Search

In recent years, the $H$ formulation of Maxwell's equations has become the de facto standard for simulating the time-dependent electromagnetic behavior of superconducting applications with commercial software. However, there are cases where other formulations are desirable, for example for modeling superconducting turns in electrical machines or situations where the superconductor is better described by the critical state than by a power-law resistivity. In order to accurately and efficiently handle these situations, here we consider two approaches based on the magnetic vector potential: the $T$ - $A$ formulation of Maxwell's equations (with power-law resistivity) and the implementation of a quasi critical state model (QCSM) with a steep $E$ - $J$ relationship limited at $J_{\rm c}$. In this article, we extend the $T$ - $A$ formulation to thick conductors so that large coils with different coupling scenarios between the turns can be considered. We also discuss the QCSM in terms of its ability to calculate ac losses: in particular, we investigate the dependence of the calculated ac losses on the frequency of the ac excitation and the possibility of using quick one-step (instead of full-cycle) simulations to calculate the ac losses. [ABSTRACT FROM AUTHOR]

Modeling high temperature superconductor (HTS) motors remains challenging mainly due to the high aspect ratio of these conductors but also because of the properties of the magnetic materials. This article presents a 2-D time dependent model to assess the ac losses of superconducting motors based on the new T–A-formulation, which by using the finite-element method, allows its implementation in commercial software. The T–A-formulation computes the magnetic flux density with different Maxwell's equations depending on the areas of the motor and makes it possible to use the thin strip approximation i.e., the HTS tapes are modeled as infinitely thin lines. The model is then expected to tackle the high aspect ratio of the HTS as well as decreasing both the mesh complexity and the computing time. The first objective of the article is to validate the method in 2-D by evaluating the ac losses of a specific synchronous motor called superconducting torque motor; the computed results are compared with good agreements to those assessed with the minimum electromagnetic entropy production method, already validated. In a second part, the same losses are computed, taking into account the field anisotropy of Jc with the implementation of a dataset based on experimentally measured Ic at 65 and 77 K. With the model proposed in this article, it is possible to calculate the magnetic field of a whole electrical machine cross section and compute the ac losses in the individual tapes of its windings within the same numerical model. [ABSTRACT FROM AUTHOR]

In this contribution, we develop a refined numerical model of pancake coils assembled from a coated conductor Roebel cable, which includes the angular dependence of the critical current density Jc on the magnetic field and the actual (three-dimensional) shape of the current lead used to inject the current. Previous works of ours indicate that this latter has an important influence on the measured value of the AC losses. For the simulation of the superconductor, we used two alternative models based on different descriptions of the superconductor’s properties and implemented in different mathematical schemes. For the simulation of the current lead we use a full three-dimensional finite-element model. The results of the simulation are compared with measurements and the main issues related to the modeling and the measurement of Roebel coils are discussed in detail. [ABSTRACT FROM PUBLISHER]