Search

This paper reports a novel additive manufacturing technique for MEMS devices using newly developed APSLD (atmospheric pressure sputtering layer deposition) technology. It uses a microplasma at atmospheric pressure to deposit microstructures with defined properties, such as conducting or isolating directly at different surfaces additively without complex and time‐consuming manufacturing routes like planar technology. Feasibility tests have been successfully done to deposit metal lines, isolating and metal oxide layers on 3D surfaces to manufacture high stable MEMS sensor system for harsh environments. This is a promising technology in the field of MEMS manufacturing, as it can simplify the manufacturing process and reduce the cost. The ability to deposit different materials can expand the design possibilities for MEMS devices. © 2024 Institute of Electrical Engineer of Japan and Wiley Periodicals LLC. [ABSTRACT FROM AUTHOR]

High entropy alloys (HEAs) have been developed as a new class of structural materials that consist of multicomponent elements with an approximately equiatomic ratio for increasing the mixing entropy to stabilize the solid solution phase. HEA for biomedical applications (BioHEA) was first developed in Japan; HEA comprising nonbiotoxic elements was specifically designed, demonstrating excellent mechanical properties and biocompatibility. However, elemental segregation, often observed in BioHEAs, hinders the inherent functions derived from high entropy effects and solid solution hardening. In this review article, elemental homogenization and functionalization of BioHEAs utilized by ultra-rapid cooling via laser-powder bed fusion and the characteristics of these BioHEAs, especially focusing on their excellent properties for biomedical applications, are introduced. [ABSTRACT FROM AUTHOR]

The study and development of the technological foundations for creating a textured surface using an electrode tool obtained by the method of additive manufacturing are the purpose of the work. Methods for obtaining textured surfaces and for creating a tool electrode for electrical discharge machining are considered in this work. The modeling of the electrodetool, analysis of internal stresses during its manufacture by the selective laser melting method, and the manufacture of electrodes are considered. A Realizer SLM 50 laser machine was used to create the electrode tool. Ti6Al4V metal powder with an average particle size of 30 µm was chosen as the material for manufacturing. The experiments were carried out on a copy-piercing electrical discharge Smart CNC machine. The material of the workpiece is corrosion-resistant, heat-resistant, high-alloy steel 15Cr12H2MoWVNNB. An Olympus GX 51 light microscope (Olympus Corporation, Shinjuku-ku, Japan) at 100× magnification was used to visually evaluate the texturing results and measure dimensions. The possibility of using electrodes obtained by the selective laser melting method for texturing surfaces was studied. [ABSTRACT FROM AUTHOR]