Search

The main goal of the Accelerator Test Facility 2 (ATF2) is to demonstrate the feasibility of future linear colliders’ final focus systems. The Ultra-low β^{*} optics of ATF2 is designed to have the same chromaticity level as CLIC. To ease the tuning procedure, a pair of octupoles was installed in ATF2 in 2017. This paper reports the optimizations performed to the octupoles’ setup for Ultra-low β^{*} optics including the new alignment technique, based on the waist shift and the new tunning knobs constructed for this optics. The full tuning procedure including the static errors is simulated for this setup., Proceedings of the 12th International Particle Accelerator Conference, IPAC2021, Campinas, SP, Brazil

The Compact Linear Collider (CLIC) could provide e⁺e⁻ collisions in two detectors simultaneously possibly at a repetition frequency twice the design value. In this paper, a novel dual Beam Delivery System (BDS) design is presented including optics designs and the evaluation of luminosity performance with synchrotron radiation (SR) and solenoid effects for both energy stages of CLIC, 380 GeV and 3 TeV. In order to develop the novel optics design, parameters such as the longitudinal and the transverse detector separations were optimized. The luminosity performance of the novel CLIC scheme was evaluated by comparing the different BDS designs for both energy stages of CLIC. The dual CLIC BDS design provides a good luminosity and proves to be a viable candidate for future linear collider projects., Proceedings of the 12th International Particle Accelerator Conference, IPAC2021, Campinas, SP, Brazil

CompactLight (XLS) is an International Collaboration of 24 partners and 5 third parties, funded by the European Union through the Horizon 2020 Research and Innovation Programme. The main goal of the project, which started in January 2018 with a duration of 36 months, is the design of an hard X-ray FEL facility beyond today’s state of the art, using the latest concepts for bright electron photo-injectors, high-gradient accelerating structures, and innovative short-period undulators. The specifications of the facility and the parameters of the future FEL are driven by the demands of potential users and the associated science cases. In this paper we will give an overview on the ongoing activities and the major results achieved until now., Proceedings of the 39th Free Electron Laser Conference, FEL2019, Hamburg, Germany

Field emitted electrons have important consequences in the operation of high-gradient RF accelerating structures both by generating so-called dark currents and initiating RF breakdown. The latter is an important limitation of the performance in such devices. Another kind of vacuum discharge that primarily affects the operation of lower-field RF components, for example those used in space applications, is multipactor. Theoretical simulations using CST Particle Studio, show that field emitted electrons generated in the high field regions of high-gradient accelerating cavities migrate to low field regions under ponderomotive forces potentially triggering multipactor there. This phenomenon is an interplay between high field and low field processes which may have as a consequence that multipactor actually affects to the performance of high-gradient cavities because field emitted electrons might reduce the timescales for the onset of multipactor., Proceedings of the 10th Int. Particle Accelerator Conf., IPAC2019, Melbourne, Australia

The FCC-ee is a high-luminosity, high-precision circular collider to be constructed in a new 100 km tunnel in the Geneva area. The physics case is well established and the FCC-ee operation is foreseen at 91 GeV (Z-pole), 160 GeV (W pair production threshold), 240 GeV (Higgs resonance) and 365 GeV (t-tbar threshold). Due to the large 6D production emittance and important thermal load in the production target, the positron injector, in particular the positron source, is one of the key elements of the FCC-ee, requiring special attention. To ensure high reliability of the positron source, conventional and hybrid targets are currently under study. The final choice of the positron target will be made based on the estimated performances. In this framework, we present a preliminary design of the FCC-ee positron source, with detailed simulation studies of positron production, capture and primary acceleration., Proceedings of the 10th Int. Particle Accelerator Conf., IPAC2019, Melbourne, Australia

Dark current is particularly relevant during operation in high-gradient linear accelerators. Resulting from the capture of field emitted electrons, dark current produces additional radiation that needs to be accounted for in experiments. In this paper, an analysis of dark current is presented for four accelerating structures that were tested and conditioned in CERN’s X-band test facility for CLIC. The dependence on power, and therefore on accelerating gradient, of the dark current signals is presented. The Fowler-Nordheim equation for field emission seems to be in accordance with the experimental data. Moreover, the analysis shows that the current intensity decreases as a function of time due to conditioning, but discrete jumps in the dark current signals are present, probably caused by breakdown events that change the emitters’ location and intensity., Proceedings of the 10th Int. Particle Accelerator Conf., IPAC2019, Melbourne, Australia

The Future Circular Collider (FCC-hh) is being designed as a 100 km ring that should collide 50 TeV proton beams. At 8.3 GJ, its stored beam energy will be a factor 28 higher than what has been achieved in the Large Hadron Collider, which has the highest stored beam energy among the colliders built so far. This puts unprecedented demands on the control of beam losses and collimation, since even a tiny beam loss risks quenching superconducting magnets. We present in this article the design of the FCC-hh collimation system and study the beam cleaning through simulations of tracking, energy deposition, and thermo-mechanical response. We investigate the collimation performance for design beam loss scenarios and potential bottlenecks are highlighted., Proceedings of the 10th Int. Particle Accelerator Conf., IPAC2019, Melbourne, Australia

H2020 CompactLight Project aims at designing the next generation of compact hard X-Rays Free-Electron Lasers, relying on very high accelerating gradients and on novel undulator concepts. CompactLight intends to design a compact Hard X-ray FEL facility based on very high-gradient acceleration in the X band of frequencies, on a very bright photo injector, and on short-period/superconductive undulators to enable smaller electron beam energy. If compared to existing facilities, the proposed facility will benefit from a lower electron beam energy, due to the enhanced undulators performance, be significantly more compact, as a consequence both of the lower energy and of the high-gradient X-band structures, have lower electrical power demand and a smaller footprint. CompactLight is a consortium of 24 institutes (21 European + 3 extra Europeans), gathering the world-leading experts both in the domains of X-band acceleration and undulator design., Proceedings of the 60th ICFA Advanced Beam Dynamics Workshop on Future Light Sources, FLS2018, Shanghai, China

The future circular hadron collider (FCC-hh) will have an unprecedented proton beam energy of 50 TeV, and total stored beam energy of 8.4 GJ. We discuss current developments in the collimation system design, and methods with which the challenges faced due to the high energies involved can be mitigated. Finally simulation results of new collimation system designs are presented., Proceedings of the 8th Int. Particle Accelerator Conf., IPAC2017, Copenhagen, Denmark

The international Future Circular Collider (FCC) study is designing hadron, lepton and lepton-hadron colliders based on a new 100 km tunnel in the Geneva region. The main focus and ultimate goal of the study are high-luminosity proton-proton collisions at a centre-of-mass energy of 100 TeV, using 16 T Nb3Sn dipole magnets. Specific FCC beam dynamics issues are related to the large circumference, the high brightness - made available by radiation damping -, the small geometric emittance, unprecedented collision energy and luminosity, the huge amount of energy stored in the beam, large synchrotron radiation power, plus the injection scenarios. In addition to the FCC-hh proper, also a High-Energy LHC (HE-LHC) is being explored, using the FCC-hh magnet technology in the existing LHC tunnel, which can yield a centre-of-mass energy around 25 TeV., Proceedings of the 57th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams, HB2016, Malmö, Sweden

The Accelerator Test Facility 2 (ATF2) at KEK is a prototype of the final focus system for the next generation of Future Linear Colliders(FCL). It aims to focus the beams to tens of nanometer transverse sizes and to provide stability at the few nm level. Achieving these goals requires modelling, measuring and suppressing of the transverse beam halo before the interaction point (IP). This paper presents a beam tail/halo generator based on realistic model and the investigation of vertical and horizontal beam tail/halo distribution at ATF2., Proceedings of the 7th Int. Particle Accelerator Conf., IPAC2016, Busan, Korea

Direct Higgs production in e⁺e⁻ collisions at the FCC is of interest if the centre-of-mass energy spread can be reduced by at least an order of magnitude. A mono-chromatization scheme, to accomplish this, can be realized with horizontal dispersion of opposite sign for the two colliding beams at the interaction point (IP). We review approaches from historical mono-chromatization studies, then derive a set of IP parameters which would provide the required performance in FCC e⁺e⁻ collisions at 63 GeV beam energy, compare these with the baseline optics parameters at neighbouring energies (45.6 and 80 GeV), comment on the effect of beamstrahlung, and, finally, discuss the modifications of the FCC-ee final-focus optics needed to obtain the required parameters., Proceedings of the 7th Int. Particle Accelerator Conf., IPAC2016, Busan, Korea

The proposed CERN FCC-hh proton-proton collider will operate at unprecedented per-particle (50 TeV) and total stored beam energies (8.4 GJ). These high energies create the requirement for an efficient collimation system in order to protect the accelerator components and experiments. In order to verify the performance of proposed collimation system designs, loss map simulations have been performed using the code Merlin. Results for the current baseline layout are presented for both betatron and off-momentum loss maps., Proceedings of the 7th Int. Particle Accelerator Conf., IPAC2016, Busan, Korea

In this deliverable we report an overview of the possible injector options suitable to match the CompactLight X-band high brightness linac able to drive short wavelength FELs user facilities. Different schemes have been investigated including RF gun injectors at different operating frequency (S, C and X band) and a DC gun based design. The electromagnetic and RF designs for all cases are reported and discussed, including a preliminary evaluation of the laser/cathode system requirements. Matchings with the downstream linac are also investigated with beam dynamics simulations. State of the art S-band injectors look appropriate to achieve the required parameters at low repetition rate ( 100 Hz). On the other end a compact C-band (or X-band) RF gun design is expected to have even better performances at low repetition rates and moreover, due to the lower thermal load, could allow higher repetition rates operation, up to 1 kHz, with acceptable performances degradation. DC guns are also very promising solutions for kHz range operation.

An S-Band High-Gradient (HG) Radio Frequency (RF) laboratory is under construction and commissioning at IFIC. The purpose of the laboratory is to perform investigations of high-gradient phenomena and to develop normal-conducting RF technology, with special focus on RF systems for hadron-therapy. The layout of the facility is derived from the scheme of the Xbox-3 test facility at CERN* and uses medium peak-power (7.5 MW) and high repetition rate (400 Hz) klystrons, whose RF output is combined to drive two testing slots to the required power. The design and construction of the various components of the system started in 2016 and has been completed. The installation and commissioning of the laboratory is progressing, with first results expected before mid 2018. The technical characteristics of the different elements of the system and the commissioning status together with preliminary results are described., Proceedings of the 9th Int. Particle Accelerator Conf., IPAC2018, Vancouver, BC, Canada

The International Linear Collider (ILC) is now under consideration as the next global project in particle physics. In this report, we review of all aspects of the ILC program: the physics motivation, the accelerator design, the run plan, the proposed detectors, the experimental measurements on the Higgs boson, the top quark, the couplings of the W and Z bosons, and searches for new particles. We review the important role that polarized beams play in the ILC program. The first stage of the ILC is planned to be a Higgs factory at 250 GeV in the centre of mass. Energy upgrades can naturally be implemented based on the concept of a linear collider. We discuss in detail the ILC program of Higgs boson measurements and the expected precision in the determination of Higgs couplings. We compare the ILC capabilities to those of the HL-LHC and to those of other proposed e+e- Higgs factories. We emphasize throughout that the readiness of the accelerator and the estimates of ILC performance are based on detailed simulations backed by extensive RandD and, for the accelerator technology, operational experience.

A large, world-wide community of physicists is working to realise an exceptional physics program of energy-frontier, electron-positron collisions with the International Linear Collider (ILC). This program will begin with a central focus on high-precision and model-independent measurements of the Higgs boson couplings. This method of searching for new physics beyond the Standard Model is orthogonal to and complements the LHC physics program. The ILC at 250 GeV will also search for direct new physics in exotic Higgs decays and in pair-production of weakly interacting particles. Polarised electron and positron beams add unique opportunities to the physics reach. The ILC can be upgraded to higher energy, enabling precision studies of the top quark and measurement of the top Yukawa coupling and the Higgs self-coupling. The key accelerator technology, superconducting radio-frequency cavities, has matured. Optimised collider and detector designs, and associated physics analyses, were presented in the ILC Technical Design Report, signed by 2400 scientists. There is a strong interest in Japan to host this international effort. A detailed review of the many aspects of the project is nearing a conclusion in Japan. Now the Japanese government is preparing for a decision on the next phase of international negotiations, that could lead to a project start within a few years. The potential timeline of the ILC project includes an initial phase of about 4 years to obtain international agreements, complete engineering design and prepare construction, and form the requisite international collaboration, followed by a construction phase of 9 years.

In this deliverable we report an overview of the possible injector options suitable to match the CompactLight X-band high brightness linac able to drive short wavelength FELs user facilities. Different schemes have been investigated including RF gun injectors at different operating frequency (S, C and X band) and a DC gun based design. The electromagnetic and RF designs for all cases are reported and discussed, including a preliminary evaluation of the laser/cathode system requirements. Matchings with the downstream linac are also investigated with beam dynamics simulations. State of the art S-band injectors look appropriate to achieve the required parameters at low repetition rate ( 100 Hz). On the other end a compact C-band (or X-band) RF gun design is expected to have even better performances at low repetition rates and moreover, due to the lower thermal load, could allow higher repetition rates operation, up to 1 kHz, with acceptable performances degradation. DC guns are also very promising solutions for kHz range operation., On behalf of the CompactLight Collaboration

The PRAE (Platform for Research and Applications with Electrons) accelerator is being built at Orsay campus with the main objective of creating a multidisciplinary R platform, involving subatomic physics, instrumentation, radiobiology and clinical research around a high-performance electron accelerator with beam energies up to 70 MeV (planned 140 MeV). In this paper we will report the optics design and beam dynamics simulations for the beam line dedicated to subatomic physics, more specifically for the measurement of the proton radius. This measurement requires extremely low energy spread (5×10−4) and small beam sizes with low divergence at three beam energies: 30, 50 and 70 MeV. The beam line includes a D-type chicane coupled to a dechirping passive structure, which generates inductive wakefields in order to get the performances required for such measurement., Proceedings of the 10th Int. Particle Accelerator Conf., IPAC2019, Melbourne, Australia

The International Linear Collider (ILC) being proposed in Japan is an electron-positron linear collider with an initial energy of 250 GeV. The ILC accelerator is based on the technology of superconducting radio-frequency cavities. This technology has reached a mature stage in the European XFEL project and is now widely used. The ILC will start by measuring the Higgs properties, providing high-precision and model-independent determinations of its parameters. The ILC at 250 GeV will also search for direct new physics in exotic Higgs decays and in pair-production of weakly interacting particles. The use of polarised electron and positron beams opens new capabilities and scenarios that add to the physics reach. The ILC can be upgraded to higher energy, enabling precision studies of the top quark and measurement of the top Yukawa coupling and the Higgs self-coupling. The international -- including European -- interest for the project is very strong. Europe has participated in the ILC project since its early conception and plays a major role in its present development covering most of its scientific and technological aspects: physics studies, accelerator and detectors. The potential for a wide participation of European groups and laboratories is thus high, including important opportunities for European industry. Following decades of technical development, R&D;, and design optimisation, the project is ready for construction and the European particle physics community, technological centers and industry are prepared to participate in this challenging endeavour.