Search

Novel adsorbents, poly([2-(methacryloxy)ethyl]trimethylammonium chloride) modified magnetic chitosan particles (DMCPs), were synthesized via free radical polymerization and applied to adsorb Cr(VI) from aqueous solution. The effects of pH (2–11), Cr(VI) concentration (10–200 mg/L) and contact time (0–420 min) on the adsorption performance were evaluated. The results showed that the adsorption capacity of DMCPs was much larger than that of magnetic chitosan particles (MCPs) in the examined pH range and decreased with Cl − concentration increasing, indicating that electrostatic interaction and ion exchange are the governing mechanisms of Cr(VI) adsorption by DMCPs. The Langmuir isotherm model and pseudo-second-order kinetic model fitted the experimental data well. The maximum adsorption capacity of DMCPs is 153.85 mg/g. Besides, Cr(VI)-loaded DMCPs could be easily separated and efficiently regenerated. Therefore, DMCPs are promising candidates for Cr(VI) adsorption owing to their excellent performance in a wide pH range, easy separation and good reusability. [ABSTRACT FROM AUTHOR]

A novel chitosan-based magnetic adsorbent [poly(2-acrylamido-2-methylpropane sulfonic acid) grafted magnetic chitosan microspheres, PMCMs] was successfully fabricated via free radical polymerization for effectively removing the cationic dye methylene blue (MB). The effects of initial solution pH (1.0–10.0), temperature (30–50 °C), contact time (0–660 min) and initial concentration (50–1600 mg/L) were studied. The results indicated that the adsorption capacity increased with the increasing of initial solution pH and temperature. The adsorption kinetic and adsorption equilibrium data fitted closely to the pseudo-second-order kinetic model and Langmuir isotherm model respectively, confirming monolayer adsorption. The maximum adsorption capacity of PMCMs for MB at initial solution 9.0 were 1000, 1250 and 1428 mg/g at 30, 40 and 50 °C, respectively. Furthermore, the magnetic microspheres could be easily separated using a magnet and effectively regenerated after finishing the treatment process. Therefore, PMCMs are promising candidates for the removal of dye from wastewater. [ABSTRACT FROM AUTHOR]

In this work, a novel chitosan-based magnetic adsorbent [poly(2-(dimethylamino)ethyl methacrylate) grafted magnetic chitosan microspheres, GMCMs] was synthesized by graft polymerization of (2-(dimethylamino)ethyl methacrylate on the surface of magnetic chitosan microspheres (MCMs). The as-prepared GMCMs exhibited significantly enhanced adsorption capacity towards anionic dyes (e.g., Acid Green 25 and Reactive Blue 19) compared with MCMs. It is due to the fact that the abundant tertiary amine groups of the grafted polymer protonated at low pH and the polymer chains stretched as a result of electrostatic repulsions and chain-solvent interactions. The stretched polymer chains provided a variety of adsorption sites, which efficiently adsorbed dyes through electrostatic interactions and hydrogen bonding. While, in alkaline conditions, the tertiary amine groups were deprotonated and the polymer chains collapsed due to hydrophobic interactions, which facilitated the regeneration of the dye-loaded GMCMs at high pH. The regenerated GMCMs showed excellent adsorption performance even after five adsorption–desorption cycles. Besides, the GMCMs could be rapidly separated from aqueous solutions under an external magnetic field. Therefore, the GMCMs materials bear great application potentials in water treatment owing to its high adsorption capacity, pH-responsiveness, facile regeneration and good reusability. [ABSTRACT FROM AUTHOR]

• Multifunctional magnetic composite nanoparticles were facilely prepared. • The as-prepared FS@CS-PAA showed excellent adsorption capacities for cationic dyes. • FS@CS-PAA exhibited satisfactory removal rates for metal ions in a wide pH range. • The good adsorption ability was attributed to abundant active sites from CS-PAA. • FS@CS-PAA's good stability and reusability facilitated its practical application. Wastewater containing highly toxic, non-biodegradable and carcinogenic organic dyes and metal ions has been regarded as a severe threat to ecological environment and human health. Thus, it is of great significance to develop an effective approach to purify this kind of wastewater. Herein, novel magnetic adsorbent FS@CS-PAA was facilely prepared by coating anionic polyacrylamide-modified chitosan (CS-PAA) on the surface of silica-combined Fe 3 O 4 (FS). The morphology, structure, physic-chemical and magnetic properties of as-prepared FS@CS-PAA were fully characterized by various characterization techniques. Its adsorption behaviors towards cationic dyes and metal ions were systematically investigated in single systems, binary systems, and model wastewater. FS@CS-PAA was proved to have superior adsorption capacities of 2330.17 and 1044.06 mg g−1 respectively for crystal violet and methylene blue at 318.15 K, much higher than other reported adsorbents. Besides, FS@CS-PAA exhibited a pH-independent adsorption capability for metal ions, as demonstrated in single systems and in metal ion-dye binary systems, thus it could be used to treat a variety of metal ion wastewaters with different pH values. Moreover, FS@CS-PAA could be effectively and easily regenerated by HCl solution after the treatments of both synthetic wastewater and model wastewater. As revealed in FTIR and XPS analyses, the adsorption mechanism was mainly attributed to the electrostatic interaction, hydrogen bonding, cation exchange and chelating effect. With its excellent adsorption capacity for cationic dyes, pH-independent adsorption capability for metal ions, easy separation ability, satisfactory stability and good reusability, FS@CS-PAA can become an ideal candidate for wastewater treatment. [ABSTRACT FROM AUTHOR]

• Magnetic biosorbents (PMCCs) were designed and fabricated by radical polymerization. • PMCCs had specific morphological and molecular structure for ciprofloxacin removal. • PMCCs exhibited excellent adsorption capacity of 527.93 mg·g−1 for ciprofloxacin. • The adsorption mechanisms of ciprofloxacin by PMCCs were systematically elucidated. • PMCCs displayed rapid separation and favorable reusability. Magnetic biosorbents with specific morphological and molecular structure (PMCCs) were designed for the removal of ciprofloxacin (CIP) from water. Radical polymerization method was applied to immobilize the designed polymer brushes onto core-shell shaped magnetic microspheres to fabricate PMCCs. PMCCs exhibited a maximum adsorption capacity of 527.93 mg·g−1, which is much higher than reported adsorbents, owing to the complete stretch of polymer brushes and increased active sites as well as enhanced interaction. The investigation on the adsorption behavior of PMCCs for CIP manifested that CIP adsorption well fitted the Langmuir isotherm model and pseudo-second-order kinetic model. The calculated thermodynamic parameters suggested that CIP adsorption onto PMCCs was spontaneous and exothermic. Further recycling experiments showed a loss of less than 20% in the CIP adsorption capacity after five times, demonstrating the reusability of the as-designed biosorbents. [ABSTRACT FROM AUTHOR]

Wastewater containing dyes poses a severe threat to human health and to environmental safety. Hence, finding an effective way to treat this wastewater has attracted wide attentions. In this study, quaternary ammonium group-rich magnetic nanoparticles (MNPs), Fe 3 O 4 @SiO 2 -MPS-g-DAC (FSMD), were facilely prepared by grafting polymerization and served as a cationic adsorbent to remove anionic dye Orange G from aqueous solutions. Being compared with Fe 3 O 4 @SiO 2 -MPS MNPs, the adsorption capacity of FSMD MNPs was notably enhanced and it could be maintained in a high level under a wide solution pH range. The dependency on pH and the sensitivity to ionic strength indicated that the main adsorption mechanism was the electrostatic interaction. The adsorption kinetics followed the pseudo-second-order model, and the adsorption isotherms were well described with the Langmuir model. According to the thermodynamic analysis, the adsorption process was spontaneous and endothermic. FSMD MNPs were proved to have advantages of fast adsorption rate, high adsorption capacity, easy separation ability under external magnetic field, and satisfactory reusability, therefore they can be applied in the removal of anionic dyes from wastewater. [ABSTRACT FROM AUTHOR]

With the rapidly increased discharges of various complex dyeing wastewaters, adsorbents are required to own more properties such as cost-effectiveness, amphoteric ability, and rapid solid-liquid separation ability, to treat dyeing wastewaters. A multi-functional adsorbent was synthesized by co-grafting m-phenylenediamine and sodium allyl sulfonate on the surface of a low-cost base-material: hollow glass microsphere (HGM). Characterization results indicated the surface roughness and –Si–OH groups of HGM were increased by NaOH corrosion; functional groups such as aromatic-rings, –NH 2 , and –HSO 3 − were grafted on the surface of HGM. The synthesized adsorbent showed amphoteric attraction abilities for anionic acid green 25 and cationic basic fuchsin dyes. Kinetics and isotherms studies suggested the PSO model and Langmuir model were most satisfactory for adsorption processes, the theoretical maximum adsorption capacities for acid green 25 and basic fuchsin reached 454.55 and 588.24 mg g−1, respectively. The mechanism investigations indicated the electrostatic attraction, π-π stacking, and hydrogen bonds were the potential interaction forces between dyes and adsorbents. The synthesized material owns self-floating ability due to the hollow structure of HGM, over 95.7% of adsorbents were collected at water surface via the self-floating process in 12 min, which was beneficial to the solid-liquid separation process and the reuse of adsorbents. The technologies developed by these research efforts can serve as templates for synthesizing multi-functional adsorbents for complex wastewaters decontaminations. [Display omitted] • First demonstration of an amphoteric self-floating adsorbent. • The adsorption capacities of anionic/cationic dyes reached 454.55/588.24 mg g−1. • Electrostatic force, π-π stacking, hydrogen bond were dominant adsorption mechanisms. • Over 95.7% of adsorbents were collected at the water surface within 12 min. • The multi-functional adsorbent is beneficial for cleaner production of dyeing goods. [ABSTRACT FROM AUTHOR]

[Display omitted] • Self-floating cyclodextrin-modified polymer was prepared. • The adsorption performance of TFCD and FTFCD was compared. • FTFCD simplified the recycling process by wrapping a hollow glass microsphere. • Porous structure and hydrophobic cavity favor the dye adsorption. • Polymers exhibited excellent selectivity toward cationic dyes. The separation and recycling processes of current cyclodextrin (CD)-based adsorbents are complicated. Thus, a novel composite based on a large surface area, porous, and self-floating tetrafluoroterephthalonitrile (TFN)-crosslinked CD polymer (FTFCD), was fabricated, characterized and applied to treat cationic dye pollutants. The characterization showed a porosity, good thermal stability, a stable crystal structure, and abundant functional groups on the prepared FTFCD, which had demonstrated great improvement on its adsorption capacity towards attention grabbing pollutants. The removal efficiency of the adsorbents for malachite green (MG) remained above 95% at pH 1 ∼ 10. In addition, the adsorbents were found to rapidly reach equilibrium governed by the pseudo-second-order kinetic model, and the maximum adsorption capacity of FTFCD was 1390.263 mg/g, as corroborated by the Langmuir isotherm model. While the phenolate groups of FTFCD found to electrostatically interacts with the MG strong cationic quaternary amine group, hydrogen-bonding was responsible for the hydroxyl group of FTFCD and the quaternary amine group binding. Meanwhile, the triangular cone configuration of MG makes it easy to be entrapped and absorbed in the hydrophobic cavity. Besides, after regeneration of exhausted FTFCD for five successive cycles, the MG removal efficiency still reached more than 80%. Thus, FTFCD could be applied as a potential alternative adsorbent for cationic dye removal owing to its excellent adsorption performance, convenient recycling, wide pH application, and environmental friendliness. [ABSTRACT FROM AUTHOR]