Search

This article proposes a unified pulsewidth-cycle (UPWC) control strategy to achieve mixed-mode operation and consistent valley switching (VS) for boost power factor correction converter. Compared with conventional single-mode controllers, it has a unified scheme to achieve single discontinuous conduction mode (DCM), single critical conduction mode (CRM), or mixed DCM/CRM operations in each half-line cycle. To regulate the input current as a sinusoid, the UPWC controller adopts a variable pulsewidth and a near-constant switching cycle under DCM, while adopts a constant pulsewidth and a variable switching cycle under CRM. To facilitate analysis, normalized mapping of operation modes is provided, along with the final pulsewidth and switching cycle. Furthermore, to ensure consistent VS, a controlled zero current detection method is proposed to fix the turn-on point of the power switch. No matter in DCM or CRM, consistent VS reduces both the switching loss and current distortion caused by parasitic resonance. To further reduce the current distortion caused by fixing the turn-on point, a compensation gain is provided that reshapes the input current as a sinusoid. Finally, through mixed DCM/CRM operation and consistent VS, the proposed UPWC controller achieves preferable performances in the power range, efficiency, power factor, and current distortion. [ABSTRACT FROM AUTHOR]

This article investigates modeling and control approaches to optimize the efficiency and power factor for discontinuous conduction mode boost power factor correction converters. First, with detailed consideration of parasitics and GaN HEMT transients, the input and output charges of the converter are exactly derived, where the rate forms the comprehensive charge rate (CCR) model. Second, based on the CCR model, the overall efficiency is derived. Since the overall efficiency is only related to the input voltage, output voltage, and switching on-time, an optimal on-time is calculated to achieve the maximum efficiency. Furthermore, with the optimal on-time, a maximum efficiency average current (MEAC) controller is proposed to regulate the input current while maintaining the maximum efficiency. With the predefined optimal on-time, a switching cycle modulation method is adopted to regulate the input current as sinusoid, which improves the power factor to unity. Finally, effectiveness of the MEAC control strategy is verified by simulations and experiments. Compared with conventional constant on-time control, it achieves an optimized efficiency and power factor over a large operation range. [ABSTRACT FROM AUTHOR]

This article reveals parasitics-induced current distortion (PCD) effect in discontinuous conduction mode boost power factor (PF) correction (PFC) converter. With consideration of parasitics, accurate inductor current is derived through total differential functions of line voltage, output voltage and duty cycle. Furthermore, the proposed current model is used to analyze PFC converter under conventional sensorless average current mode (SACM) control, which is achieved by a variable duty cycle. It is found that parasitics have considerable influence to the input current, and PCD leads to a degraded PF. In order to solve this issue, a current reshaping strategy is proposed to reduce the PCD phenomenon. Based on the damped current equations, a compensation gain is derived to reshape the input current, which reduces the current damping and distortion caused by parasitics. Both the PCD phenomenon and the current reshaping strategy are verified by simulations and experiments. [ABSTRACT FROM AUTHOR]