Search

The main disadvantage of electromagnetic acoustic transducers (EMATs) is their inefficiency in generating ultrasound. A new design of Rayleigh-wave EMAT is proposed with improved ultrasonic generation efficiency on non-ferromagnetic materials. The new EMAT's magnet is narrower than the meander-line coil used in the transducer and the coil itself has an uneven distribution of conductors. The principle of the new design is informed by finite element simulations, which show that the EMAT generates Rayleigh waves more efficiently by taking advantage of both horizontal and vertical magnetic fields of the magnet simultaneously. Experimental measurements verify that the maximum amplitude of the ultrasonic signal generated by the new design of EMAT working under a pulse-echo configuration has been enhanced by 90%, when compared to conventional designs. [ABSTRACT FROM AUTHOR]

Array transducers can allow wavelength and frequency selectivity and can be used to generate different types of waves, such as ultrasonic bulk or guided waves. Dual-array transducers consist of two interlaced arrays, where the elements of each array are electrically connected. Therefore, by driving each array with a pair of phased pulses one can achieve a degree of wave generation control that allows unidirectional generation, unlike single array transducers that generate waves in both 0° and 180° directions with respect to the array's longitudinal axis. In this paper, we present a one-dimensional analytical model to determine the ultrasonic waves generated by dual-array transducers based on the excitability of the array in the frequency–wavenumber domain, the so-called operation region, determined by the joint spatial and temporal spectrum of the dual-array. We further exploited it to analyse the effectiveness of unidirectional generation with time-delayed excitation signals that provide ideal constructive or destructive interferences. The model also provides the time-domain received waveforms, which were compared to experimentally generated shear-horizontal ultrasonic guided waves, with a dual periodic permanent magnet array electromagnetic acoustic transducer, showing very good agreement. The adequate selection of the excitation signal allowed one to obtain up to about 40 dB unidirectionality experimentally. • Dual-array transducers are modelled in the frequency–wavenumber domain. • The interference mechanism of two types of time-delayed pulses is analysed. • A Dual-PPM EMAT is used to experimentally generate SH guided waves unidirectionally. • Model-predicted time-domain signals and experimental ones show excellent agreement. • About 40 dB unidirectionality was achieved with the ideal excitation pulses. [ABSTRACT FROM AUTHOR]

Abstract: The amplitude of an ultrasonic signal generated by electromagnetic acoustic transducers (EMATs) is typically low when compared to those generated by contacting transducers, which restricts the application of EMATs in the fields of nondestructive testing and nondestructive evaluation. The transmission process of a surface wave EMAT is studied, based on a previously established 3-D model, with the aim of enhancing the amplitude of ultrasonic waves generated by the EMAT. The effect of changing various EMAT parameters on the surface wave is investigated, by utilizing the orthogonal test method. Results indicate that after optimization, the signal amplitude of the EMAT has increased by 25.2%. [Copyright &y& Elsevier]