Search

In studies assessing sorption of hydrophobic organic compounds (HOCs) in natural systems, the choice of an appropriate reference black carbon, which can represent environmental black carbon (BC), is essential. This study compared isotherms of two commonly available and distinct reference BCs (n-hexane soot (BCRM) and diesel particulate matter (SRM 2975)) and a natural sediment from a source with little black carbon (Lake Hartwell, SC) using 3,3',4-trichlorobiphenyl (IUPAC #35) as a model sorbate. There was greater sorptivity for PCB-35 by BCRM than by SRM 2975. The observed differences in sorption between the two reference black carbons for PCB-35 may be ascribed to the different chemical characteristics of the black carbons. Differences in pore volume distribution at16A pore width are less likely to be responsible for the observed differences in sorption. The elemental analysis confirmed that BCRM was a pure n-hexane soot because only C, H and O were measured. In contrast, SRM 2975 also contained N and S and a higher O% than BCRM. Compared to the low BC sediment, the two reference BCs had greater pore volume distributions, surface areas, total pore volumes and sorption. The observed nF (i.e., Freundlich exponent) values for PCB indicated greater linearity of the isotherms for the natural sediment than for the reference black carbons. For designing studies of sorption of HOCs in natural systems, in particular, when PCBs are contaminants of concern, results of this study can aid selection of the appropriate reference BCs.

An estimated 330 metric tons of U are buried in the radioactive waste Subsurface Disposal Area (SDA) at the Idaho National Engineering and Environmental Laboratory (INEEL). An assessment of U transport parameters is being performed to decrease the uncertainty in risk and dose predictions derived from computer simulations of U fate and transport to the underlying Snake River Plain Aquifer. Uranium adsorption isotherms were measured for 14 sediment samples collected from sedimentary interbeds underlying the SDA. The adsorption data were fit with a Freundlich isotherm. The Freundlich n parameter is statistically identical for all 14 sediment samples and the Freundlich K f parameter is correlated to sediment surface area ( r 2 =0.80). These findings suggest an efficient approach to material characterization and implementation of a spatially variable reactive transport model that requires only the measurement of sediment surface area. To expand the potential applicability of the measured isotherms, a model is derived from the empirical observations by incorporating concepts from surface complexation theory to account for the effects of solution chemistry. The resulting model is then used to predict the range of adsorption conditions to be expected in the vadose zone at the SDA based on the range in measured pore water chemistry. Adsorption in the deep vadose zone is predicted to be stronger than in near-surface sediments because the total dissolved carbonate decreases with depth.

Over the last fifteen years the Savannah River Site (SRS) in South Carolina, USA, was selected as the site of three new plutonium facilities: the Mixed Oxide Fuel Fabrication Facility, Pit Disassembly and Conversion Facility, and the Pu Immobilization Plant. In order to assess the potential human and environmental risk associated with these recent initiatives, improved understanding of the fate and transport of Pu in the SRS subsurface environment is necessary. The hypothesis of this study was that the more mobile forms of Pu, Pu(V) and Pu(VI), would be reduced to the less mobile Pu(III/IV) oxidation states under ambient SRS subsurface conditions. Laboratory-scale dynamic flow experiments (i.e., column studies) indicated that Pu(V) was very mobile in SRS sediments. At higher pH values the mobility of Pu decreased and the fraction of Pu that became irreversibly sorbed to the sediment increased, albeit, only slightly. Conversely, these column experiments showed that Pu(IV) was essentially immobile and was largely irreversibly sorbed to the sediment. More than 100 batch sorption experiments were also conducted with four end-member sediments, i.e., sediments that include the chemical, textural, and mineralogical properties likely to exist in the SRS. These tests were conducted as a function of initial Pu oxidation state, pH, and contact time and consistently demonstrated that although Pu(V) sorbed initially quite weakly to sediments, it slowly, over the course of

Aqueous Pu concentrations and oxidation state transformations as a function of pH were quantified and compared between sorption/desorption studies and literature solubility values. When Pu(V) was added to a red subsurface sandy-clay-loam sediment collected near Aiken, South Carolina, 99% of the Pu sorbed to the sediment within 48 h. Throughout the study,or = 94% of the Puaq remained as Pu(V), whereasor = 6% was Pu(VI) andor = 1% was Pu(IV). This is in stark contrast to the sorbed Pu which was almost exclusively in the +4 oxidation state. The fraction of aqueous Pu (Puaq/Pusolid) decreased by2 orders-of-magnitude when the contact time was increased from 1- to 33-days, presumably the result of Pu(V) reduction to Pu(IV). The desorption studies were conducted with a sediment that had been in contact with Pu (originally as PuIV(NO3)4) for 24 years. At near neutral pH, a decrease of 1-pH unit resulted in almost an order-of-magnitude increase in the concentration of Puaq (7.5 x 10(-10) M at pH 7 and 3.6 x 10(-9) M at pH 6). Similar to the sorption experiment,or = 96% of the Puaq was Pu(V/VI). The Puaq concentrations from the desorption experiment were similar to those of the Pu(V) amended sorption studies that were permitted to equilibrate for 33 days, suggesting that the latter had reached steady state. The Puaq concentrations as a function of pH followed near identical trends with literature solubility values for PuO2(am), except that the desorption values were lower by a fixed amount, suggesting either Pu sorption was occurring in this sediment system or that a more crystalline, less soluble form of Pu existed in the sediment than in the literature water-PuO2(am) system. Based on Pu sorption experiments and measured sediment surface charge properties as a function of pH, the latter explanation appears more likely. pH had a more pronounced effect on solubility and Puaq concentrations than on sediment charge density (or Puaq oxidation state distribution). Slight changes in system pH can have a large impact on Pu solubility and the tendency of Pu to sorb to sediment, thereby influencing Pu subsurface mobility.

Changes in aqueous- and solid-phase plutonium oxidation state were monitored over time in hematite (alpha-Fe2O3) and goethite (alpha-FeOOH) suspensions containing 239Pu(V)-amended 0.01 M NaCl. Solid-phase oxidation state distribution was quantified by leaching plutonium into the aqueous phase and applying an ultrafiltration/solvent extraction technique. The technique was verified using oxidation state analogues of plutonium and sediment-free controls of known Pu oxidation state. Batch kinetic experiments were conducted at hematite and goethite concentrations between 10 and 500 m2 L(-1) in the pH range of 3-8. Surface-mediated reduction of Pu(V) was observed for both minerals at pH values of 4.5 and greater. At pH 3 no adsorption of Pu(V) was observed on either goethite or hematite; consequently, no reduction was observed. For hematite, adsorption of Pu(V) was the rate-limiting step in the adsorption/reduction process. In the pH range of 5-8, the overall removal of Pu(V) from the system (solid and aqueous phases) was found to be approximately second order with respect to hematite concentration and of order -0.39 with respect to the hydrogen ion concentration. The overall reaction rate constant (k(rxn)), including both adsorption and reduction of Pu(V), was 1.75+/-2.05 x 10(-10) (m(-2) L)(-2.08) (mol(-1) L)(-0.39) (s(-1)). In contrast to hematite, Pu(V) adsorption to goethite occurred rapidly relative to reduction. At a given pH,the reduction rate was approximately independent of the goethite concentration, although the hydrogen ion concentration (pH) had only a slight effect on the overall reaction rate. For goethite, the overall reaction rates at pH 5 and pH 8 were 6.0 x 10(-5) and 1.5 x 10(-4) s(-1), respectively. For hematite, the reaction rate increased by 3 orders of magnitude across the same pH range.

Changes in aqueous- and solid-phase Pu oxidation state were monitored over time in magnetite (Fe3O4) suspensions containing 239Pu(V)-amended 0.01 M NaCl. Oxidation state distribution was determined by leaching of Pu into an aqueous phase followed by an ultrafiltration/solvent extraction technique. The capability of the technique to measure Pu oxidation state distribution was verified using 230Th(IV), 237Np(V), and 233U(VI) as oxidation state analogues. Reduction of Pu(V) was observed at all pH values (pH 3 to 8) and magnetite concentrations (10 to 100 m2 L(-1)). In the pH range 5 to 8, adsorption was a rate-limiting step, and reduction was mediated by the solid phase; at pH 3 reduction occurred in the aqueous phase. The overall reaction (describing both adsorption and reduction of Pu(V)) was found to be approximately first order with respect to the magnetite concentration and of order -0.34+/-0.02 with respect to the hydrogen ion concentration. Assuming first order dependence with respect to Pu, the overall reaction rate constant was calculated as k(rxn) = 4.79+/-0.62 x 10(-8) (m(-2) L)0.99(mol(-1) L)-0.34(s(-1)). The Pu(IV) solid-phase species became more stable over time.

Lake sediments contaminated with polychlorinated biphenyls (PCBs) were purged using a gas stripping technique to estimate desorption rate constants. Desorption profiles and modeling of the data clearly show a two-step release of PCBs from sediment suspensions that can be described as a labile (fast) release followed by a non-labile (slow) release. Data are summarized by labile and non-labile rate constants and by mass in each phase as a function of suspended solids concentration for twelve pure congeners and nine co-eluting data sets (twenty-one chromatograph peaks total). Labile desorption rate constants range from 113 days(-1) to 1.43 days(-1) for the 100 mg/l sediment suspension, from 67.7 days(-1) to 2.45 days(-1) for the 1000 mg/l sediment suspension, and from 8.41 days(-1) to 0.946 days(-1) for the 5000 mg/l sediment suspension. Labile rate constants consistently decreased with increasing suspended solids, and, in general, decreased with increasing degree of chlorination (reflected in increasing retention time in the chromatogram). No consistent trend was observed for the non-labile rate constants with suspended solids concentration or degree of chlorination. The average non-labile rate constant for the PCB congeners studied here was 0.154 days(-1) (s.d.=0.158; n=63). The distribution between the labile and non-labile phases also failed to indicate dependence on suspended solids concentration, chlorine substitution pattern, or molecular weight of the congener, although the data from the 5000 mg/l suspension consistently contained less labile components. The average distributions (n=63) were 60.1% in the labile phase and 39.9% in the non-labile phase.

Sorption of alpha-endosulfan by kaolinite and montmorillonite alone and in the presence of sorbed and dissolved humic acid (HA) was investigated (pH 8 and 25 degrees C). Three types of HA, Elliot soil HA (EHA), Peat HA (PHA), and Summit Hill HA (SHHA), were used to represent typical humic substances found in soils. For sorption of HA by either mineral, Freundlich sorption coefficient (K(f)) values appeared to decrease in the order of EHA > PHA > SHHA, which followed increasing polarity (expressed as the O/C atomic ratio) and decreasing percent-carbon content. For both clays, sorption of alpha-endosulfan by the HA mineral complex was greater than for sorption by the clay alone. Sorption of alpha-endosulfan by the HA mineral complexes followed the same order as the K(f) of the HAs (EHA > PHA > SHHA). Based on the amount of HA adsorbed by each mineral, organic carbon partition coefficients (K(oc)) were determined for sorption of alpha-endosulfan by two of the HA mineral complexes. The value of K(oc) for alpha-endosulfan sorption was greater for kaolinite EHA than kaolinite SHHA. However, the opposite trend was found with the montmorillonite HA complexes. Montmorillonite appeared to sorb alpha-endosulfan and/or HA with higher affinity than kaolinite, which likely is due to its 2:1 layer structure and higher surface area. Sorption of endosulfan diol, a hydrolysis product, by the minerals was much less than the parent pesticide.