Search

The application of standing surface acoustic wave (SSAW) tweezers based on backpropagation superposition to achieve precise behavior manipulation of microscale cells and even nanoscale bacteria has been widely studied and industrialized. However, the structure requires multiple transducer components or full channel resonance. It is very challenging to design a simple structure for nano-control by complex acoustic field. In this study, a reflector-interdigital transducer (R-IDT) acoustofluidic device based on unilateral coherence enhancement is proposed to achieve SSAW definition features of periodic particle capture positions. The SAW device based on a unilateral transducer can not only generate leaky-SAW in water-filled microchannel, but also have a contribution of spherical waves in the vibration area of the substrate-liquid interface due to the Huygens-Fresnel diffractive principle. Both of them form a robust time-averaged spatial periodicity in the pressure potential gradient, accurately predicting the lateral spacing of these positions through acoustic patterning methods. Furthermore, a reflector based on Bragg-reflection is used to suppress backward transmitted SAW and enhance forward conducted SAW beams. By using a finite element model, R-IDT structure's amplitude enhances 60.78% compared to single IDT structure. The particle manipulation range of the diffractive acoustic field greatly improves, verified by experimental polystyrene microspheres. Besides, biocompatibility is conformed through red blood cells and Bacillus subtilis. We investigate the overall shift of periodic pressure field that can still occur when the phase changes. This work provides a simpler and low-cost solution for the application of acoustic tweezer in biological cell culture and filtering. [ABSTRACT FROM AUTHOR]

The seeking of resonator with high Q and low insertion loss is attractive for critical sensing scenes based on the surface acoustic wave (SAW). In this work, 128° YX LiNbO3-based SAW resonators were utilized to optimize the output performance through IDT structure parameters. Once the pairs of IDTs, the acoustic aperture, the reflecting grid logarithm, and the gap between IDT and reflector are changed, a better resonance frequency of 224.85 MHz and a high Q of 1364.5 were obtained. All the results demonstrate the structure parameters design is helpful for the performance enhancement with regard to SAW resonators, especially for designing and fabricating high-Q devices. [ABSTRACT FROM AUTHOR]

As a basis for biometric and chemical analysis, issues of how to dilute or concentrate substances such as particles or cells to specific concentrations have long been of interest to researchers. In this study, travelling surface acoustic wave (TSAW)-based devices with three frequencies (99.1, 48.8, 20.4 MHz) have been used to capture the suspended Polystyrene (PS) microspheres of various sizes (5, 20, 40 μm) in sessile droplets, which are controlled by acoustic field-induced fluid vortex (acoustic vortex) and aggregate into clusters or rings with particles. These phenomena can be explained by the interaction of three forces, which are drag force caused by ASF, ARF caused by Leaky-SAW and varying centrifugal force. Eventually, a novel approach of free transition between the particle ring and cluster was approached via modulating the acoustic amplitude of TSAW. By this method, multilayer particles agglomerate with 20 μm wrapped around 40 μm and 20 μm wrapped around 5 μm can be obtained, which provides the possibility to dilute or concentrate the particles to a specific concentration. [ABSTRACT FROM AUTHOR]

Obtaining highly purified intact living cells from complex environments has been a challenge, such as the isolation of circulating tumor cells (CTCs) from blood. In this work, we demonstrated an acoustic-based ultra-compact device for cell sorting, with a chip size of less than 2 × 1.5 cm2. This single actuator device allows non-invasive and label-free isolation of living cells, offering greater flexibility and applicability. The device performance was optimized with different-sized polystyrene (PS) particles and blood cells spiked with cancer cells. Using the narrow-path travelling surface acoustic wave (np-TSAW), precise isolation of 10 μm particles from a complex mixture of particles (5, 10, 20 μm) and separation of 8 μm and 10 μm particles was achieved. The purified collection of 10 μm particles with high separation efficiency (98.75%) and high purity (98.1%) was achieved by optimizing the input voltage. Further, we investigated the isolation and purification of CTCs (MCF-7, human breast cancer cells) from blood cells with isolation efficiency exceeding 98% and purity reaching 93%. Viabilities of the CTCs harvested from target-outlet were all higher than 97% after culturing for 24, 48, and 72 h, showing good proliferation ability. This novel ultra-miniaturized microfluidic chip demonstrates the ability to sorting cells with high-purity and label-free, providing an attractive miniaturized system alternative to traditional sorting methods. [Display omitted] • A novel acoustic-based ultra-compact device for cell sorting in complex scenarios is demonstrated. • A highly tunable narrow-path travelling surface acoustic wave with high energy density generated by a single actuator is proposed. • Non-invasive and label-free isolation of higher purity living cells. • A miniaturized system alternative to traditional sorting methods is proposed, which can be further integrated with other on-chip units. [ABSTRACT FROM AUTHOR]

The ferroelectric materials own the natural anti-irradiation property, paving great potentials and applications regarding the aerospace fields. Benefiting from this property, LiNbO 3 -based surface acoustic wave (SAW) devices can be used for high accuracy sensing signal test under extreme circumstances. In this work, the 128° YX cut LiNbO 3 substrate was adopted for SAW resonator temperature sensor application, and the response frequency varied from 180.44 MHz to 177.628 MHz with temperature from 21.9 ℃ to 199.9 ℃. Subsequently, the device irradiated by 100 Krad Gamma ray was tested with vector network analyzer (VNA). A maximum frequency shift of ~ 0.38% was found under γ-ray irradiation with a dose of 100 Krad on account of slight irradiation effect. The results verify the radiation resistance ability of SAW for development of highly reliable temperature sensor in the irradiation environment. A novel SAW temperature sensor was analyzed, designed and fabricated with 128°YX LiNbO3 process platform, which can be used for testing temperature under irradiation experiment. [Display omitted] • A SAW temperature sensor was fabricated by 128° YX cut LiNbO3 which could work under the irradiation experiment. • The sensor has good anti-irradiation property, that a maximum frequency shift of 0.38% was found under γ-ray irradiation. • The SAW temperature sensor was standardized and tested, and the device showed good stability. [ABSTRACT FROM AUTHOR]