Search

Orthogonal frequency-division multiplexing (OFDM) has been selected as a baseline waveform for long-term evolution (LTE) and fifth-generation new radio (5G NR). Fast-convolution (FC)-based frequency-domain signal processing has been recently considered as an effective tool for transmitter and receiver side subband filtering of OFDM-based waveforms. However, for the original continuous FC-based model, the filtering can, in general, be configured in time-direction only with the granularity of half subframe, corresponding to 7, 14, or 28 symbols with 15kHz, 30kHz, or 60kHz subcarrier spacing, respectively. In this paper, we present a symbol-synchronous FC-processing scheme flexibly allowing filter re-configuration with the time resolution equal to one OFDM symbol while supporting tight carrier-wise filtering for 5G NR in mixed-numerology scenarios with adjustable subcarrier spacings, center frequencies, and subband bandwidths, as well as providing co-existence with LTE. Proposed approach segments each stream of time-domain OFDM symbols into overlapping processing blocks of fixed size. Symbol synchronous processing is achieved by dynamically adjusting the overlap between the processing blocks while aligning the payload part of the processing blocks with the boundaries of the OFDM symbols. The proposed scheme is demonstrated to support the envisioned use cases of 5G NR and provide a flexible starting point for sixth generation (6G) development. [ABSTRACT FROM AUTHOR]

This article presents two novel digital predistortion (DPD) based architectures that jointly mitigate the inphase/quadrature (IQ) modulator impairments and the power amplifier (PA) nonlinear distortion in wireless transmitters. The proposed architectures are multibit cartesian and complex delta-sigma modulator-based joint DPDs, called CDSM-JDPD and CXDSM-JDPD, respectively, which enable using low-cost digital-to-analog converters (DACs) while offering versatile linearization capabilities to combat the coexisting distortions of the PA and the IQ modulator. The proposed approach alleviates the need for reverse modeling and implementation of extra hardware to separately deal with frequency-dependent IQ impairments. Moreover, the CXDSM-JDPD enhances the linearization performance and relaxes the high oversampling ratio (OSR) requirement by quantizing the signal more efficiently. Furthermore, the presented concepts inherently support the use of low-resolution DACs, which offers a tremendous advantage in designing and implementing low-cost and energy-efficient radio transmitters. Extensive set of hardware-in-the-loop RF verification measurements with a commercial PA are provided, including two timely 5G New Radio (NR) scenarios at NR bands n3 and n78, while covering channel bandwidths up to 100 MHz and varying the OSR and the DAC bit resolution. The obtained results demonstrate the excellent linearization capabilities of the proposed solutions and their superiority compared to other DSM-based DPD approaches. [ABSTRACT FROM AUTHOR]

Orthogonal frequency-division multiplexing (OFDM) has been selected as the basis for the fifth-generation new radio (5G NR) waveform developments. However, effective signal processing tools are needed for enhancing the OFDM spectrum in various advanced transmission scenarios. In earlier work, we have shown that fast-convolution (FC) processing is a very flexible and efficient tool for filtered-OFDM signal generation and receiver-side subband filtering, e.g., for the mixed-numerology scenarios of the 5G NR. FC filtering approximates linear convolution through effective fast Fourier transform (FFT)-based circular convolutions using partly overlapping processing blocks. However, with the continuous overlap-and-save and overlap-and-add processing models with fixed block-size and fixed overlap, the FC-processing blocks cannot be aligned with all OFDM symbols of a transmission frame. Furthermore, 5G NR numerology does not allow to use transform lengths shorter than 128 because this would lead to non-integer cyclic prefix (CP) lengths. In this article, we present new FC-processing schemes which solve or avoid the mentioned limitations. These schemes are based on dynamically adjusting the overlap periods and extrapolating the CP samples, which make it possible to align the FC blocks with each OFDM symbol, even in case of variable CP lengths. This reduces complexity and latency, e.g., in mini-slot transmissions and, as an example, allows to use 16-point transforms in case of a 12-subcarrier-wide subband allocation, greatly reducing the implementation complexity. On the receiver side, the proposed scheme makes it possible to effectively combine cascaded inverse and forward FFT units in FC-filtered OFDM processing. Transform decomposition is used to simplify these computations, leading to significantly reduced implementation complexity in various transmission scenarios. A very extensive set of numerical results is also provided, in terms of the radio-link performance and associated processing complexity. [ABSTRACT FROM AUTHOR]

Highly directional millimeter-wave (mmW) connectivity – especially in industry-grade scenarios with complex and unpredictable device mobility – requires a certain degree of structural redundancy in the network, which can be provided by utilizing multi-connectivity mechanisms. To lower the coordination complexity and overhead of tracking multiple directional beams, mmW networks can retrieve and leverage timely positioning information. In this paper, we develop a holistic framework for the co-design of networking and positioning in industrial 5G mmW deployments with multi-connectivity capabilities. In particular, we propose a flexible two-stage positioning solution – mindful of information uncertainty – that relies upon the 5G NR system design and can be seamlessly integrated into the mmW cellular infrastructure with reasonable overheads. We reproduce a typical 5G mmW network deployment featuring dissimilar device mobility patterns and assess the performance of the proposed architecture. In particular, we evaluate the precision of our positioning and base station orientation estimation methods as well as analyze the impact of the proposed scheme on the system-level performance. Our numerical results demonstrate that the proposed solution yields highly accurate position estimates and significantly improves the average network spectral efficiency. [ABSTRACT FROM AUTHOR]

The deployment with beamforming-capable base stations in 5G New Radio (NR) requires an efficient mobility management system to reliably operate with minimum effort and interruption. In this work, we propose two artificial neural network models to optimize the cell-level and beam-level mobility management. Both models consist of convolutional, as well as dense, layer blocks. Based on current and past received power measurements, as well as positioning information, they choose the optimum serving cell and serving beam, respectively. The obtained results show that the proposed cell-level mobility model is able to sustain a strong serving cell and reduce the number of handovers by up to 94.4 % compared to the benchmark solution when the uncertainty (representing shadowing, interference, etc.) is introduced to the received signal strength measurements. The proposed beam-level mobility management model is able to proactively choose and sustain the strongest serving beam, even when high uncertainty is introduced to the measurements. [ABSTRACT FROM AUTHOR]