with the photographic method. Materials and methods Aided by the AutoCAD™ 2016 software, the theoretical mathematical relationship was determined between the edge rounding radius and cross-sectional dimensions (height, width, diagonals), through rectangle drawings that represent cross-sections. Two hundred segments (n = 20) were obtained from the posterior portions of 100 archwires from 10 brands (Dentaurum™; American-Orthodontics™; GAC™; 3M-Unitek™; Abzil™; Morelli™; Orthometric™; Aditek™; A-Company™; Orthomundi™). The cross-sectional measures of each segment were obtained with a micrometer and a caliper, and the edge bevel radii of these segments were calculated with the use of a mathematical formula. For the “gold standard”, the segments were included longitudinally in a phenolic resin cylinder, cross-sectioned, polished, and photographed in scanning electron microscope (SEM). The images were amplified 770× and the radii were measured with an acetate template. The micrometer and caliper measuring methods were subjected to Bland-Altman analysis and compared with the gold standard (SEM), considering ±10 μm as the maximum acceptable difference between methods. Results In the micrometre measurement, 95% of the differences from the standard were within the limits of agreement (−7.21 and 5.56 μm). For the caliper method, 95% of the differences were between −5.46 and 19.83 μm, which exceeded the fixed limit ±10 μm. Conclusion The calculation method with micrometre measurements is equivalent to the photographic method, but there is no such equivalence for the caliper measurements.

Introduction The sterilization and disinfection procedures should be adapted to the chemical profile of the metal alloys present in the instruments. Objective This study aimed to perform a micrographic assessment on the surface characteristics of the widia of orthodontic pliers with two alloy compositions subjected to the action of 0.2% peracetic acid and intensive use. Material and method Twenty distal cutting pliers were divided into two groups (n=10) according to widia composition (%wt): W1- 85% to 87% of tungsten carbide (TC) and other components in the proportion of 13% to 15% and W2 – 87.5% to 88.5% of tungsten carbide and 11.5% to 12.5% for other components. All the pliers were assessed in a stereoscopic magnifying glass (32x) after three treatments: before use (T0); after cutting 100 segments of rectangular stainless-steel wires – intensive use (T1); and after 100 sterilization cycles in 0.2% peracetic acid and intensive use (T2). The cutting sites of all pliers were standardized. Widia regions were defined by line “A” representing T1 and line “B” representing T2. A frequency distribution table and Fisher’s exact test (α=0.05) was performed. We assessed two widia from each composition and treatment in SEM and energy-dispersive X-ray spectroscopy (EDS/SEM). Result The results showed that W1 pliers presented significantly fewer defects after the sterilization cycles with peracetic acid and intensive use than W2 pliers (p=0.0198). There were no differences between both pliers after intensive use (p=1.000). Conclusion The SEM images and EDS analyses showed changes in widia surfaces after the different treatments. Widia composition affected the resistance of the orthodontic pliers after sterilization cycles with 0.2% peracetic acid and intensive use. Resumo Introdução Os procedimentos de esterilização e desinfecção devem ser adaptados ao perfil químico das ligas metálicas presentes nos instrumentos. Objetivo O objetivo do estudo foi realizar uma avaliação micrográfica das características da superfície da widia de alicates ortodônticos com duas composições de ligas submetidas à ação de ácido peracético a 0,2% e uso intensivo. Material e método Vinte alicates de corte distal foram divididos em dois grupos (n=10), de acordo com a composição widia (% em peso): W1- 85% a 87% de carboneto de tungstênio e outros componentes na proporção de 13% a 15% e W2 - 87,5% a 88,5% de carboneto de tungstênio e 11,5% a 12,5% para outros componentes. Os alicates foram avaliados em uma lupa estereoscópica (32x) após três tratamentos: antes do uso (T0); após corte de 100 segmentos de fios retangulares de aço inoxidável- uso intensivo (T1); após 100 ciclos de esterilização em ácido peracético a 0,2% e uso intensivo (T2). Os locais de corte dos alicates foram definidos pela linha “A” representando T1 e pela linha “B” representando T2. Foi realizada uma tabela de distribuição de frequências e o teste exato de Fisher (α=0,05). As widias foram avaliadas em MEV e Espectroscopia de Energia Dispersiva. Resultado Os alicates W1 apresentaram defeitos significativamente menores após os ciclos de esterilização com ácido peracético e uso intensivo do que os alicates W2 (p=0,0198). Não houve diferenças entre os dois alicates após uso intensivo (p=1.000). Conclusão As imagens de MEV/EDS mostraram alterações nas superfícies widia após os diferentes tratamentos. A composição widia afetou a resistência do alicate ortodôntico após ciclos de esterilização com ácido peracético a 0,2% e uso intensivo.

Objective: This study aimed at evaluating whether changes in the insertion angle is a determining factor in the positioning of the miniscrews body in a region with larger interradicular space in the posterior maxilla. Methods: Analysis of 60 posterior maxillary quadrants were made using images obtained by means of cone-beam computed tomographic image (CBCT), with 0.076-mm voxel, which presented a real miniscrew inserted in the mesial region of the maxillary first molars, serving as reference point for the placement of the virtual miniscrews. Measurements of the distances between roots were made in three points on the body of the virtual miniscrews (A, B and C), at four different angulations, 70o, 60o, 50o and 40o (T1 to T4), in relation to the long axis of the second premolar. This evaluation was made in four groups, selected in accordance with the disposition of the roots of the second premolars and first molars: Group 1 (all types of roots), Group 2 (convergent roots), Group 3 (divergent roots) and Group 4 (parallel roots). Results: There were no statistically significant differences in the measurements of points A, B and C, at the different angles (70o, 60o, 50o and 40o) and in the different groups (p > 0.05). Conclusions: Changes in the insertion angle is not a determinant factor in the positioning of miniscrews body in regions with larger interradicular space in posterior maxilla. RESUMO Objetivo: o presente estudo objetivou avaliar se alterações no ângulo de inserção do miniparafuso são um fator decisivo para a adaptação do corpo do parafuso em áreas com espaço inter-radicular aumentado, na região posterior da maxila. Métodos: foram realizadas análises em 60 quadrantes maxilares posteriores, a partir de imagens obtidas por tomografia computadorizada de feixe cônico (TCFC), com voxel de 0,076 mm, as quais apresentavam um miniparafuso real inserido na região mesial dos primeiros molares superiores, utilizado como ponto de referência para a inserção de miniparafusos virtuais. As distâncias inter-radiculares foram mensuradas utilizando-se três pontos marcados no corpo dos miniparafusos virtuais (A, B e C), inseridos com quatro angulações diferentes (70°, 60°, 50° e 40°) (T1 a T4) em relação ao longo eixo do segundo pré-molar. A avaliação foi realizada em quatro grupos, selecionados de acordo com a disposição das raízes dos segundos pré-molares e primeiros molares: Grupo 1 - contendo todos os tipos de raízes; Grupo 2 - raízes convergentes; Grupo 3 - raízes divergentes; e Grupo 4 - raízes paralelas. Resultados: não houve diferença estatisticamente significativa entre as medidas dos pontos A, B e C nas diferentes angulações (70°, 60°, 50° e 40°) ou entre os grupos (p > 0,05). Conclusões: alterações no ângulo de inserção dos miniparafusos não são um fator decisivo para a adaptação do corpo do parafuso, em áreas com espaço inter-radicular aumentado entre primeiro molar e segundo pré-molar superiores.

Objective: To evaluate the shear bond strength of lingual orthodontic brackets with resin or metal pads, the location of bond failure and the adhesive remnant index (ARI). Methods: A total of 40 extracted upper premolars were randomly divided into two groups of 20 each: bonding with brackets having (1) pads with extended resin directly on the lingual surface of teeth, and (2) pads with metal custom base on the lingual surface of teeth. The debonding force was measured with an Instron universal testing machine. A Student’s t-test was used to assess the difference between groups (α = 0.05). Results: The results showed a significant difference between the groups (p < 0.001). The shear bond strength of metal pads was significantly higher than resin pads. Conclusions: Within the limitations of this in vitro study, it was concluded that the bond strength of lingual brackets with metal pads was higher than that of brackets with composite resin pads, due to the metal part being a single unit and welded. The failure location in the region between the bracket and the resin pad affected a higher percentage of the resin pads than the metal pads. RESUMO Objetivo: avaliar a resistência de união ao cisalhamento de braquetes ortodônticos linguais com pads em resina e metálicos, assim como os locais de ocorrência das falhas, além do Índice de Adesivo Remanescente (ARI). Métodos: 40 pré-molares superiores extraídos foram aleatoriamente divididos em dois grupos de 20 espécimes cada, para a colagem de braquetes com: 1) pads em resina, estendida diretamente na face lingual dos dentes; e 2) pads com base metálica customizada, na face lingual dos dentes. A força de descolagem dos braquetes foi mensurada por meio de uma máquina de ensaio universal (Instron). O teste t de Student foi utilizado para avaliar diferenças intergrupos (α = 0,05). Resultados: os resultados demonstram haver diferença significativa intergrupos (p < 0,001). A resistência de união ao cisalhamento dos pads metálicos foi significativamente maior em comparação aos pads em resina. Conclusões: dentro das limitações desse estudo in vitro, foi possível concluir que a resistência de união de braquetes linguais com pads metálicos foi superior à resistência de braquetes com pads em resina composta, uma vez que os pads metálicos customizados e os braquetes são fundidos, formando uma única unidade. A porcentagem de falhas de colagem na região entre o braquete e o pad foi maior para os pads em resina, em comparação aos pads metálicos.

The aim of this study was to evaluate the effect of different number of thermal cycles on the shear bond strength (SBS) of metallic orthodontic brackets bonded to feldspathic ceramic by a composite resin. Twenty-five ceramic cylinders were etched with 10% hydrofluoric acid for 60 s and received two layers of silane. Brackets were bonded to the cylinders using Transbond XT and assigned to 5 groups (n=5): Group 1 - Control group (without thermal cycling); Group 2 - 500 thermal cycles; Group 3 - 5,000 thermal cycles; Group 4 - 7,000 thermal cycles and Group 5 - 10,000 thermal cycles. Light-activation was carried out by Radii Plus LED. SBS testing was carried out after 24 h of storage in deionized water and thermal cycling (5/55 oC and 30 s dwell time). Five brackets were bonded to each cylinder, totalizing 25 brackets for each group. Data were submitted to one-way ANOVA and Tukey’s test (α=0.05). The Adhesive Remnant Index (ARI) was evaluated at 8× magnification. The SBS (MPa) of control group (9.3±0.8), 500 (9.0±0.7) and 5,000 (8.4±0.9) thermal cycles were significantly higher than those after 7,000 (6.8±0.6) and 10,000 (4.9±1.0) thermal cycles (p

This study to evaluate the effects of different hydrofluoric acid (HF) concentrations and thermal cycling on the shear bond strength (SBS) of brackets to ceramic. Cylinders of ceramic were divided into 10 groups (n=15), according to HF concentrations: 1-1%;2-2.5%;3-5%;4-7.5%;5-10% (storage 24 h); 6-1%;7-2.5%;8-5%;9-7.5%; and, 10-10% (thermal cycling). All cylinders were etched for 60s and received one layer of silane. Metallic brackets were bonded to the cylinders using Transbond-XT, light activated for 40 s, using a LED (Radii Plus) and stored in deionized water at 37o C for 24h. The groups 6 to 10 were submitted to thermal cycling (7,000 cycles - 5o/55oC). SBS was performed in an Instron at crosshead speed of 1.0 mm/min. Data were submitted to two-way ANOVA and Tukey’s post-hoc test (α=0.05). The Adhesive Remaining Index (ARI) was evaluated at 40x magnification. The different HF acid concentrations influenced on the SBS of the brackets to ceramic (p

Aim: To evaluate orthodontists’ knowledge and clinical practices regarding the treatment of patients with HIV/AIDS. Methods: Cross-sectional study performed with 655 Brazilian orthodontists based on a previously calculated sample size. Self-administered questionnaires were sent to orthodontists to collect information on knowledge and clinical conduct regarding the care of patients with HIV/AIDS. The study evaluated the awareness of possible risk factors for contamination, oral manifestations of HIV, need for more information on the care of HIV-positive patients, whether orthodontic treatment is indicated in HIV-positive patients, and whether they had knowingly performed orthodontic treatment in HIV-positive patients. Simple regression models were adjusted, and crude Odds Ratios estimated the associations with 95% confidence intervals. The variables with P < 0.20 in the crude analysis were tested in multiple logistic regression models, and those with P ≤ 0.05 were maintained in the final model. Magnitudes were estimated by adjusted Odds Ratios values, with 95% confidence intervals. Results: Orthodontists who were aware of the oral manifestations of HIV/AIDS, those having work experience of more than 20 years, and those who believed that orthodontic treatment could be indicated for these patients were 3.30 (1.79-6.10), 2.74 (1.36-5.52) and 1.92 (1.13-3.24) times more likely to perform orthodontic treatment in HIV-positive patients, respectively. Most orthodontists (92.9%) reported they needed to obtain more information about orthodontic care in patients with HIV/AIDS. Conclusion: Although orthodontists reported feeling able and qualified to provide dental care to patients with HIV/AIDS, gaps in their knowledge need to be addressed with further training.

Objectives: The aim of this study was to investigate the association between symptoms of temporomandibular disorders (TMD), quality of life, and malocclusion.Methods: A cross-sectional observational design study was utilized among 248 schoolchildren aged 12 years old. Symptoms of TMD were assessed using the Orofacial Pain and Temporomandibular Disorders Triage Questionnaire, and subjects were further evaluated as oral-health-related quality of life (CPQ11-14), tooth clenching/grinding and malocclusion (Dental Aesthetic Index). Chi-square for independence, Odds Ratio and Mann–Whitney test were used (p = 0.05) statistically.Results: Statistically, association was detected between TMD symptoms with pain and worse quality of life (p

Introduction The purpose of this study was to examine associations among malocclusion and the contextual factors of quality of life and socioeconomic status. Methods A cross-sectional study was conducted with a population-based sample of 1256 children from 7 to 10 years old. Malocclusion was assessed clinically; oral health–related quality of life (OHRQoL) was assessed using the Brazilian version of the child perceptions questionnaire; socioeconomic status was determined from data made available by the Research and Planning Institute of Piracicaba, Sao Paulo, Brazil. Initially, bivariate analyses were performed; after this, starting with variables with P ≤0.20, multilevel multiple logistic regression models were estimated, in which the binomial distribution, function of the logistic connection, and criteria for remaining in the model at P ≤0.05 were considered. Results Of the children, 82.1% had some type of malocclusion. Increased age associated with low socioeconomic status was the determinant for occlusal problems. The determination of low OHRQoL appears to be associated with the socioeconomic status in the individual factors, and increased overjet appears to be associated with factors at the contextual level. Conclusions Socioeconomic status and age are risk factors for malocclusion. Of the malocclusions evaluated, increased overjet had the most negative influence on the OHRQoL.

Aim: The objective of this study was to measure and compare the in vitro performance of active and passive self-ligating brackets in orthodontic rotation by means of an electromagnetic field simulation. Methods: The study sample consisted of 32 mandibular right central incisor brackets (n=8), slot 0.022", that were divided into the following groups: 1) BioQuick® (Forestadent, Pforzheim, Germany) active brackets; 2) In-Ovation®R (Dentsply-GAC, Central Islip, New York, USA) active brackets; 3) Damon-Q® (Ormco, Orange, California, USA) passive brackets, and 4) Smartclip® (3M, Monrovia, California, USA) passive brackets. The orthodontic wire used was CuNiTi round section 0.016", thermoactivated at 35o C (ORMCO-Orthodontics Glendora, California, USA). The experiment was performed in a simulator machine, composed of two fixed lateral axes and a movable central axis, which simulated the dental rotation. Qualitative analysis (n = 4) was performed using SEM. After the descriptive and exploratory analysis, the yield and grade data were submitted to one-way analysis of variance (ANOVA) followed by the Tukey test, considering the level of significance of 5%. Results: In-Ovation®R brackets showed significantly higher yield than BioQuick® and Damon-Q®. Damon-Q® brackets presented a significantly lower mean value than In-Ovation R and Smartclip®. BioQuick® did not differ significantly from Damon-Q® and Smartclip®. In-Ovation®R did not differ significantly from Smartclip®. Conclusion: In the present study, it was observed that there is a difference in rotational control in the different self-ligating brackets tested being the best rotational control was the In-Ovation R® group (active), followed in descending order by the groups Smartclip® (passive), Bioquick® (active) and Damon Q® (passive).

Objective This study was designed to evaluate the skeletal, dental and soft tissue effects of mandibular deficiency treatment with the mandibular protraction appliance (MPA) using 12 factors of the Ricketts analysis. Material and method This cross-sectional retrospective study sample consisted of a group (n = 27), with Class II malocclusion, convex facial profile, increased horizontal trespass and mandibular deficiency, with initial mean age of 12.27 and final of 15.18 years, treated with fixed appliance combined with the MPA, in an average time of 2.9 years. Initial and final radiographs were investigated using Ricketts analysis. The dependent t-test was used to compare the initial and final phases of the MPA group, with a significance level of 5%. Result Statistically significant differences were observed for dental changes such as retrusion (p=0.000) and palatal inclination of the maxillary incisors (p=0.000); protrusion (p=0.000) and buccal inclination of the mandibular incisors (p=0.000); increased interincisal angle (p=0.002) and improved molar ratio (p=0.003). There was also a restriction of the anterior displacement of the maxilla (p=0.000) and a decrease in the mandibular plane angle (p=0.024). The variable inferior labial protrusion with significance (p=0.000), reiterated the improvement in the profile. Conclusion The effects of MPA on correction of malocclusion Class II, verified by Ricketts analysis occurred predominantly by dentoalveolar changes, decrease in the Mandibular Plane Angle, and restriction of anterior displacement of the maxilla, which contributed to the improvement in the patient's profile. Resumo Objetivo Este estudo analisou as alterações dentárias, esqueléticas e tegumentares promovidas pelo Aparelho de Protração Mandibular (APM) por meio da análise de Ricketts. Material e método A amostra contou com 27 pacientes (14 meninas e 13 meninos) com má oclusão de Classe II, perfil facial convexo, trespasse horizontal aumentado e deficiência mandibular, com idade média inicial de 12,27 e final de 15,18 anos, tratados com aparelho fixo combinado com o APM. A comparação das telerradiografias iniciais (T1) e finais (T2) foi realizada pelo teste t dependente, com nível de significância de 5%. Resultado Observou-se diferença estatisticamente significante para a retrusão (p=0.000) e lingualização dos incisivos superiores (p=0.000), protrusão (p=0.000) e vestibularização dos incisivos inferiores (p=0.000), aumento do ângulo interincisivos (p=0.002), melhora da relação molar (p=0.003), restrição do deslocamento anterior da maxila (p=0.000), diminuição do ângulo do plano mandibular (p=0.024) e melhora do perfil facial (p=0.000). Conclusão O APM promoveu alterações dentoalveolares, observadas principalmente pela diminuição do ângulo do plano mandibular e restrição do deslocamento para anterior da maxila que contribuíram para a melhora do perfil do paciente.

Aim: The study evaluated, using histomorphometry, the percentage of hyaline area in periodontal ligament (PDL) and root resorption in orthodontic tooth movement (OTM). Methods: Ten rats were divided into two groups. G3 Group (n=5), with 3 days of OTM and G7 Group (n=5), with 7 days of OTM. A Control Group (n=5) consisted of contralateral teeth of each animal, which were not moved. Maxillary left first molar was moved, using stainless steel spring connected to the incisors with 40g force. Microscopic analysis was done in transversal sections of the mesiovestibular (MV) and distovestibular (DV) roots in the cervical level. Results: There was a PDL hyaline area in the DV root of 6.2% in G3 and 1.8% in G7. The root resorption area in G7 was 0.9%. On MV root and Control Group were not found occurrences of hyaline areas in PDL and no root resorption. Conclusions: Based on the results obtained, it might be concluded that smaller roots showed higher frequency of hyaline areas and root resorption.

Aim: This in vitro study investigated the effect of the application of an adhesive, silane and thermal cycling (TC) on the shear bond strength (SBS) of ceramic brackets to feldspathic ceramic. Methods: 16 cylinders of feldspathic ceramic were etched with hydrofluoric acid and divided into four groups (n=4): G1 - silane, without TC; G2 – silane, with TC; G3 - adhesive, without TC; G4 - adhesive, with TC. One layer of silane was applied on the surface of cylinders in G1 and G2 e one layer of photo-activated adhesive Single Bond Universal was used in G3 and G4. Ceramic brackets were bonded using Transbond XT. The SBS data were subjected to two-way ANOVA and Tukey’s post hoc test (α=0.05). The Adhesive Remnant Index (ARI) was evaluated at 40× magnification. Results: Silane was more effective than adhesive on the SBS of the brackets to ceramic (p

Objective To evaluate the difference in surface roughness of stainless steel archwires of different commercial brands used in lingual orthodontics. Materials and methods Precontoured arches measuring 0.016″ × 0.022″ were selected of the following brands: Tecnident, Adenta, G&H, Highland Metals Inc., Ormco, Incognito, and Ebraces. Quantitative evaluation of the surface roughness of archwires was performed by means of an atomic force microscope in contact mode. Three surface readouts were taken of each sample, analyzing areas of 20 × 20 μm. Each scan of the samples produced a readout of 512 lines, generating threedimensional images of the wires. The analysis of variance statistical test was applied to prove significant variables (p > 0.05), with H0 being rejected and H1 accepted. Results The Incognito brand showed the lowest surface roughness. The archwires of brands Adenta, Tecnident, Highland, and Ormco showed similar values among them, and all close to these obtained by the Incognito brand. The archwires of the Ebraces brand showed the highest surface roughness, with values being close to those of the G&H Brand. Conclusion There was a statistical difference in surface roughness of orthodontic archwires among the brands studied. Clinical significance Companies should pay attention to the quality control of their materials, as these may directly affect the quality of orthodontic treatment. How to cite this article Facchini FMM, Filho MV, Vedovello SAS, Cotrim FA, Cotrim-Ferreira A, Tubel CAM. Wire Roughness Assessment of 0.016″ × 0.022″ the Technique Lingual Orthodontics. J Contemp Dent Pract 2017;18(4):295-299.

Aim: to evaluate the synergic impact of muscular TMD and malocclusion on quality of life, masticatory capacity and emotional features of young adults. Methods: this cross-sectional study comprised 4 groups (n= 15): G1, individuals without TMD or malocclusion; G2, with TMD and malocclusion; G3, with TMD and without malocclusion, and G4, without TMD and with malocclusion. Muscular TMD was diagnosed by RCD/TMD. Data included quality of life (OHIP-14), masticatory capacity test (X50), emotional stress (PSS-14), depression (MDI), pain intensity and salivary cortisol. Comparative statistical analysis included One-way ANOVA and Tukey post hoc test (X50, stress and cortisol) and GENMOD followed by Wald test (OHIP-14 and pain data). Fisher's and Pearson's association analysis were carried out. Results: Comorbidity of muscular TMD and malocclusion leads to significant lower masticatory capacity (p

Introduction In this study, we aimed to assess the relationship between normative and perceived orthodontic treatment need associated with quality of life, self-esteem, and self-perception. Methods The sample included 248 schoolchildren aged 12 years. The normative aspect of orthodontic treatment was assessed by the Dental Health Component and the Aesthetic Component of the Index of Orthodontic Treatment Need. The subjects were further evaluated for their oral health-related quality of life, self-esteem, and self-perception of oral esthetics. The Aesthetic Component of the Index of Orthodontic Treatment Need was considered as the response variable, and generalized linear models estimated by the GENMOD procedure (release 9.3, 2010; SAS Institute, Cary, NC). Model 1 was estimated with only the intercept, providing the basis for evaluating the reduction in variance in the other models studied; then the variables were tested sequentially, considering P ≤0.05 as the criterion for remaining in the model. Results In the model, self-perception and self-esteem were statistically significant in relation to the perceived need for treatment. The normative need was significantly associated with the outcome variable and was not influenced by independent variables. Conclusions The normative need for orthodontics treatment was not overestimated by the perceived need, and the perceived need was not influenced by sex and the impact on quality of life.

Aim: To evaluate signs and symptoms of temporomandibular joint disorder and satisfaction in patients before and after orthognathic surgery. Methods: The sample consisted of 15 patients aged between 19 and 47 years old, indicated for orthodontic-surgical treatment. All patients answered na anamnesis questionnaire based on Helkimo Anamnestic Index to evaluate subjective symptoms and underwent a clinical evaluation based on Helkimo Disfunction Index, applied at three time points: before (T0), three (T1) and six months (T2) after surgery. Statistical models used were χ2 test (Chi-square), Tukey test, confidence interval and analysis of variance (ANOVA). Results: Statistical analysis revealed no significant difference in the incidence of joint sounds, maximum mouth opening, deviation of mouth opening and pain in the TMJ region (p>0.05). No patient presented worsening of the symptomatology. As regards muscular pain, there was a statistically significant improvement with time (p