Search

Beyond Fifth Generation (B5G) networks are expected to be the most efficient cellular wireless networks with greater capacity, lower latency, and higher speed than the current networks. Key enabling technologies, such as millimeter-wave (mm-wave), beamforming, Massive Multiple-Input Multiple-Output (M-MIMO), Device-to-Device (D2D), Relay Node (RN), and Heterogeneous Networks (HetNets) are essential to enable the new network to keep growing. In the forthcoming wireless networks with massive random deployment, frequency re-use strategies and multiple low power nodes, severe interference issues will impact the system. Consequently, interference management represents the main challenge for future wireless networks, commonly referred to as B5G. This paper provides an overview of the interference issues relating to the B5G networks from the perspective of HetNets, D2D, Ultra-Dense Networks (UDNs), and Unmanned Aerial Vehicles (UAVs). Furthermore, the existing interference mitigation techniques are discussed by reviewing the latest relevant studies with a focus on their methods, advantages, limitations, and future directions. Moreover, the open issues and future directions to reduce the effects of interference are also presented. The findings of this work can act as a guide to better understand the current and developing methodologies to mitigate the interference issues in B5G networks. [ABSTRACT FROM AUTHOR]

Device-to-Device (D2D) communication is one of the enabling technologies for 5G networks that support proximity-based service (ProSe) for wireless network communications. This paper proposes a power control algorithm based on the Nash equilibrium and game theory to eliminate the interference between the cellular user device and D2D links. This leads to reliable connectivity with minimal power consumption in wireless communication. The power control in D2D is modeled as a non-cooperative game. Each device is allowed to independently select and transmit its power to maximize (or minimize) user utility. The aim is to guide user devices to converge with the Nash equilibrium by establishing connectivity with network resources. The proposed algorithm with pricing factors is used for power consumption and reduces overall interference of D2Ds communication. The proposed algorithm is evaluated in terms of the energy efficiency of the average power consumption, the number of D2D communication, and the number of iterations. Besides, the algorithm has a relatively fast convergence with the Nash Equilibrium rate. It guarantees that the user devices can achieve their required Quality of Service (QoS) by adjusting the residual cost coefficient and residual energy factor. Simulation results show that the power control shows a significant reduction in power consumption that has been achieved by approximately 20% compared with algorithms in [11]. [ABSTRACT FROM AUTHOR]

Routing is fundamental in any wireless network for path selection, which provides the most effective way that legitimizes the data to be transmitted from a source to a destination device. In gigantic network demand nowadays, routing is pertinent to ensure fast and reliable data transfer. Ineffective routing may cause route flapping and degrade the overall Quality of Service (QoS). Meanwhile, Device-to-Device communications (D2D) is a technology that allows the devices to be connected without or partial involvement of the conventional cellular network. With these natures of qualities, D2D communication provides a reliable propitious medium that caters for the needs of many different telecommunications scenarios. The interconnectivity of multiple devices creates the Internet of Things (IoT), which will be an essential insistent in future technologies. With the dynamic nature of D2D technology, the routing approach act as a principal architecture that essential to be implemented in every niche D2D aspect. If wrong routing decisions are made in D2D communication, the QoS performance would be worse than the conventional cellular network. This paper present the state of the art of fundamentals, recent progress, current challenges, future directions, and potential routing applications for D2D and Beyond IoT 5G Networks. This review will also act as a guide and reference for future researchers and scientists to explore and integrate the routing technique in D2D communication and Beyond IoT 5G Networks. [ABSTRACT FROM AUTHOR]

The much-awaited year—2021 that promises to deliver a great deal on the 5th generation (5G) wireless systems' expectations is finally here. Several solutions have been proposed to deal with the energy challenges in the evolving wireless systems, especially in 5G and beyond. These solutions have considered among other approaches, design of new network architecture based on the employment of new radio access techniques called cloud radio access networks (C-RAN), the use of heterogeneous networks approaches, the introduction of renewable energy (RE) as an alternative source of power, etc. Nonetheless, this paper's focus is ultimately on the approaches to achieve optimal energy-efficient (EE) in 5G and beyond networks based on an emerging design philosophy that promises higher overall system capacity at a low energy cost. It focuses on four key EE solutions for future wireless systems: EE resource allocation, network planning, RE, and C-RAN. It discusses various related work, research challenges and possible future work for these four areas. Moreover, the advantages and limitation of new proposed 5G and beyond RON architecture are also reviewed. It is expected that the readers of this study will understand different EE solutions to achieve an optimal EE network. [ABSTRACT FROM AUTHOR]

With the increase in the number of communication devices, the requirement for higher bandwidth is essential. To achieve this goal, research and industrial communities have both suggested that future wireless systems will take advantage of the numerous emerging technologies. Utilization of Cognitive Radio (CR) for the next-generation Fifth Generation (5G) communication technology is the major advancement for getting a higher bandwidth in a cellular communication network. In this paper, we present a comprehensive study of CR from the perspectives of spectrum allocation schemes, impact and role of MAC layer in spectrum sensing and sharing, CR application in multi-hop wireless networks, and challenges associated with channel selection and packet routing in multi-hop heterogeneous CR networks. This paper also presents the analysis, in literature, of a range of intelligent routing protocols that are considered viable for packets routing in CR networks. The need to address the issue of spectrum depletion and the apparent underutilization of available scarce spectrum resources in existing wireless networks is the primary motivation behind this study. Considering the fact that CR technology can potentially maximize the utilization of bulk of the unused communication spectrum bands for the future 5G of wireless network and beyond. [ABSTRACT FROM AUTHOR]

Non-orthogonal multiple access (NOMA) scheme is emerging as a favourable multiple access scheme for future 5G networks. Compared to orthogonal multiple access techniques, NOMA provides spectral efficiency, user fairness, better connectivity, enhanced data rate and reduced latency. Thus, NOMA can be a suitable multiple access technique for 5G networks. On the other hand, in wireless networks, cooperation is a well-recognized proven technique for performance enhancement. Cooperative networks offer multiple desirable advantages, including high performance, reliability and greater coverage area. It is believed that in future 5G systems, many existing wireless technologies will be combined with new technologies. Power domain-NOMA (PD-NOMA) has features that can provide opportunities of improved performance and better spectral utilization for downlink cooperative networks. Recently, research works of incorporating PD-NOMA in cooperative networks have gained attention of researchers around the globe. This article surveys the recent research trends in PD-NOMA based cooperative network by reviewing related recent research on performance analysis of cooperative PD-NOMA systems, resources allocation, and impact of relay selection. Additionally, this review article discusses the performance of cooperative PD-NOMA networks when they are integrated with other 5G technologies including cognitive radio, full duplex radio and wireless energy harvesting. Furthermore, some unaddressed issues are highlighted for future research in this area. [ABSTRACT FROM AUTHOR]

The future wireless Fifth Generation (5G) communication network required a higher bandwidth in order to achieve greater data rate. It will be largely characterized by small cell deployments, typically in the range of 200 meters of radius/cell, at most. The implementation of small size networks delivers various advantages such as high data rate and low signal delay. However, it also suffers from various issues such as inter-cell, intra-cell, and inter-user interferences. This paper discusses the issues related to interference management for 5G network from the perspective of Heterogeneous Network and Device-to-Device communication, by using enabling techniques, such as Inter-cell Interference Coordination, Coordinated Multipoint, and Coordinated Scheduling. Furthermore, several pertinent issues have been critically reviewed focusing on their methodologies, advantages and limitations along with the future work. Future directions proposed by the 3rd Generation Partnership Project for interference mitigation has also been outlined. This review will act as a guide for the researchers to comprehend various existing and emerging enabling interference mitigation techniques for further exploration and smooth implementation of 5G wireless network. [ABSTRACT FROM AUTHOR]

With the rapid development of future wireless networks, device-to-device (D2D) technology is widely used as the communication system in the Internet of Things (IoT) fifth generation (5G) network. The IoT 5G network based on D2D communication technology provides pervasive intelligent applications. However, to realize this reliable technology, several issues need to be critically addressed. Firstly, the device's energy is constrained during its vital operations due to limited battery power; thereby, the connectivity will suffer from link failures when the device's energy is exhausted. Similarly, the device's mobility alters the network topology in an arbitrary manner, which affects the stability of established routes. Meanwhile, traffic congestion occurs in the network due to the backlog packet in the queue of devices. This paper presents a Mobility, Battery, and Queue length Multipath-Aware (MBMQA) routing scheme for the IoT 5G network based on D2D communication to cope with these key challenges. The back-pressure algorithm strategy is employed to divert packet flow and illuminate the device selection's estimated value. Furthermore, a Multiple-Attributes Route Selection (MARS) metric is applied for the optimal route selection with load balancing in the D2D-based IoT 5G network. Overall, the obtained simulation results demonstrate that the proposed MBMQA routing scheme significantly improves the network performance and quality of service (QoS) as compared with the other existing routing schemes. [ABSTRACT FROM AUTHOR]

Fog computing is considered a promising technology to reduce latency and network congestion. Meanwhile, Millimeter-wave (mmWave) communication owing to its potential for multi-gigabit of wireless channel capacity could be employed to further improve the performance of fog computing networks. In this context, we study the feasibility of using 28 GHz and 38 GHz mmWaves in fog radio access networks (F-RANs). The multi-slope path loss model is used to calculate the interference impacts because it provides a more accurate approximation of the wireless links. Simulations are carried out for uplink scenario considering the following fog node (FN) deployment models: Poisson point process (PPP), Ginibre point process (GPP), square grid, and ultra-dense network (UDN). The results depict that at low FN densities the massive accumulation of interference components severely impacts the performance. However, the performance can be improved by increasing the FN density and choosing a deployment strategy with high degree of regularity. Based on the results, we verify that it is feasible to use 28 GHz and 38 GHz mmWaves in F-RANs when the density of the interfering users is less than 150 user/km 2 where capacities higher than 1 Gbps are achieved for all considered scenarios. [Display omitted] [ABSTRACT FROM AUTHOR]

Coping with the skyrocketing needs for massive amounts of data for the future Fifth Generation (5G) network, Device-to-Device (D2D) communications technology will provide seamless connectivity, high data rates, extended network coverage, and spectral efficiency. The D2D communications are a prevalent emerging technology to achieve the vision of symmetry in the Internet of Things (IoT) services. However, energy resource constraints, network stability, traffic congestion, and link failure of the devices are the crucial impediments to establish an optimal route in the D2D communications based IoT 5G network. These obstacles induced packet drop, rapid energy depletion, higher end-to-end delay, and unfairness across the network, leading to significant route and network performance degradation. Therefore, in this paper, an energy, mobility, queue length, and link quality-aware routing (EMBLR) approach is proposed to overcome the challenges and boost network performance. Moreover, a multicriteria decision making (MCDM) technique is utilized for the selection of the intermediate device in an optimal route. Extensive simulation has been conducted and proven that the proposed routing approach significantly enhances network performance. Overall, results have been carried out in Quality of Service (QoS) performance metrics and compared with other well-known routing approaches. [ABSTRACT FROM AUTHOR]

Millimeter wave technology will be dominating the fifth-generation networks due to the clear advantage of higher frequency bands and hence wider spectrum. In this paper, the indoor radio wave propagation at 28 GHz is studied by developing an efficient three-dimensional ray tracing (ETRT) method. The simulation software based on the ETRT model has been verified by measurement data. The received signal strength indication and path loss have shown significant agreement between simulation and measurement. Compared with the conventional shooting bouncing ray tracing method, the proposed ETRT method has better agreement with measurement data. [ABSTRACT FROM AUTHOR]

It has been widely speculated that the performance of the next generation based wireless network should meet a transmission speed on the order of 1000 times more than the current cellular communication systems. The frequency bands above 6 GHz have received significant attention lately as a prospective band for next generation 5G systems. The propagation characteristics for 5G networks need to be fully understood for the 5G system design. This paper presents the channel propagation characteristics for a 5G system in line of sight (LOS) and non-LOS (NLOS) scenarios. The diffraction loss (DL) and frequency drop (FD) are investigated based on collected measurement data. Indoor measurement results obtained using a high-resolution channel sounder equipped with directional horn antennas at 3.5 GHz and 28 GHz as a comparative study of the two bands below and above 6 GHz. The parameters for path loss using different path loss models of single and multi-frequencies have been estimated. The excess delay, root mean square (RMS) delay spread and the power delay profile of received paths are analyzed. The results of the path loss models show that the path loss exponent (PLE) in this indoor environment is less than the free space path loss exponent for LOS scenario at both frequencies. Moreover, the PLE is not frequency dependent. The 3GPP path loss models for single and multi-frequency in LOS scenarios have good performance in terms of PLE that is as reliable as the physically-based models. Based on the proposed models, the diffraction loss at 28 GHz is approximately twice the diffraction loss at 3.5 GHz. The findings of the power delay profile and RMS delay spread indicate that these parameters are comparable for frequency bands below and above 6 GHz. [ABSTRACT FROM AUTHOR]