Search

• A novel strategy was developed to prepare nitrogen rich biochar. • APBC has high affinity and strong sorption ability towards Pb(II). • APBC contains abundant nitrogen and oxygen-containing groups. • Sorption of Pb(II) is mainly dominant by inner–sphere surface complexation. Biochar was prepared by torrefaction of ammonium persulphate pretreated bamboo (labeled as APBC) and applied into elimination of Pb(II) from water solutions. APBC was characterized by N 2 adsorption–desorption isotherms, elemental and Zeta potential analyses, SEM-EDS, XPS, and FTIR. Abundant N- and O-containing groups appeared atop APBC. Batch sorption assays revealed that APBC had high affinity and strong sorption ability towards Pb(II). The high Pb(II) adsorbing ability was attributed to the high contents of N- and O-containing functional groups of APBC. The adsorption mechanism mainly occurred by inner–sphere surface complexation. Hence, torrefaction of ammonium persulphate pretreated bamboo is a promising strategy for producing efficient biochar that is applicable for industrial wastewater treatment. [ABSTRACT FROM AUTHOR]

• The novel magnetic activated biochar nanocomposites were first time prepared using wakame. • Loading nickel on the surface of wakame biochar is conducive to its recycling. • The adsorption process is a spontaneous endothermic process. • At 293 K, the maximum adsorption capacity of MB is 479.49 mg/g. In this work, magnetic wakame biochar nanocomposites for the first time had been synthesized to investigate their adsorption to methylene blue dye. As-prepared magnetic biochar samples were obtained by the impregnation method to load nickel on wakame biochar via one-step carbonization with activation agent KOH at 800 °C. The prepared samples were characterized by BET, XRD, FTIR, Raman, SEM, TEM and so on. The results exhibited that the maximum adsorption capacity of BW(Ni)0.5 to methylene blue could reach 479.49 mg/g at 20 °C. The adsorption behavior was more suitable for Langmuir isotherm equation and the kinetic data were most consistent with the pseudo second-order model. And also, the adsorption reaction was a spontaneous and endothermic process. After five cycles, it was found that BW(Ni)0.5 had a high adsorption capacity for methylene blue (117.58 mg/g). This study demonstrated that wakame biochar could have great potential in dye wastewater treatment. [ABSTRACT FROM AUTHOR]

In this study, modified activated fishbone charcoal (MAFC) was successfully prepared to remove emulsified oil from oily wastewater. Various characteristic techniques, including SEM, XRD, FTIR, and BET, were employed to investigate the morphology, texture, and surface properties of as-prepared samples. BET results demonstrated that the specific surface area of fishbone charcoal increased from 69.8 m2/g to 206.0 m2/g after treatment with K2CO3 as an activating agent, while the total pore volume of MAFC increased from 0.003 cm3/g to 0.3 cm3/g, accompanied by the formation of abundant pore structures. It was observed that 90.1% of emulsified oil (100 mg/L) was successfully removed by MAFC under our experimental conditions. The results of a kinetic and isotherm model analysis indicated that the adsorption experimental data were not only consistent with the Langmuir adsorption isotherm but were also well-described by the pseudo-second-order adsorption model. It is expected that this highly efficient and inexpensive MAFC can be a promising bio-adsorbent for removing organic pollutants from industrial wastewater. [ABSTRACT FROM AUTHOR]