Search

In this article, inner acoustic streaming for second-order fluids has been studied analytically by employing asymptotic expansions for a thin Stokes layer and low acoustic Mach number. In addition, a multiple-timescale approach has been adopted to separate the primary oscillatory flow and the steady acoustic streaming. The study considers two sample cases: (i) motionless boundary and (ii) vibrating boundary and compares the characteristics associated with their streaming. It is observed that both the primary oscillatory flow and acoustic streaming flow fields are suppressed in second-order fluids due to the extra stress components present in the fluids. This study considers both compressible and incompressible Stokes layers to bring out the acoustic streaming characteristics associated with fluid compressibility. For the compressible Stokes layer, stronger acoustic streaming flow results for the motionless boundary, leveraging the deeper interaction between the primary oscillatory pressure field and the steady streaming. In the case of a vibrating boundary, the primary oscillatory pressure field is independent of the Stokes layer compressibility, and hence, the acoustic streaming flow remains unaltered. The extra stresses in second-order fluids reduce the acoustic body force density, and the maximum reduction has been observed for the vibrating boundary. In order to understand Lagrangian streaming, Stokes drift has also been calculated and compared for all the scenarios. The theoretical analysis and fundamental insights derived from this study have potential for applications in diverse fields such as particle manipulation, biosensing, cell sorting, and removal of loosely bound material such as non-specifically bound proteins. [ABSTRACT FROM AUTHOR]

Fluid motion induced on the surface of 100 MHz focused surface acoustic wave (F-SAW) devices with concentric interdigital transducers (IDTs) based on Y-cut Z-propagating LiNbO3 substrate was investigated using three-dimensional bidirectionally coupled finite element fluid-structure interaction models. Acoustic streaming velocity fields and induced forces for the F-SAW device are compared with those for a SAW device with uniform IDTs (conventional SAW). Both, qualitative and quantitative differences in the simulation derived functional parameters, such as device displacements amplitudes, fluid velocity, and streaming forces, are observed between the F-SAW and conventional SAW device. While the conventional SAW shows maximum fluid recirculation near input IDTs, the region of maximum recirculation is concentrated near the focal point of the F-SAW device. Our simulation results also indicate acoustic energy focusing by the F-SAW device leading to maximized device surface displacements, fluid velocity, and streaming forces near the focal point located in the center of the delay path, in contrast to the conventional SAW exhibiting maximized values of these parameters near the input IDTs. Significant enhancement in acoustic streaming is observed in the F-SAW device when compared to the conventional ones; the increase in streaming velocities was computed to be 352% and 216% for tangential velocities in propagation and transverse directions, respectively, and 353% for the normal velocity. Consequently, the induced streaming force for F-SAW is 480% larger than that for conventional SAW. In biosensing applications, this allows for the removal of smaller submicron sized particles by F-SAW which are otherwise difficult to remove using the conventional SAW. The F-SAW presents an order of magnitude reduction in the smallest removable particle size compared to the conventional device. Our results indicate that the acoustic energy focusing and streaming enhancement brought about by the F-SAW device manifests itself as enhanced biofouling removal efficiency of F-SAW throughout the device delay path compared to the conventional device, thereby providing enhanced device sensitivity, selectivity, and reusability. Furthermore, contrary to the conventional SAW in which the smallest particle is removable near the input IDTs, the F-SAW device removes the smallest particle near the device focal point. The results of this work are shown to have significant implications in typical biosensing and microfluidic applications. In a broader context, the results of the present study demonstrate a technique of enhancing streaming induced flows, which is of great importance to contemporary problems involving microfluidic and sensing applications of piezoelectric devices. [ABSTRACT FROM AUTHOR]

We report a combined three-dimensional structural and fluid structure interaction finite element study of an orthogonal surface acoustic wave (SAW) device based on langasite (LGS). Our simulation results indicate that simultaneous sensing and nonspecifically bound protein removal can be achieved through the use of multidirectional transducers on a single piezoelectric device. We find that the (0, 22, 90) Euler direction on the LGS-based device is suitable for biosensing via propagation of pure shear-horizontal waves, whereas the (0, 22, 0) direction allows for acoustic streaming induced biofouling removal through the propagation of mixed mode waves with prominent surface normal component. This study reveals the possibility of integrating sensing and biofouling removal functions on a single SAW device, thereby enhancing sensor performance. [ABSTRACT FROM AUTHOR]