Search

Background: This study aims to identify trends, research gaps, leading journals, institutions, countries, and authors by examining the top 100 cited Yttrium-90 Radioembolization (Y90) research articles. The insights gained will assist funding and collaboration efforts in Y90 research. The team analyzed 981 articles from 36 peer-reviewed journals, gathering data on authors, publication year, journal, citations, affiliations, keywords, and references. Author affiliations were scrutinized to pinpoint institutions and countries. p values < 0.05 were deemed statistically significant. The most cited paper (703 citations) was authored by Salem et al. (2010), and the journal with the most publications (16) was Journal of Vascular and Interventional Radiology. There was no significant correlation between journal impact factor and citation metrics. A decreasing trend in the number of top 100 articles was observed since the peak period (2008–2013). Most papers were published in high-impact factor (IF > 3, n = 31/35) and SCImago Q1 journals (86/100), with Northwestern University, Clínica Universidad de Navarra, and Ludwig Maximilian University of Munich being the leading institutions. The most prolific authors were Salem, R., Lewandowski, R.J., and Mulcahy, M.F., with Salem, R. as the most influential. A statistically significant positive correlation between collaborative links and published articles was also discovered. Short conclusion: The top 100 cited articles were primarily published in high-impact journals, and Northwestern University and the USA showed greater productivity and collaboration. These findings have crucial implications for researchers, policymakers, and institutions, aiding in the improvement of Y90 application and understanding in clinical practice. [ABSTRACT FROM AUTHOR]

To provide a dynamic perspective on the evolution of Mendeley readership, this study conducts an 8‐year longitudinal analysis of approximately 3.4 million scholarly papers published in 2015. Mendeley readership data were collected annually from 2016 to 2023 for the sampled papers to analyze the temporal accumulation patterns of readership following publication. The results indicate that Mendeley readership exhibits a speed advantage compared to citations and a prevalence advantage compared to Twitter mentions, demonstrating both initial prevalence and sustained growth on a yearly basis. However, the patterns of accumulation vary across disciplines, with papers in Biomedical and Health Sciences showing the fastest accrual of extensive Mendeley readership data. Leveraging demographic data provided by Mendeley, this study further investigates how different user groups—categorized by academic status, disciplinary affiliation, and geographic location—engage with papers across various disciplines. The findings highlight Mendeley readership as a rapid and substantial altmetric, yet they also emphasize the need to interpret the nature of the attention captured by Mendeley readership with caution, considering its potential biases introduced by the varying engagement levels of different user groups across disciplines. [ABSTRACT FROM AUTHOR]

Digital games are one of the most engaging forms of media. Players can have a first-hand experience and the possibility of feeling immersed within a digital setting where agency is exerted. This paper seeks to understand the role of digital games as new means of communication and their potential to convey messages that may defy gamers to question the moral grand narratives that shape contemporary societies. In a moment when many countries have opted to close or limit the circulation in their borders, it is important to think about the role played by the border as a historic liminal entity for the representation of societies and communities, distinguishing those who belong from those who do not. The representation of the border in digital games have tended to follow one of the main tropes explored in other media: the border as a physical space that set boundaries between different nations and different regions of the world. In order to assert the potential of digital games to offer a more comprehensive representation of the border as a liminal space, the case of Papers, Please! (2013) will be analyzed. Based on a qualitative methodology, having content analysis as primary data collection method, the paper intends to contribute to the discussion on how history may narrativized and, eventually, reinterpreted in digital games. Papers, Please! analysis will be centered on the relationship that is set between player and border, that is presented as a liminal space where the game's action takes places entirely. Moreover, the paper intends to discuss the role that has been played by digital games in the representation of serious topics and how they have evolved as communication tools beyond their role as entertainment products. [ABSTRACT FROM AUTHOR]

mHealth applications (apps) are tools that can enhance research by efficiently collecting and storing large amounts of data. However, data collection alone does not lead to change. Innovation and practice change occur through utilisation of evidence. The volume of data collected raises questions regarding utilisation of data by nurses and midwives, and how data from mHealth apps can be used to improve person-centred practice. There is limited empirical evidence and a lack of direction from global health authorities to guide nurses and midwives in this area. To describe strategies for nurses and midwives that could enhance the effective use of data generated by mHealth apps to inform person-centred practice. The purpose of this paper is to stimulate reflection and generate actions for data utilisation when using mHealth apps in nursing research and practice. This discussion paper has been informed by current evidence, the integrated-Promoting Action on Research Implementation in Health Services (i-PARIHS) framework, and research experience as part of doctoral study. Before engaging in data collection using mHealth apps, nurses and midwives would benefit from considering the nature of the evidence collected, available technological infrastructure, and staff skill levels. When collecting data and interpreting results, use of a team approach supported by engaged leadership and external facilitation is invaluable. This provides support to operate apps, and more importantly use the data collected to inform person-centred practice. This paper addresses the limited available evidence to guide nurses and midwives when using mHealth apps to collect and use data to inform practice change. It highlights the need for appropriate technology, external facilitative support, engaged leadership, and a team approach to collect meaningful evidence using mHealth apps. Clinicians, leaders, and researchers can apply the strategies provided to enhance the use of mHealth apps and ensure translation of evidence into practice. [ABSTRACT FROM AUTHOR]

This is a proposal for publishing resource papers as registered reports in the Northern European Journal of Language Technology. The idea is that authors write a data collection plan with a full data statement, to the extent that it can be written before data collection starts. Once the proposal is approved, publication of the final resource paper is guaranteed, as long as the data collection plan is followed (modulo reasonable changes due to unforeseen circumstances). This proposal changes the reviewing process from an antagonistic to a collaborative enterprise, and hopefully encourages NLP resources to develop and publish more high-quality datasets. The key advantage of this proposal is that it helps to promote responsible resource development (through constructive peer review) and to avoid research waste. [ABSTRACT FROM AUTHOR]

Background : The current UK standard for major trauma patients is to record notes in a paper trauma booklet. Through an innovative collaboration between a major trauma centre and a digital transformation industry partner, a TraumaApp was developed. Electronic notes have been shown to have fewer errors, granular data collection and enable time stamped contemporaneous record keeping. Implementation of digital clinical records presents a challenge within the context of trauma multidisciplinary trauma resuscitation. Data can be easily accessible and shared for quality improvement, audit and research purposes. This study compared paper and electronic notes for completeness and for acceptability data following the implementation of the TraumaApp. Methods: Trauma team members who performed scribe function attended training for the newly launched TraumaApp. Two staff members acted as scribe, using either the paper trauma booklet or TraumaApp, and attended major trauma calls. A framework for comparison of paper and electronic notes was created and used for a retrospective review of major trauma patients' notes. Statistical analysis was performed using a two-tailed t-test. Staff using the TraumaApp completed a System Usability Score questionnaire. Results: There was a total of 37 data points for collection per case. The mean numbers collected were paper notes 24.1 of 37 (65.1%) and electronic notes, 25.7 of 37 (69.5%). There was no statistical significance between the completeness of paper and electronic notes. The mean System Usability Score was 68.4. Discussion: Recording accurate patient information during a major trauma call can be challenging and the role of the scribe to accurately record events is critical for immediate and future care. There was no statistically significant difference in completeness of paper and electronic notes, however the mean System Usability Score was 68.4, which is greater than the internationally validated standard of acceptable usability. Conclusion: It is feasible to introduce digital data collection tools enabling accurate record keeping during trauma resuscitation and improve information sharing between clinicians. [ABSTRACT FROM AUTHOR]

Background Research theses can have a significant impact on the development of applied sciences, especially when their results are published. Objective This study aims to determine publication rate of papers extracted from the medical residency and master’s degree theses of Guilan University of Medical Sciences (GUMS) during 2008-2018. Methods This is a descriptive cross-sectional study. The data were collected from the medical residency and master’s degree theses of GUMS from 2008 to 2018. Then, they were searched in international and national databases according to the title, keywords, and names of supervisors, advisors, and students. Results Of 774 theses, 449 (58 %) papers had been extracted and published in journals indexed by ISI/ PubMed (41.2%), Scopus (11.8%), BIOSIS, Chemical Abstract, and Embase (0.44%) and others (46.56%). Most of them (98.66%) were original research. Moreover, in 383(85.3%) of the theses, there was no statistician or data advisor. The median time from defending theses to the publication of a paper from them was two years. Conclusion The publication of papers extracted from the theses of GUMS has increased, and more than 50% of them have been published in journals indexed by ISI, PubMed, and Scopus. However, the factors associated with the publication of papers need to be surveyed. [ABSTRACT FROM AUTHOR]

This methodological guidance paper discusses the craft of reviewing qualitative research for a systematic review. Qualitative research is an expansive and wide-ranging domain that includes research from different disciplines, for different purposes, following different methodological traditions, and employing a variety of data collection and analysis methods. While many aspects of reviewing qualitative research are similar to reviewing quantitative research, the essay focuses on five central tasks: (1) clarifying purpose(s), (2) defining research quality, (3) situating the research in relevant contexts, (4) adding it up, and (5) practicing reflexivity—that every reviewer of qualitative research engages in. [ABSTRACT FROM AUTHOR]

Surface properties include both surface roughness and friction. With a stylus-type contact method, it is necessary to obtain either a surface roughness profile or a friction profile that is affected by stylus shape and size, its contact force on the sample, the scan speed, and the data acquisition rate. As a new surface parameter, the mean absolute deviation (MAD) from an average property has been introduced. It represents the deviation from either the roughness average (Ra) and the average coefficient of friction (COF), respectively. While Ra or average COF depends on the instrument and its operating conditions, the MAD should not depend on them because it represents the variations within the sample. [ABSTRACT FROM AUTHOR]

The data paper is an emerging academic genre that focuses on the description of research data objects. However, there is a lack of empirical knowledge about this rising genre in quantitative science studies, particularly from the perspective of its linguistic features. To fill this gap, this research aims to offer a first quantitative examination of which rhetorical moves—rhetorical units performing a coherent narrative function—are used in data paper abstracts, as well as how these moves are used. To this end, we developed a new classification scheme for rhetorical moves in data paper abstracts by expanding a well‐received system that focuses on English‐language research article abstracts. We used this expanded scheme to classify and analyze rhetorical moves used in two flagship data journals, Scientific Data and Data in Brief. We found that data papers exhibit a combination of introduction, method, results, and discussion‐ and data‐oriented moves and that the usage differences between the journals can be largely explained by journal policies concerning abstract and paper structure. This research offers a novel examination of how the data paper, a data‐oriented knowledge representation, is composed, which greatly contributes to a deeper understanding of research data and its publication in the scholarly communication system. [ABSTRACT FROM AUTHOR]

With the advancement of mobile technology, mobile-assisted language learning (MALL) has significant potential regarding its practical applications and benefits in foreign language learning. Nevertheless, little research was conducted to examine factors regarding the facilitation of oral communication through MALL based on established theories or models. The purpose of this review is to investigate the main constituents conducive to the intended outcomes based on an adapted model from Beatty (2010) and further provide guidelines for enthusiastic stakeholders in the field. Twenty-eight empirical studies were collected and categorized according to four key variables of the design model and analyzed qualitatively, with the key findings identified as follows. Due to the technical affordance of mobile technology, it is found that a student-centered self-regulated learning context is created, where students construct knowledge through self-instruction, self-evaluation, and self-correction. Furthermore, a speaking strategy-driven collaborative-based learning design enhances students' oral proficiency through strong social connections, interactions, and communication. Finally, given the pedagogical design and practices, high-level cognitive thinking is thereby promoted, with promising affective learning outcomes. In light of the findings, guidelines for educational practitioners, learners, and system designers are provided for pedagogical and practical application in the future. [ABSTRACT FROM AUTHOR]

Over the past few years, the emergence of electrochemical wearable sensors has attracted considerable attention because of their promising application in point‐of‐care testing due to some features such as high sensitivity, simplicity, miniaturization, and low fabrication cost. Recent developments in new fabrication approaches and innovative substrates have resulted in sensors able to real‐time and on‐body measurements. Wearable electrochemical sensors have also been combined with paper‐based substrates and directly used on human skin for different applications for non‐invasive analyses. Furthermore, wearable electrochemical sensors enable monitoring analytes in different biofluids without complex procedures, such as pre‐treatment or sample manipulation. The coupling of IoT to various wearable sensors has also attracted attention due to real‐time data collection and handling in remote and resource‐limited conditions. This mini‐review presents the significant advances in developing wearable electrochemical devices, such as sampling, data collection, connection protocols, and power sources, and discusses some critical challenges for higher performance in this field. We also present an overview of the application of paper as an intelligent substrate for electrochemical wearable sensors and discuss their advantages and drawbacks. Lastly, conclude by highlighting the future advances in wearable sensors and diagnostics by coupling real‐time and on‐body measurements to multiplexed detection of different biomarkers simultaneously, reducing the cost and time of classical analysis to provide fast and complete overall physiological conditions to the wearer. [ABSTRACT FROM AUTHOR]

Ocean research currently relies heavily on bulky bioelectronic tags and sensory telemetry networks for data collection. Therefore, in this study, a compact and flexible waterproof bioelectronic tag with a kirigami (paper cutting)‐based design for underwater conductivity, temperature, depth, and strain sensing is designed and evaluated. Unlike invasive bioelectronic tags, the kirigami bioelectronic tag can be attached to robotic fish or aquatic animals without harming the host. The kirigami‐based design facilitates excellent stretchability and reduces stress within the sensor, thus inhibiting crosstalk induced by movement during multimodal sensing. A working bioelectronic tag is fabricated and tested. Notably, the performance of the kirigami sensors shows very little degradation even after >1000 stretching cycles. Specifically, the multimodal bioelectronic tag demonstrates a wide working pressure range of 0–5.0 MPa, and the kirigami design effectively suppresses signal coupling. The kirigami‐based bioelectronic tag is applied to a robotic dolphin and underwater environmental parameters and detailed movement parameters, such as swing angle, swing frequency, and typical gestures are detected simultaneously with high sensitivity and accuracy. Therefore, the device can be applied to a broad range of applications in various fields such as behavioral biology, ocean informatics, and underwater robotics. [ABSTRACT FROM AUTHOR]

Background: Novel survey methods are needed to tackle declining response rates. The 2020 National Maternity Survey included a randomised controlled trial (RCT) and social media survey to compare different combinations of sampling and data collection methods with respect to: response rate, respondent representativeness, prevalence estimates of maternity indicators and cost. Methods: A two-armed parallel RCT and concurrent social media survey were conducted. Women in the RCT were sampled from ONS birth registrations and randomised to either a paper or push-to-web survey. Women in the social media survey self-selected through online adverts. The primary outcome was response rate in the paper and push-to-web surveys. In all surveys, respondent representativeness was assessed by comparing distributions of sociodemographic characteristics in respondents with those of the target population. External validity of prevalence estimates of maternity indicators was assessed by comparing weighted survey estimates with estimates from national routine data. Cost was also compared across surveys. Results: The response rate was higher in the paper survey (n = 2,446) compared to the push-to-web survey (n = 2,165)(30.6% versus 27.1%, difference = 3.5%, 95%CI = 2.1–4.9, p < 0.0001). Compared to the target population, respondents in all surveys were less likely to be aged < 25 years, of Black or Minority ethnicity, born outside the UK, living in disadvantaged areas, living without a partner and primiparous. Women in the social media survey (n = 1,316) were less representative of the target population compared to women in the paper and push-to-web surveys. For some maternity indicators, weighted survey estimates were close to estimates from routine data, for other indicators there were discrepancies; no survey demonstrated consistently higher external validity than the other two surveys. Compared to the paper survey, the cost saving per respondent was £5.45 for the push-to-web survey and £22.42 for the social media survey. Conclusions: Push-to-web surveys may cost less than paper surveys but do not necessarily result in higher response rates. Social media surveys cost significantly less than paper and push-to-web surveys, but sample size may be limited by eligibility criteria and recruitment window and respondents may be less representative of the target population. However, reduced representativeness does not necessarily introduce more bias in weighted survey estimates. [ABSTRACT FROM AUTHOR]

The article presents a new technique for analyzing phenomena occurring during the measurement of the strength properties of paper in the conditions of compression of the tested samples with forces acting in the paper plane. The technique is based on collecting data on the current distance of the clamps holding the tested sample and the force exerted on the sample using a universal testing machine and on the simultaneous recording of image sequence of the sample during the measurement. Next, the resulting images are subjected to processing and analysis, the purpose of which is to extract information about the shape of the sample edge in all phases of the measurement. Its advantage is the ability to determine the deflection arrow of the sample and describe its shape using the selected function given by the analytical parametric formula. It will be helpful in further research on the development of an analytical model describing the phenomena occurring during paper compression, and a method to determine the mechanism of paper destruction and the corresponding maximum force that destroys a paper sample. [ABSTRACT FROM AUTHOR]

The main problem identified is the conventional way of distributing indirect manufacturing costs for the paper company dedicated to the process of converting paper, having generated distorted unit costs. Faced with this situation, the implementation of a costing model by activities was proposed. The main objective of this research is to establish procedures for the implementation of the costing methodology by activities for the paper industry. The methodological study is quantitative at a descriptive level where data collection was done in a simple random manner, for which documents were reviewed and analyzed, production processes were observed, and surveys were developed. The results confirmed the achievement of the objectives and hypotheses raised in the investigation, where it was indicated that there is a relationship between the activity-based costing methodology and the measurement of indirect costs in the paper industry. The investigation is concluded "Activity-based methodology is beneficial to apply in the calculation of indirect costs, with a new approach to calculating costing by activities that allows diversifying suitable inducers and applying them to the different activities related to indirect costs. [ABSTRACT FROM AUTHOR]

Aims: The purpose of this study is the analysis of bibliometric studies of the medical most-cited papers. Materials and Methods: This applied and the scientometric study was conducted using retrospective bibliometric analysis methods. AScopus search was conducted and 883 articles were retrieved. After reviewing the titles and abstracts, 432 articles related to the purpose of this research were identified. Items such as year, journal, country, and institution were considered. Medical subject heading and NLM were applied for the subject categorization of articles. Given the dynamics of subject areas over time, only the content of 117 articles published in 2020 and 2021 were analyzed. These 117 articles have been reviewed with 11,700 most-cited articles. By reviewing 117 articles, the most productive journal, country, and institute in producing 11,700 articles were identified. Results: The findings have shown a significant number of these publications review 100 most-cited articles in the field of medicine. Articles pertaining to the Nervous System, Musculoskeletal System, Dentistry, Radiology, and Cardiovascular System are the most numerous among the publications. Conclusion: The results of this study allow readers to know the most productive countries, institutions, and journals of various subject areas, as well as the most influential fields and research trends in that subject area. The results of this study also identify subject areas for which the characteristics of their core articles have not yet been explored to plan future research. [ABSTRACT FROM AUTHOR]

Background: Peer evaluation is the cornerstone of science evaluation. In this paper, we analyze whether or not a form of peer evaluation, the pre-publication selection of the best papers in Computer Science (CS) conferences, is better than random, when considering future citations received by the papers. Methods: Considering 12 conferences (for several years), we collected the citation counts from Scopus for both the best papers and the non-best papers. For a different set of 17 conferences, we collected the data from Google Scholar. For each data set, we computed the proportion of cases whereby the best paper has more citations. We also compare this proportion for years before 2010 and after to evaluate if there is a propaganda effect. Finally, we count the proportion of best papers that are in the top 10% and 20% most cited for each conference instance. Results: The probability that a best paper will receive more citations than a non best paper is 0.72 (95% CI = 0.66, 0.77) for the Scopus data, and 0.78 (95% CI = 0.74, 0.81) for the Scholar data. There are no significant changes in the probabilities for different years. Also, 51% of the best papers are among the top 10% most cited papers in each conference/year, and 64% of them are among the top 20% most cited. Discussion: There is strong evidence that the selection of best papers in Computer Science conferences is better than a random selection, and that a significant number of the best papers are among the top cited papers in the conference. [ABSTRACT FROM AUTHOR]

• Remote testing is suitable when performing complex tests requiring careful training. • One-solution test is reliable to assess PROP status in live remote condition. • PROP impregnated paper disks are a valid alternative to solutions in lab setting. • PROP disks can be used out-of-lab if a strict control is provided by the personnel. • Reliable remote testing procedures will promote research in vulnerable populations. Solutions and paper disks are widely used methods for classifying people by their ability to perceive 6-n-propylthiouracil (PROP). Recently, remote sensory testing carried out under the supervision of the panel leader, has been found to be a valid alternative to the traditional lab-setting, offering several practical advantages. This study aimed to validate a protocol for PROP status assessment in remote condition and to compare the results obtained using solutions and paper disks. Individual differences in bitterness responsiveness and the relative classification between two different testing conditions (remote and laboratory) and two stimuli (solutions and disks) were compared. 77 subjects (18–30 years; 60 % women) participated in two sessions (one in laboratory and one in remote setting) and rated the perceived intensity of PROP solutions and disks. Mean PROP ratings did not vary across remote and lab conditions (p = 0.844). PROP phenotype classifications in remote-solution and lab-disk conditions were comparable to lab-solution reference condition (with a misclassification rate of 27 % and 31 % respectively, all occurring within contiguous groups). In contrast, the classification in remote-disk condition was not fully comparable (misclassification in respect to lab-solution of 48 % in contiguous groups, and 1.3 % in non-contiguous groups). One-solution test appears as a reliable procedure for PROP status assessment in live remote testing. Also, impregnated paper disks represent a suitable alternative to solution testing in conventional lab setting for practical reasons. However, paper disks could represent a valid option for data collection outside the lab, but they require rigorous in-person control by the sensory personnel when used. [ABSTRACT FROM AUTHOR]

Why you should read this article: • To avoid bias in analysis, interpretation and generalisability of findings that can occur from missing data when using self-administered questionnaires • To develop strategies to prevent missing data in self-administered questionnaires • To understand the methodological and statistical considerations underlying the use of prevention strategies in quantitative studies Background: Self-administered questionnaires are efficient and low-cost ways of collecting data with wide cohorts. Nonetheless, their use in studies can result in a high occurrence of missing data, which can affect the statistical power, representativeness and generalisability of the findings. Imputation methods have been considered efficient statistical techniques for managing missing data. However, they have also been associated with limits, such as the risk of under-estimation of the effect, lower statistical power and decrease of correlation among variables. Recent studies have highlighted the importance of using prevention strategies to avoid missing data before the data are analysed. Aim: To identify strategies for preventing the occurrence of missing data and to discuss their effects, as well as their methodological and statistical considerations. Discussion: The article discusses prevention strategies related to the administration format and follow-up and reminders. Strategies such as the use of electronic tablets, email and telephone reminders are associated with lower rates of missing data in self-administered questionnaires. However, methodological and statistical limits, including the absence of a comparison group and statistical validation of the reported results, limits the capacity to establish robust consensus. Conclusion: Prevention strategies represent relevant and feasible avenues for handling missing data in a wide range of clinical, nursing and epidemiological research. More projects based on robust design are needed to ensure accurate and reliable data are collected from patients, families, communities and clinicians. Implications for practice: It is important for clinicians and nurses to understand the phenomenon of missing data and the strategies available to prevent missing data, to collect data representing the patients' and families' perspectives and experiences. [ABSTRACT FROM AUTHOR]

In this paper, we propose a method of generating the elemental image array (EIA) for the integral imaging (InIm) based light field display (LFD). Firstly, we reveal the intrinsic voxel spatial distributions of the InIm‐based LFD and analyze how the voxel space affects the display performances such as spatial resolution, depth of field, and smoothness of parallax. Then, we present an algorithm to generate an EIA from a pair of RGB and depth (RGBD) images and an optimally selected voxel space. In the experiments, we tested the display performances of the voxels on different depth planes and obtained results consistent with the theoretical analyses. We also experimented with a computer 3D model and a real‐world scene on two InIm‐based LFD prototypes working in different modes, one in real mode and the other in virtual mode, and obtained favorable 3D display effects. The proposed method simplifies the light field data acquisition and image synthesis process, and supports handling both the virtual and the real‐world 3D scenes. We expect the proposed system to help the practical application of the InIm‐based LFD technology. [ABSTRACT FROM AUTHOR]

Purpose – This study aims to examine a comparative analysis of electronic- and paper-based data collection methods. Design/methodology/approach – Survey research approach was adopted to conduct the study. A total of 500 library and information science (LIS) researcher/information professionals selected randomly from seven states in Nigeria represent the sample for the study. A self-designed questionnaire was used to gather data from the respondents. Six objectives were developed to guide the study. Findings – The findings reveal that there is preference for paper-based than the electronic-based data collection methods, and similarly, respondents indicated they cannot use any other data collection methods other than paper-based. Electronic data collection method is beneficial in terms of gathering a representative sample within a short period compared to the paper-based method. The researcher has control over access to the survey in the paper-based method compared to the electronic method, and there is opportunity to monitor the progress of the research and clarify ambiguity by the researcher. The electronic method is limited in terms of collecting data from only the respondents who are computer-literate with good Web skills, while the paper-based method is limited by higher attrition rate, money and time consumption. Research limitations/implications – The study did not consider the time needed to gather data with each method or the amount of time needed for data entry, cleaning and coding. It is possible that a time-motion study would reveal clear superiority of either one method or the other. The total sample of participants in the study is also limited, considering the total number of LIS researcher/information professionals in Nigeria. Practical implications – The study has underlined the value of electronic/Web-based collection as a cost- and time-saving instrument in modern LIS research. Regardless of method and trial, electronic data collection could fulfill in all examined parameters, its promises, realizing cost savings of up to a 50 per cent in comparison with the paper-based data collection method. Originality/value – The paper is solely the idea of the author. [ABSTRACT FROM AUTHOR]

The medium-consistency (MC) pump is the key unit in modern pulp and paper industry, especially in medium-consistency bleaching plant. Use of MC pump improves the efficiency of bleaching sequences and reduces the pollution load of bleaching effluents. In this work, the component of MC pump, e. g. turbulence generators with three typical structures were studied to evaluate the effects of turbulence generator structure on the performance of MC pump. An automatic control system was built to control operation condition and to collect data online. Head and efficiency were calculated to evaluate the differences among three turbulence generators. The results showed that the linear-type, twist-type and screw-type turbulence generators exhibited similar performance (pump head and efficiency) of MC pump at high rotation speed (2000 rpm to 2900 rpm) compared to the well-known performance of MC pump at rotation speed lower than 2000 rpm which are significant different for the three turbulence generators.

Regulatory failure caused by overlapping regulations is ubiquitous, with examples in all jurisdictions across a range of disciplines. Overlapping regulation can be problematic. It obscures policy objectives and hinders the development of effective and clear regulation. In addition, regulatory overlap can inflict real costs on businesses through repetitive inspections and data collection efforts. It is particularly burdensome when agencies issue conflicting rules with inconsistent standards. Recognizing that regulatory overlap exists and is a problem provides the context to this program of research. Our research project was an exploration using a systematic quantitative literature review (SQLR) method to better understand the way regulatory failure, caused by overlapping regulations, has featured in academic literature. The SQLR method was chosen as it employs a systematic process to consolidate a sample of literature, and quantitative measures to draw connections between different academic sources. Ultimately, our research concluded that the literature does not provide clear prescriptive principles for reducing unnecessary regulatory overlap. This begs a question as to whether more research is needed in this area, or alternatively whether the complexities raised by regulatory overlap are not reducible to general principles. [ABSTRACT FROM AUTHOR]

The growing collection of scientific data in various web repositories is referred to as Scientific Big Data, as it fulfills the four “V’s” of Big Data—volume, variety, velocity, and veracity. This phenomenon has created new opportunities for startups; for instance, the extraction of pertinent research papers from enormous knowledge repositories using certain innovative methods has become an important task for researchers and entrepreneurs. Traditionally, the content of the papers are compared to list the relevant papers from a repository. The conventional method results in a long list of papers that is often impossible to interpret productively. Therefore, the need for a novel approach that intelligently utilizes the available data is imminent. Moreover, the primary element of the scientific knowledge base is a research article, which consists of various logical sections such as the Abstract, Introduction, Related Work, Methodology, Results, and Conclusion. Thus, this study utilizes these logical sections of research articles, because they hold significant potential in finding relevant papers. In this study, comprehensive experiments were performed to determine the role of the logical sections-based terms indexing method in improving the quality of results (i.e., retrieving relevant papers). Therefore, we proposed, implemented, and evaluated the logical sections-based content comparisons method to address the research objective with a standard method of indexing terms. The section-based approach outperformed the standard content-based approach in identifying relevant documents from all classified topics of computer science. Overall, the proposed approach extracted 14% more relevant results from the entire dataset. As the experimental results suggested that employing a finer content similarity technique improved the quality of results, the proposed approach has led the foundation of knowledge-based startups. [ABSTRACT FROM AUTHOR]

There are many problems in the process of collecting paper data using single data source, such as insufficient data comprehensiveness and limited data collection speed due to website access frequency limitation. Aiming at these problems, this paper proposed a paper data crawling technology for multi-data sources. Firstly, it used the four Chinese document service websites-How Net, Wanfang Data, Weipu, and Chaoxing as data sources, completed the task of crawling and parsing list page data for the search keywords. Then it used the task scheduling strategy to remove repeated data and balance the tasks. Finally, it used multi-threads for each data source to crawl, parse and store the detail information of the papers, and built a website for search and display. Experiments show that under the same crawling and parsing speed, this technology can complete the paper information collection task more comprehensively and efficiently, which proves the effectiveness of this technology. [ABSTRACT FROM AUTHOR]

The aim of this academic paper is to discuss and illustrate the significant role and duties of a lecturer, a tutor and a teacher in the process of learning and explain their utmost contribution to the promotion of the students educationally, emotionally and ethically. At the beginning of the academic paper, a brief description has been explained to distinguish between the teacher and the lecturer and between the tutor and the instructor. Then, the duties and responsibilities of a lecturer, a tutor and a teacher have been clarified. It is recommended that teachers and lecturers should be real leaders to their students and encourage them to improve their standard of education and promote their personalities by adopting better qualities and ethics in their life. Educational centers are expected to give more emphasis on the importance of training teachers, lecturers and tutors in order to help them teach and react to students positively and efficiently. [ABSTRACT FROM AUTHOR]

This study examined home country bias in the New England Journal of Medicine (NEJM). Bibliographic information of publications in the NEJM from 2000 to 2019 was collected as data. Bibliometric analyses were performed to investigate the number of papers with one or more US‐based authors in the NEJM and compare this to other journals. Citation counts of US‐based and non‐US papers were calculated and compared. The results show that US‐based papers account for 65.44% of the NEJM papers, and the US share of the NEJM papers has remained stable in the examined years whereas in other journals the percentage decreased. More importantly, US‐based papers in the NEJM display significantly lower research impact compared with non‐US papers. The results suggest that US‐based papers are favoured by the NEJM and a home country bias may exist in the publication process of the journal. [ABSTRACT FROM AUTHOR]

Background: The strengths and difficulties questionnaire (SDQ) is one of the most common screening tools to detect children and adolescents who are at risk of mental health problems or have psychiatric disorders. The standard mode of SDQ completion is on paper; however, some studies used phone administration and argued that this is a feasible and valid method that can substitute in-person administration. However, few studies have investigated the validity and reliability of phone administration of the SDQ. Objectives: The current study aimed to compare the telephone versus paper-and-pencil administration of the SDQ among Iranian child and adolescent outpatients. Methods: Sixty six parents with children aged 3 to 15 years completed the SDQ questionnaire using paper-and-pencil and telephone interview techniques. The study was performed in 2016, and participants were from the city of Tehran (capital of Iran). Participants were first divided into two groups. Then, one of them first completed the questionnaire using the face-to-face interviews, and 3 to 4 days later, they again completed the questionnaire using the telephone interview. And the vice versa occurred for the other group. The Pearson correlation analysis was used to calculate the correlation between the two methods in each group separately. Intra-class correlation (ICC) analysis was used to investigate the association between the two administration methods. Results: A significant positive correlation was found between the two types of administration in both groups (P < 0.05). Intra-class correlation coefficients indicated a good correlation between the scores obtained from each method of administration (all P values were < 0.001). Conclusions: Telephone administration of SDQ is a reliable method for collecting data when studying emotional and behavioral symptoms in children and adolescents attending outpatient psychiatric centers. [ABSTRACT FROM AUTHOR]

Purpose: Patient-reported outcome (PRO) measures are essential for assessing subjective patient experiences. Interactive voice response (IVR) data collection provides advantages for clinical trial design by standardizing and centralizing the assessment. Prior to adoption of IVR as a mode of PRO administration in the Testosterone Trials (TTrials), we compared IVR to paper versions of the instruments to be used.Methods: IVR versions of the FACIT-Fatigue scale and Psychosexual Daily Questionnaire, Question 4, were developed. In one pilot study, IVR versions of these scales were compared to paper versions in 25 men ≥ 65 years at each of two clinical sites. In another study, IVR versions of the SF-36 Vitality Scale (SF-36), Positive and Negative Affect Scale, and Patient Health Questionnaire were evaluated in comparison with previously validated paper versions in 25 men at two clinical sites. Both paper and IVR versions of each instrument were administered in counterbalanced order, and test-retest reliability was evaluated by repeated administration of the test. Bland-Altman plots were used to assess the degree of agreement. Test-retest correlations for each measure were also determined.Results: Satisfactory agreement was observed between IVR and paper versions of each study measure. Specifically, linear and highly positive associations were observed consistently across the study for IVR and paper versions of all study measures. These ranged from r = 0.91-0.99. Test-retest reliability for all measures was acceptable or better (r = 0.70-0.90).Conclusions: The IVR versions of TTrials endpoints in these two studies performed consistently well in comparison with paper versions. [ABSTRACT FROM AUTHOR]

On-site surveys involving face-to-face interviews are implemented globally across many scientific disciplines. Incorporating new technologies into such surveys by using electronic devices is becoming more common and is widely viewed to be more cost-effective and accurate. However, Electronic Data Capture methods (EDC) when compared to traditional Paper-based Data Capture (PDC) are often implemented without proper evaluation of any changes in efficiency, especially from surveys in coastal and marine environments. A roving creel survey of recreational shore-based fishers in Western Australia in 2019 enabled a direct comparison between the two methods. Randomisation strategies were employed to ensure biases in using each technique were minimised. A total of 1,068 interviews with recreational fishers were undertaken with a total error rate of 5.1% (CI95%: 4.8–5.3%) for PDC and 3.1% (CI95%: 2.9–3.3%) for EDC. These results confirmed that EDC can reduce errors whilst increasing efficiency and decreasing cost, although some aspects of this platform could be improved with some streamlining. This study demonstrates how EDC can be successfully implemented in coastal and marine environments without compromising the randomised, stratified nature of a survey and highlights the cost-effectiveness of this method. Such findings can be widely applied to any discipline which uses face-to-face interviews for data collection. [ABSTRACT FROM AUTHOR]

One method for disposing of old, damaged, or misprinted Qur’an pages is to burn them. Recently, there have been cases of al-Quran mushaf disposal management that do not comply with the maqasid of al-Quran text disposal as stipulated in established guidelines. Furthermore, the number of damaged al-Quran manuscripts is growing, making the collection site increasingly limited in capacity. To save money and space, it was discovered that some institutions in charge of disposal have delegated this task to unauthorized parties, such as non-Muslim parties, which disposed of al-Quran text at paper mills. Therefore, this article discusses the perspectives and evaluations of religious scholars on the methods used by Malaysian institutions to dispose of al-Quran text. Document analysis and interviews with the State Muftis of Selangor, Kelantan and Terengganu were used to collect data. It was done through semi-structured interviews and descriptive analysis. According to findings, the Malaysian government has implemented several methods. One method used is to burn it to ashes, bury it, and then wash it into the sea. Many authorised institutions carry out disposal in accordance with the established guidelines. [ABSTRACT FROM AUTHOR]

This study aims to determine the creative thinking patterns of students contained in scientific papers. The method used is a qualitative research method. Sources of data in research are students and documents in the form of papers. There are three data collection techniques, namely (1) reading papers, (2) interviews, and (3) observation. The results of this study show a pattern of lateral thinking that appears in several developments of ideas. Then, there are still traditional thinking patterns. Factors that cause traditional thinking are (1) experience, (2) sources of information, (3) lack of confidence, and (4) willingness to learn. [ABSTRACT FROM AUTHOR]

Background: Paper patching, a method that places cigarette paper over the most mobile quadrants of the tympanic membrane, is one of the treatment options for patulous eustachian tube (PET). Aims/Objectives: The objective of this study was to compare the outcomes of two different treatment strategies for PET. Material and methods: Twenty-three patients underwent paper patching of the tympanic membrane and 16 patients were treated with nasal saline irrigation with or without ipratropium bromide nasal spray. Medical records were reviewed for resolution of PET symptoms as categorical variables (complete remission, partial remission, or no improvement) with a minimum follow-up of 3 months. Results: Immediately after undergoing paper patching, 20 of the 23 patients (87.0%) reported complete remission (CR). The percentage of CR after paper patching was 82.6% at 1 month and 65.2% at 3 months. A greater percentage of patients reported CR of aural symptoms in the paper patching group than in the nasal irrigation group at both 1 and 3 months after treatment (p < .05). Conclusions and significance: Repetitive paper patching resolves aural discomfort in most PET patients for at least 3 months and can be considered as a first-line treatment option for PET in the outpatient setting. [ABSTRACT FROM AUTHOR]

Background: Delivery of major trauma care is complex and often fast paced. Clear and comprehensive documentation is paramount to support effective communication during complex clinical care episodes, and to allow collection of data for audit, research and continuous improvement. Clinical events are typically recorded on paper-based records that are developed for individual centres or systems. As one of the priorities laid out by the Scottish Trauma Network project was to develop an electronic data collection system, the TraumaApp was created as a data collection tool for major trauma that could be adopted worldwide.Methods: The study was performed as a service evaluation based at the Queen Elizabeth University Hospital Emergency Department. Fifty staff members were recruited in pairs and listened to five paired major trauma standby and handover recordings. Participants were randomised to input data to the TraumaApp and one into the existing paper proforma. The time taken to input data add into was measured, along with time for clarifications and any errors made. Those using the app completed a System Usability Score.Results: No statistically significant difference was demonstrated between times taken for data entry for the digital and paper documentation, apart from the Case 5 Handover (p < 0.05). Case 1 showed a significantly higher time for clarifications and number of errors with digital data collection (p = 0.01 and p = 1.79E-05 respectively). There were no other differences between data for the app and the proforma. The mean System Usability score for this cohort was 75 out of 100, with a standard deviation of 17 (rounded to nearest integer).Conclusion: Digital real-time recording of clinical events using a tool such as the TraumaApp is comparable to completion of paper proforma. The System Usability Score for the TraumaApp was above the internationally validated standard of acceptable usability. There was no evidence of improvement in use over time or familiarity, most likely due to the brevity of the assessments and the refined user interface. This would benefit from further research, exploring data completeness and a potential mixed methods approach to explore training requirements for use of the TraumaApp. [ABSTRACT FROM AUTHOR]

This study sought to identify the opinions of the Egyptian academic medical elite in the treatment of news sites for preventive medicine crises (corona vaccine model) and their assessment of this treatment and their trends towards it. The study relied on the method of media survey and it used the tool of electronic and paper questionnaire to collect data. The Egyptian academic medical elite chose the site of the seventh day with a relative weight of (61) in the front of the sites that were keen to follow it in the treatment of the Corona vaccine, and then sky news Arabic at a relative weight (57), and then the website BBC Arabic at a relative weight (56), and also chose breaking news form first, which is keen to follow it in the treatment of corona vaccine at a relative weight of (80.3), and then live broadcast at a relative weight (62), and then news reports at a relative weight (61). (48.5%) of respondents considered corona vaccine treatment on news sites to be fairly in-depth, (37.9%) felt superficial, and (13.6%) felt it was in-depth. A statistically significant correlation between the assessment of the Egyptian academic medical elite to address corona vaccine news sites and the degree of follow-up to them has been established. A statistically significant correlation between the degree of follow-up of the Egyptian academic medical elite to treat corona vaccine on news sites and their levels of confidence has also been established, while a statistically significant correlation between the elite's follow-up score for corona vaccine treatment on news sites and the effects of follow-up has not been established. [ABSTRACT FROM AUTHOR]

In this state-of-the-art review, the authors explore the recent advancements in the topics of learning curve models and their estimation methods for manual operations and processes as well as the data collection and monitoring technologies used for supporting these. This objective is achieved by answering the following three research questions: (RQ1) What calculation methods for estimating the learning curve of a worker exist in the recent scientific literature? (RQ2) What other usages are manufacturing enterprises giving to the modern learning curve prediction models according to the recent scientific literature? and (RQ3) What data collection and monitoring technologies exist to automatically acquire the data needed to create and continuously update the learning curve of an assembly operator? To do so, the PRISMA methodology for literature reviews was used, only including journal articles and conference papers referencing the topic of manual operations and processes, and to fulfil the criteria of a state-of-the-art review, only the literary corpus generated in the last five years (from 2017 to 2022) was reviewed. The scientific databases where the explorative research was carried out were Scopus and Web of Science. Such research resulted in 11 relevant journal articles and international conference papers, which were first reviewed, synthesized, and then compared. Four estimating methods were found for learning curves, and one recently developed learning curve model was found. As for the data collection and monitoring technologies, six frameworks were found and reviewed. Lastly, in the discussion, different areas of opportunity were found in the current state-of-the-art, mainly by combining the existing learning curve models and their estimation methods and feeding these with modern real-time data collection and monitoring frameworks. [ABSTRACT FROM AUTHOR]

The benefits of outdoor education are well known and irreplaceable. Teachers of environmental lessons frequently ask themselves what kind of cartographic support (paper maps or mobile navigators) to offer their students doing fieldwork either navigating to selected points or being engaged in the research of a selected environment. In this article, we compare the success rates of children using either a paper map or mobile navigation with respect to independence, accuracy and speed when walking (wayfinding) through an unfamiliar environment. We collected the data by observing 122 primary school students of six different schools as they individually walked through a suburban area of Ljubljana, Slovenia. The results show that the children were more independent and made fewer mistakes when using a mobile navigator than when using a paper map. They were able to use mobile navigation successfully after having received only a short (2-minute-long) demonstration, even if they had never used such a device before. [ABSTRACT FROM AUTHOR]

The global rise of data volume from Zettabyte to Yottabyte raises concerns about effectively managing its use and storage. One concern is dark data, which needs to be tapped and used for critical decision-making and insights generation. This phenomenon is a reality in the data economy that requires a solution through productization. The term data economy refers to the expanding economic activity centered around data collection, analysis, and sale. With the digitization of society and the exponential growth of the internet and social media, individuals, organizations, and society are continuously generating and collecting massive amounts of data. This data can be invaluable for companies and institutions to gain insights into customer behavior, market trends, and the performance of their businesses. Despite the scholarly literature that provides some insights, there remains a need for further exploration and clarification of the intersection between the data economy and productization. This study addresses these unresolved issues by thoroughly analyzing academic and industrial literature. The study contributes to the existing body of knowledge by extending the TTF (Task-Technology Fit) theory to conceptualize the relationship between data economy and productization. The study also proposes a comprehensive framework for countries, organizations, and institutions and offers theoretical and managerial implications. It is important to note that this study has its limitations, and future research should address these limitations and further advance the understanding in this research domain. [ABSTRACT FROM AUTHOR]

In this article, the authors mention guidelines for submitting manuscripts to the journal "Journal of Geoscience Education" which includes rules for data collection, data evaluation and abstract submission.

Introduction: The requirement for medical services fluctuates. This study was carried out in order to attempt to extrapolate the service requirements for various cardiology services at Mater Dei Hospital, Malta over the coming five years, based on service demands from previous years.Methods: Past annual data was obtained from hospital records for various services (to 2017). Linear regression was carried out using a bespoke Excel™ spreadsheet in order to extrapolate possible services requirements up to 2022.Results: All services are expected to increase, with forecasts ranging between 41 and 354%, depending on services being considered.Discussion: It is easy to "get on with it" and perform the work required at the workplace but this study has shown that it is equally important to anticipate demands lest lack of planning leads to long and important waiting lists for critical diagnostics and treatments. Health care provision requirements are increasing worldwide. Even using conservative estimates and in the absence of the creation of new services, the demands for extant services are likely to continue to grow. Unless medium term plans are made for hardware, software, physical space and staffing, and the funding thereof, waiting lists for investigations in this speciality are bound to rise. This may be mitigated by novel treatments but since these cannot be predicted, it would be safer and wiser to plan ahead lest we are overwhelmed. This paper has also shown how WASP (Write a Scientific Paper) precepts can be applied to elegantly study a problem and write up a paper. [ABSTRACT FROM AUTHOR]

Purpose: This study explores the everyday experiences of researchers in assessing their own and others' research, highlighting what "good" qualitative accounting research is from their perspectives. Design/methodology/approach: The analysis is based on interviews with accounting scholars from the UK, Germany, Italy, Spain and Australia, with diverse ethnic background and methodological preferences. Findings: Interviewees pointed to a plurality of practical, and to some extent tacit, ways in which they demonstrate and assess the quality of research, concerning "contribution", "consistency" and "confidence", with generalizability being seen as more controversial and difficult to attain. In general, interviewees highlighted the underlying ambiguity on what constitutes good research in the qualitative accounting community, contrasting it to the perceived stronger clarity to be found in the quantitative accounting community. This was seen as potentially strengthening the positions of "gatekeepers" in the accounting communities, and encouraging conformance and "signaling" behaviors, at the risk of hampering innovation. Originality/value: The main critical issues affecting qualitative research quality highlighted by interviewees concern the engagement with the world of practice, and with theory and literature, the importance of accounting for the analysis of qualitative data and for the messiness of the underlying process, and the implicit search for compliance with editors' and community's expectations and conventions. These findings suggest the need to continue debating how to assess the quality of qualitative research in everyday activities, and reflect on how to promote acceptance and openness to pluralism, in scientific communities, as well as in data collection, analysis, in the theorizing, and in connecting epistemology and methodology. [ABSTRACT FROM AUTHOR]

This study aimed to empirically investigate preservice teachers' learning experiences during a series of geometry-themed choreography and dance activities. These pedagogical tasks were designed to examine the challenges and solutions that participants experienced when exercising their spatial reasoning abilities, particularly during the transition between the choreography designs they had generated on a Lego-based grid worksheet and real-world dancing positions. The data collection for this study took place at an elementary school located within a bilingual metropolitan area along the southwestern United States border. The overall findings indicated that all of the participating preservice teachers' dance teams encountered interrelated challenges, most of which were variations on disorientation, primarily due to transitioning between representations of space and the deprivation of the typically employed spatial navigation reference points that are used in normal activities. [ABSTRACT FROM AUTHOR]

Background: Previous research has found that a "web-push" approach to data collection, which involves contacting people by mail to request an Internet survey response while withholding a paper response option until later in the contact process, consistently achieves lower response rates than a "paper-only" approach, whereby all respondents are contacted and requested to respond by mail.Method: An experiment was designed, as part of the Millennium Cohort Family Study, to compare response rates, sample representativeness, and cost between a web-push and a paper-only approach; each approach comprised 3 stages of mail contacts. The invited sample (n = 4,935) consisted of spouses married to U.S. Service members, who had been serving in the military between 2 and 5 years as of October, 2011.Results: The web-push methodology produced a significantly higher response rate, 32.8% compared to 27.8%. Each of the 3 stages of postal contact significantly contributed to response for both treatments with 87.1% of the web-push responses received over the Internet. The per-respondent cost of the paper-only treatment was almost 40% higher than the web-push treatment group. Analyses revealed no meaningfully significant differences between treatment groups in representation.Conclusion: These results provide evidence that a web-push methodology is more effective and less expensive than a paper-only approach among young military spouses, perhaps due to their heavy reliance on the internet, and we suggest that this approach may be more effective with the general population as they become more uniformly internet savvy. [ABSTRACT FROM AUTHOR]

[Display omitted] • Effect of scanner parameters on colorimetric detection of μPADs was evaluated. • Scanner settings, blank colour and image acquisition mode had the greatest effect. • Effect of the main μPAD characteristics on its colorimetric detection was studied. • μPAD covering (e.g., lamination) had the greatest effect. • Guidelines for optimal data acquisition and µPAD manipulation were proposed. Office style scanners are often used by researchers for the colorimetric detection in the development of microfluidic paper-based analytical devices (µPADs). However, little attention has been paid to nuances in calibration curve responses caused by varying settings of a single image-capturing device. Hence, in this study, the effect of parameters, such as the scanner operation conditions, the method of data analysis used (e.g., choice of colour space system, suitable channel), and the influence of the physical characteristics of the µPAD (e.g., template colour, type of lamination pouches used) on the colorimetric detection were evaluated for the first time. Combinations of the scanning parameters were thoroughly examined and their impact on the quality of a mock calibration curve assessed. The most sensitive calibration curve was achieved only by the selection of the optimal scanning conditions combined with an appropriate choice of colorimetric system. A flatbed scanner, used in this study, showed greater variation of signal with varying scanning setup, whereas a portable scanner provided nearly identical responses under diverse scanning conditions. Gamma correction, scanning resolution, region of interest (ROI) surrounding colour (i.e., template colour), bit-depth, image file type, and the number of analysed pixels were found not to markedly affect the dynamics of the calibration curve when colour in the ROI is homogeneous. Parameters that had an effect on the colorimetric detection were the scanner settings, colour of the blank, image acquisition mode (colour vs greyscale), and µPAD covering (e.g., lamination). Based on these findings, generic guidelines for optimal data acquisition and µPAD manipulation with respect to µPAD calibration have been formulated. [ABSTRACT FROM AUTHOR]