Search

Abstract: Application of microemulsion modified raw date pits as an inexpensive solid extractant for removing methylene blue (MB), copper ion (Cu2+) and cadmium ion (Cd2+) has been presented. The results summarised herein are also part of an investigation conducted to evaluate the adsorption capacity by taking into consideration the experimental parameters such as pH, particle size and initial solute concentration. The experimental data obtained from the adsorption isotherms studies were used to find pollutants distribution factors and modelled using both Langmuir and Freundlich equations. The modified adsorbent was more effective toward all pollutants with high removal capacities (50–350 mg/g) and with very large distribution values (9–235 L/g) which indicates the suitability of this new material for extraction organic and inorganic pollutants. After microemulsion modification, the FTIR scans of the samples show clear differences in the position and intensity the characteristics bands of the raw date pits (RDP). Three mechanisms of the MB, Cu2+ and Cd2+ adsorption onto μE-MDP are possible: (i) adsorption by an electrostatic force of the anionic head group of the surfactant and the positive charge of the dye (MB+) or the metal ions (Cu2+ or Cd2+), (ii) adsorption by tail groups of the surfactant and the hydrophobic character of the MB molecules. The MB is a basic dye and has basic characteristics and therefore is expected to interact strongly with the anionic head groups of the surfactants (RCOO–). In the contrary, the Cu2+ and Cd2+ ions are not expected to interact by the tail groups of the surfactant where the ionic radii of these ions may explain the differences between Cu2+ (0.72 Å) and Cd2+ (0.99 Å) adsorption capacities and (iii) filling the channel (pores) of the RDP by dissolving in the microemulsion micelles. [Copyright &y& Elsevier]

Computerised flow injection coupled with potentiometric stripping analysis (FIPSA) was employed for examination of the adsorption behaviour of Pb(II), Cd(II) and Zn(II) ions onto diatomite modified with manganese oxides. Signal optimisation was undertaken with respect to flow rate, deposition time, deposition potential, oxidising agent concentration, thickness of mercury film, solution pH and metal ion concentration. Examination of the column adsorption characteristics was facilitated by introduction of an adsorption microcolumn, as a complementary component of the flow injection system. The resulting breakthrough curves were employed to calculate parameters including adsorption capacity and adsorption rate constant, taking into consideration initial ion concentration, flow rate, mass and particle size of adsorbent, and column internal diameter. Adsorption capacities, determined using the Thomas mathematical model, showed that manganese modified Jordanian diatomite had an efficiency towards the removal of heavy metal ions from aqueous solutions; Cd(II)>Zn(II)≉Pb(II). The relative adsorption rates of the ions followed the order: Pb(II)>Zn(II)≉Cd(II). [Copyright &y& Elsevier]