Search

A novel chitosan-based magnetic adsorbent [poly(2-acrylamido-2-methylpropane sulfonic acid) grafted magnetic chitosan microspheres, PMCMs] was successfully fabricated via free radical polymerization for effectively removing the cationic dye methylene blue (MB). The effects of initial solution pH (1.0–10.0), temperature (30–50 °C), contact time (0–660 min) and initial concentration (50–1600 mg/L) were studied. The results indicated that the adsorption capacity increased with the increasing of initial solution pH and temperature. The adsorption kinetic and adsorption equilibrium data fitted closely to the pseudo-second-order kinetic model and Langmuir isotherm model respectively, confirming monolayer adsorption. The maximum adsorption capacity of PMCMs for MB at initial solution 9.0 were 1000, 1250 and 1428 mg/g at 30, 40 and 50 °C, respectively. Furthermore, the magnetic microspheres could be easily separated using a magnet and effectively regenerated after finishing the treatment process. Therefore, PMCMs are promising candidates for the removal of dye from wastewater. [ABSTRACT FROM AUTHOR]

[Display omitted] • The magnetic nanoadsorbent with specific core-shell structure was synthesized. • Fe 3 O 4 @Carbon@ZIF-8 showed excellent adsorption capacities for Congo red and Cu(II). • The good adsorption ability was attributed to abundant active sites from ZIF-8. • Fe 3 O 4 @Carbon@ZIF-8 can selectively remove CR and Cu(II) from complex wastewater. • Nanoadsorbent's good stability and reusability indicated its practical application. Efficient and convenient removal of organic dyes and heavy metals from complex wastewater is still a challenge for human health and ecosystem remediation. Novel adsorbent, Fe 3 O 4 @Carbon@ZIF-8 with specific core-shell structure was synthesized by layer-by-layer self-assembly. The hydrophilic carbonaceous shell acts as both a linker and stabilizer between Fe 3 O 4 and ZIF-8. The characteristics of self-made adsorbent were comprehensively identified by numerous characterization methods. The adsorption kinetics, isotherms and the influence of various reacting parameters on its adsorption capacity of Congo red (CR) and Cu(II) were systematically investigated. Compared with other reported adsorbents, the maximum adsorption capacities of Fe 3 O 4 @Carbon@ZIF-8 towards CR (806.45 mg g−1) and Cu(II) (234.74 mg g−1) were much higher. Moreover, the adsorption process followed pseudo-second-order kinetics and Langmuir isotherm models. Selective adsorption of CR was investigated in the presence of cationic and anionic dyes, and the same as Cu(II) in the existence of competitive ions, which revealed that it was appropriate for selective adsorption toward CR and Cu(II) in complex wastewater. On the basis of FT-IR and XPS analyses, electrostatic interaction, hydrogen bonding, π-π bonding and ion exchange were involved in the mechanism of adsorption. Fe 3 O 4 @Carbon@ZIF-8 is suitable for practical application because of its good stability and reusability. [ABSTRACT FROM AUTHOR]

Magnetic separation technology is an efficient and feasible way to achieve rapid recovery of adsorbents, thus, the use of magnetic adsorbents has attracted the attention of many researchers. However, currently reported magnetic adsorbents have limited adsorption capacity due to insufficient adsorption sites and reactive groups. In this work, a novel magnetic chitosan-based amphiphilic adsorbent (PFSC) was synthesized by using UV-light irradiation method to combine with acryloyloxyethyl dimethylbenzyl ammonium chloride (AO), a molecule containing benzyl groups. PFSC and its precursors were carefully characterized, and their adsorption performances for the removal of anionic dyes were explored. The characterization results showed that the magnetic copolymers with a type of microsphere structure were successfully synthesized. Moreover, PFSC exhibited superior adsorption efficiency and pH resistance compared to those of an unmodified chitosan-based magnetic adsorbent (FSC). The maximum adsorption capacities of PFSC towards orange II (OG), acid red 88 (AE) and red amaranth (RM) were 955.0, 1075.8 and 567.5 mg/g at pH 3.0, respectively. The adsorption kinetics and isotherms of PFSC were consistent with that of a pseudo-second order kinetic model and the Langmuir isotherm model. In addition, adsorption-desorption experiments showed that PFSC could be rapidly separated and efficiently recycled even after 4 uses. More importantly, the FTIR and XPS results revealed that electrostatic adsorption and π-π stacking interactions were the main adsorption mechanisms for the PFSC-enhanced removal of anionic dyes. [Display omitted] • The chitosan-based amphiphilic magnetic copolymer was successfully synthesized by the UV-light initiated method. • The novel magnetic copolymer can be easily separated from solution by magnetic force. • The enhanced electrostatic adsorption and π-π stacking effect played an important role in the removal of anionic dyes. • The novel magnetic copolymer can be reused by simple acid-alkali adjustment. [ABSTRACT FROM AUTHOR]

• Magnetic biosorbents (PMCCs) were designed and fabricated by radical polymerization. • PMCCs had specific morphological and molecular structure for ciprofloxacin removal. • PMCCs exhibited excellent adsorption capacity of 527.93 mg·g−1 for ciprofloxacin. • The adsorption mechanisms of ciprofloxacin by PMCCs were systematically elucidated. • PMCCs displayed rapid separation and favorable reusability. Magnetic biosorbents with specific morphological and molecular structure (PMCCs) were designed for the removal of ciprofloxacin (CIP) from water. Radical polymerization method was applied to immobilize the designed polymer brushes onto core-shell shaped magnetic microspheres to fabricate PMCCs. PMCCs exhibited a maximum adsorption capacity of 527.93 mg·g−1, which is much higher than reported adsorbents, owing to the complete stretch of polymer brushes and increased active sites as well as enhanced interaction. The investigation on the adsorption behavior of PMCCs for CIP manifested that CIP adsorption well fitted the Langmuir isotherm model and pseudo-second-order kinetic model. The calculated thermodynamic parameters suggested that CIP adsorption onto PMCCs was spontaneous and exothermic. Further recycling experiments showed a loss of less than 20% in the CIP adsorption capacity after five times, demonstrating the reusability of the as-designed biosorbents. [ABSTRACT FROM AUTHOR]

[Display omitted] • A novel floating-separation adsorbent (APHGS-g-P(AMPS)) was designed and synthesized. • APHGS-g-P(AMPS) showed outstanding self-floating separation ability. • APHGS-g-P(AMPS) with satisfactory adsorption capacity was rich in –OH, –NH 2 and -SO 3 -. • The electrophilic addition strategy facilitated the grafting of P(AMPS) polymerized chains. • The sulfonic acid group exhibited excellent universal adsorption for MB and Pb(II). Inferior solid–liquid separation behavior and inadequate adsorption capacity are the main bottlenecks of current wastewater treatment adsorbents, especially in the purification of wastewater containing dyes and heavy metals. Accordingly, a novel floating separation adsorbent with polymeric chain structure, hollow glass sphere-g-(3-aminopropyl) triethoxysilane-g-poly(2-acrylamide-2-methyl-1-propanesulfonic acid) (APHGS-g-P(AMPS)), was fabricated through an electrophilic addition post-grafting strategy. The obtained APHGS-g-P(AMPS) exhibited satisfactory adsorption for methylene blue (MB) and lead ion (Pb(II)), as well as efficient flotation. Adsorption behavior analysis showed that the Pseudo-second-order kinetic model and Langmuir isotherm model were suitable for describing the adsorption process, and the maximum adsorption capacities for MB and Pb(II) were 249.33 and 345.93 mg·g−1 (313.15 K), respectively. Analysis of the adsorption mechanism indicated that the sulfonic acid group exhibited excellent universal adsorption for MB and Pb(II), which played a crucial role in the adsorption process. Furthermore, the efficient grafting of P(AMPS) polymerized chains onto the adsorbent was the pivotal factor to enhance adsorption. This study provided an efficient electrophilic addition post-grafting strategy for the structural design and functional modification of floating separation adsorbents. The results of this study are expected to have positive implications for the efficient purification of dyes and heavy metals wastewater. [ABSTRACT FROM AUTHOR]

[Display omitted] • Self-floating cyclodextrin-modified polymer was prepared. • The adsorption performance of TFCD and FTFCD was compared. • FTFCD simplified the recycling process by wrapping a hollow glass microsphere. • Porous structure and hydrophobic cavity favor the dye adsorption. • Polymers exhibited excellent selectivity toward cationic dyes. The separation and recycling processes of current cyclodextrin (CD)-based adsorbents are complicated. Thus, a novel composite based on a large surface area, porous, and self-floating tetrafluoroterephthalonitrile (TFN)-crosslinked CD polymer (FTFCD), was fabricated, characterized and applied to treat cationic dye pollutants. The characterization showed a porosity, good thermal stability, a stable crystal structure, and abundant functional groups on the prepared FTFCD, which had demonstrated great improvement on its adsorption capacity towards attention grabbing pollutants. The removal efficiency of the adsorbents for malachite green (MG) remained above 95% at pH 1 ∼ 10. In addition, the adsorbents were found to rapidly reach equilibrium governed by the pseudo-second-order kinetic model, and the maximum adsorption capacity of FTFCD was 1390.263 mg/g, as corroborated by the Langmuir isotherm model. While the phenolate groups of FTFCD found to electrostatically interacts with the MG strong cationic quaternary amine group, hydrogen-bonding was responsible for the hydroxyl group of FTFCD and the quaternary amine group binding. Meanwhile, the triangular cone configuration of MG makes it easy to be entrapped and absorbed in the hydrophobic cavity. Besides, after regeneration of exhausted FTFCD for five successive cycles, the MG removal efficiency still reached more than 80%. Thus, FTFCD could be applied as a potential alternative adsorbent for cationic dye removal owing to its excellent adsorption performance, convenient recycling, wide pH application, and environmental friendliness. [ABSTRACT FROM AUTHOR]