Search

Linear viscoelasticity (LVE), elongational rheological behavior, and foamability are examined for ionomer samples based on a commercial Surlyn sample: The Surlyn sample is dialyzed back into the parent acid copolymer and partially neutralized by sodium hydroxide to different degrees. The LVE pseudo-master curves shift to the lower frequency with an increase in the molar fraction of sodium, reflecting the increased activation energy for ionic dissociation. Incorporation of this energy into the sticky-double-reptation model gives good prediction of the LVE behavior. The degree of strain hardening under the extensional flow exhibits a non-monotonous change: the transient hardening first intensifies with increasing the ion content up to ∼50 mol%, and then weakens upon further increasing the ion content. The foamability of these samples in supercritical CO 2 appears to be controlled by the flowability as well as the melt strength during the elongational flow. In particular, the foaming T window widens greatly when the strain-hardening has been strengthened by the physical network based on the ionic interaction. [Display omitted] • The activation energy for ion dissociation increases with a degree of neutralization for Surlyn-based ionomers. • The linear viscoelasticity is well predicted by the sticky-double-reptation model. • There is an optimized degree of neutralization in promoting the strain-hardening under the elongational flow. • The foaming window widens when the strain-hardening becomes stronger. [ABSTRACT FROM AUTHOR]

Abstract: The flame retardancy of bisphenol A polycarbonate (PC) containing potassium diphenylsulfone sulfonate (KSS), poly(aminopropyl/phenylsilsesquioxane) (PAPSQ) and poly(vinylidenefluoride) (PVDF) was measured by limited oxygen index (LOI) and examined according to UL94. A high LOI and UL94 V-0 rating for 1.6mm thickness samples were obtained by a combined use of equivalent KSS, PAPSQ and PVDF at 0.1–0.3wt% loading, respectively. The improvement in flame retardancy of PC compositions arose from the synergistic interaction of three additives. Thermogravimetric analysis (TGA) indicated that the combination decreased the activation energy (E) of PC degradation and elevated the thermal degradation rate of PC to ensure the formation of an insulating carbon layer. FTIR analysis showed that the LOI char of PC containing the three additives took on a highly cross-linking aromatic ester and ether structure. [Copyright &y& Elsevier]