Search

Magnetic separation technology is an efficient and feasible way to achieve rapid recovery of adsorbents, thus, the use of magnetic adsorbents has attracted the attention of many researchers. However, currently reported magnetic adsorbents have limited adsorption capacity due to insufficient adsorption sites and reactive groups. In this work, a novel magnetic chitosan-based amphiphilic adsorbent (PFSC) was synthesized by using UV-light irradiation method to combine with acryloyloxyethyl dimethylbenzyl ammonium chloride (AO), a molecule containing benzyl groups. PFSC and its precursors were carefully characterized, and their adsorption performances for the removal of anionic dyes were explored. The characterization results showed that the magnetic copolymers with a type of microsphere structure were successfully synthesized. Moreover, PFSC exhibited superior adsorption efficiency and pH resistance compared to those of an unmodified chitosan-based magnetic adsorbent (FSC). The maximum adsorption capacities of PFSC towards orange II (OG), acid red 88 (AE) and red amaranth (RM) were 955.0, 1075.8 and 567.5 mg/g at pH 3.0, respectively. The adsorption kinetics and isotherms of PFSC were consistent with that of a pseudo-second order kinetic model and the Langmuir isotherm model. In addition, adsorption-desorption experiments showed that PFSC could be rapidly separated and efficiently recycled even after 4 uses. More importantly, the FTIR and XPS results revealed that electrostatic adsorption and π-π stacking interactions were the main adsorption mechanisms for the PFSC-enhanced removal of anionic dyes. [Display omitted] • The chitosan-based amphiphilic magnetic copolymer was successfully synthesized by the UV-light initiated method. • The novel magnetic copolymer can be easily separated from solution by magnetic force. • The enhanced electrostatic adsorption and π-π stacking effect played an important role in the removal of anionic dyes. • The novel magnetic copolymer can be reused by simple acid-alkali adjustment. [ABSTRACT FROM AUTHOR]

• Self-floating adsorbents can reach surface solid-liquid separation spontaneously. • The two-step synthesis process of SFA is simple and efficient. • Single-layer grafting allows the adsorption to reach equilibrium within 10 min. • Concentrate low concentration dyes to industrially usable levels by desorb method. In the case of a sharp increase in the price of dyes, the dyes concentration of in wastewater is important for environmental protection and industrial costs reduction. In this study, we grafted single-layer amino groups onto the surface of the hollow glass microspheres by a two-step simple synthesis, and the anionic dyes adsorption process reaches equilibrium within 10 min. The as-synthesized adsorbent has self-floating ability to achieve high-efficiency surface solid-liquid separation with water. SEM, EDS, S BET , FT-IR, XPS, TGA characterizations results demonstrated the successful grafting of amino groups and the important role of the pretreatment process in the two-step synthesis. The results of adsorption isotherms and kinetics show the adsorption process belongs to single-layer adsorption with equal adsorption sites, and the adsorption capacities for acid orange 7 and amaranth reach 428.99 mg g−1 and 145.62 mg g−1, respectively. Regeneration of the adsorbent and concentration of the dye solutions can be achieved by dispersing the separated adsorbent in alkaline solution, the maximum concentrated concentration of acid orange 7 and amaranth was 6321.57 mg L−1 and 2431.84 mg L−1, respectively. This study provides new insights for the solid-liquid separation of water treatment agents and the resource regenerating of dyeing wastewater. [ABSTRACT FROM AUTHOR]

Wastewater containing dyes poses a severe threat to human health and to environmental safety. Hence, finding an effective way to treat this wastewater has attracted wide attentions. In this study, quaternary ammonium group-rich magnetic nanoparticles (MNPs), Fe 3 O 4 @SiO 2 -MPS-g-DAC (FSMD), were facilely prepared by grafting polymerization and served as a cationic adsorbent to remove anionic dye Orange G from aqueous solutions. Being compared with Fe 3 O 4 @SiO 2 -MPS MNPs, the adsorption capacity of FSMD MNPs was notably enhanced and it could be maintained in a high level under a wide solution pH range. The dependency on pH and the sensitivity to ionic strength indicated that the main adsorption mechanism was the electrostatic interaction. The adsorption kinetics followed the pseudo-second-order model, and the adsorption isotherms were well described with the Langmuir model. According to the thermodynamic analysis, the adsorption process was spontaneous and endothermic. FSMD MNPs were proved to have advantages of fast adsorption rate, high adsorption capacity, easy separation ability under external magnetic field, and satisfactory reusability, therefore they can be applied in the removal of anionic dyes from wastewater. [ABSTRACT FROM AUTHOR]

[Display omitted] • Self-floating cyclodextrin-modified polymer was prepared. • The adsorption performance of TFCD and FTFCD was compared. • FTFCD simplified the recycling process by wrapping a hollow glass microsphere. • Porous structure and hydrophobic cavity favor the dye adsorption. • Polymers exhibited excellent selectivity toward cationic dyes. The separation and recycling processes of current cyclodextrin (CD)-based adsorbents are complicated. Thus, a novel composite based on a large surface area, porous, and self-floating tetrafluoroterephthalonitrile (TFN)-crosslinked CD polymer (FTFCD), was fabricated, characterized and applied to treat cationic dye pollutants. The characterization showed a porosity, good thermal stability, a stable crystal structure, and abundant functional groups on the prepared FTFCD, which had demonstrated great improvement on its adsorption capacity towards attention grabbing pollutants. The removal efficiency of the adsorbents for malachite green (MG) remained above 95% at pH 1 ∼ 10. In addition, the adsorbents were found to rapidly reach equilibrium governed by the pseudo-second-order kinetic model, and the maximum adsorption capacity of FTFCD was 1390.263 mg/g, as corroborated by the Langmuir isotherm model. While the phenolate groups of FTFCD found to electrostatically interacts with the MG strong cationic quaternary amine group, hydrogen-bonding was responsible for the hydroxyl group of FTFCD and the quaternary amine group binding. Meanwhile, the triangular cone configuration of MG makes it easy to be entrapped and absorbed in the hydrophobic cavity. Besides, after regeneration of exhausted FTFCD for five successive cycles, the MG removal efficiency still reached more than 80%. Thus, FTFCD could be applied as a potential alternative adsorbent for cationic dye removal owing to its excellent adsorption performance, convenient recycling, wide pH application, and environmental friendliness. [ABSTRACT FROM AUTHOR]