Search

Batch and continuous adsorption of Co2+ and Cu2+ from aqueous solutions by oxidized sugarcane bagasse (SBox) and oxidized cellulose (Cox) were investigated. The oxidation reaction of sugarcane bagasse and cellulose was made with a mixture of H3PO4‒NaNO2 to obtain SBox and Cox, with the introduction of high number of carboxylic acid functions, 4.5 and 4.8 mmol/g, respectively. The adsorption kinetics of Co2+ and Cu2+ on SBox and Cox were modeled using two models (pseudo-first-order and pseudo-second-order) and the rate-limiting step controlling the adsorption was evaluated by Boyd and intraparticle diffusion models. The Sips and Langmuir models better fitted the isotherms with values of maximum adsorption capacity Q max of 0.68 and 0.37 mmol/g for Co2+ and 1.20 and 0.57 mmol/g for Cu2+ adsorption on Cox and SBox, respectively. The reuse of both spent adsorbents was evaluated. Adsorption of Cu2+ and Co2+ on SBox in continuous was evaluated using a 22 factorial design with spatial time and initial metal concentration as independent variables and Q max and effective use of the bed as responses. The breakthrough curves were very well described by the Bohart–Adams original model and the Q max values for Co2+ and Cu2+ were 0.22 and 0.55 mmol/g. SBox confirmed to be a promising biomaterial for application on a large scale. [ABSTRACT FROM AUTHOR]

In this study sugarcane bagasse was modified with succinic anhydride and EDTA dianhydride to obtain SCB 2 and EB adsorbents, respectively. These adsorbents were used to remove etherdiamine, which is used for iron ore flotation from single aqueous solutions. The removal and recovery of etherdiamine is important for environmental and economic reasons due to its toxicity and high cost. The results demonstrated that adsorption of etherdiamine by SCB 2 and EB was better fitted by a pseudo-second-order kinetic model than pseudo-first-order and Elovich models. Adsorption isotherms were better fitted by the Langmuir model rather than the Freundlich, Sips, and Temkin models. The maximum adsorption capacities (Q max) of SCB 2 and EB for etherdiamine adsorption were found to be 869.6 and 1203.5 mg/g, respectively. The calculated ΔG° values for adsorption of etherdiamine on SCB 2 (−22.70 kJ/mol) and EB (−19.10 kJ/mol) suggested that chemisorption is the main mechanism by which etherdiamine is removed from the aqueous solution for both adsorbents. The high Q max values showed that SCB 2 and EB are potential adsorbents for recovering the etherdiamine and treating effluents produced from iron ore flotation. [Copyright &y& Elsevier]

Abstract: In this study the adsorption of cationic dyes by modified sugarcane bagasse with EDTA dianhydride (EB) was examined using methylene blue (MB) and gentian violet (GV) as model compounds in aqueous single solutions. The synthesized adsorbent (EB) was characterized by FTIR, elemental analysis, and BET. The capacity of EB to adsorb dyes was evaluated at different contact times, pH values, and initial dye concentrations. According to the obtained results, the adsorption processes could be described by a pseudo-second-order kinetic model. The adsorption isotherms were well fitted by the Langmuir model. Maximum adsorption capacities for MB and GV on EB were found to be 202.43 and 327.83 mg/g, respectively. The free energy change during adsorption of MB and GV was found to be −22.50 and −24.21 kJ/mol, respectively, suggesting that chemisorption is the main mechanism controlling the adsorption process. [Copyright &y& Elsevier]

Cellulose (Cel) and sugarcane bagasse (SB) were oxidized with an H 3 PO 4 -NaNO 2 mixture to obtain adsorbent materials with high contents of carboxylic groups. The oxidation reactions of Cel and SB were optimized using design of experiments (DOE) and response surface methodology (RSM). The optimized synthesis conditions yielded Cox and SBox with 4.8 mmol/g and 4.5 mmol/g of carboxylic acid groups, respectively. Cox and SBox were characterized by FTIR, TGA, PZC and solid-state 13 C NMR. The adsorption of the model cationic dyes crystal violet (CV) and auramine-O (AO) on Cox and SBox in aqueous solution was investigated as a function of the solution pH, the contact time and the initial dye concentration. The adsorption of CV and AO on Cox was described by the Elovich equation and the pseudo-first-order kinetic model respectively, while the adsorption of CV and AO on SBox was described by the pseudo-second-order kinetic model. Adsorption isotherms were well fitted by the Langmuir and Konda models, with maximum adsorption capacities ( Q max ) of 1117.8 mg/g of CV and 1223.3 mg/g of AO on Cox and 1018.2 mg/g of CV and 682.8 mg/g of AO on SBox. Desorption efficiencies were in the range of 50–52% and re-adsorption capacities varied from 65 to 81%, showing the possibility of reuse of both adsorbent materials. [ABSTRACT FROM AUTHOR]