Search

Heating, Ventilation and Air Conditioning (HVAC) unit is a major noise source in a vehicle’s interior space. Reducing this noise will improve the sound quality of the vehicle’s interior space and enhance passengers’ experience. However, current noise control techniques are high-cost and hazardous to environment. Therefore, this paper studies the first ever usage of low-cost, biodegradable natural materials for vehicle’s HVAC noise control. Jute felt and waste cotton were found to have higher sound absorption coefficients than other common sound absorbing natural materials, and were chosen as sound absorbers for noise control treatment of a prototype HVAC unit. Noise sources in the unit were identified and ranked, and the treatment was applied to these. The treatment significantly reduced the noise level (by 4 dBA) and loudness level (by 7 sones) due to the unit at the reference passenger’s ear location, with negligible cost and weight. Sound quality evaluation by 24 participants showed that the treatment significantly reduced the annoyance of the vehicle interior soundscape comprising the HVAC noise. Thus, jute felt and waste cotton are low-cost, light-weight, biodegradable and recyclable natural materials with high potential for HVAC noise control. [ABSTRACT FROM AUTHOR]

For modeling of jute as acoustic material, knowledge of its non-acoustical parameters like porosity, tortuosity, air flow resistivity, thermal and viscous characteristic lengths is a prime requisite. Measurement of these non-acoustical parameters is not straightforward and involves a dedicated measurement setup. So in order to overcome this issue, the inverse acoustical characterization can be used. In this paper, the particle swarm optimization method (PSO) is used as an optimization method. This method estimates the non-acoustical parameters of jute material in felt form by minimizing the error between experimental and theoretical sound absorption data. In this work, the impedance prediction models for fibrous materials like Johnson–Champoux–Allard model with rigid and limp frame and Garai–Pompoli model is used for sound absorption coefficient calculation by the transfer matrix method along with the PSO. The inverse estimated non-acoustical parameters for jute material are then compared with estimated and experimentally measured parameters for jute felts. Using these inversely predicted parameters, sound absorption of multilayer sound absorbers is also studied. [ABSTRACT FROM AUTHOR]

Abstract: This research aims to study the acoustical and flammability properties of biodegradable and easily disposable natural fibre jute and its composite for noise reduction in house hold appliances, automotive and architectural applications. Acoustical properties of jute fibre and felt (natural rubber latex jute composite) were measured in terms of normal specific sound absorption coefficient and sound transmission loss whereas fire retardant tests included limiting oxygen, flame propagation and smoke density test. The results illustrate that low density jute is a better sound absorber as compared to high density jute material, moreover natural rubber latex jute composite gives higher sound transmission class value than jute felt/cloth. Results were also compared with commercially available synthetic, non-biodegradable, glass fibre which indicates that the noise reduction coefficient value and sound transmission class rating of natural rubber latex jute felt are comparable to that of the popular fibre glass. Fire retardant tests show composite’s high limiting oxygen index value as compared to fibreboard and other natural sound absorbing material, wool, low smoke density rating and low light absorption with respect to fibre glass as well as self fire extinguishing ability. [ABSTRACT FROM AUTHOR]