Search

A phosphorus removal biochar adsorbent was prepared from Fenton sludge. The adsorption process was optimized, and its phosphorus adsorption mechanism was discussed. It was found that the phosphorus adsorption performance of biochar prepared from single Fenton sludge (FBC‐400) was better than that of co‐pyrolysis of Fenton sludge and bamboo powder. The optimum condition was that Fenton sludge pyrolyzed at 400°C (FBC‐400). FBC‐400 had a larger specific surface area than that prepared by co‐pyrolysis with bamboo powder. And the high content of iron element could provide a higher surface charge of the biochar, thereby increasing the electrostatic adsorption of phosphorus onto FBC‐400. The phosphorus adsorption was highly pH dependent by FBC‐400, which can enhance electrostatic adsorption and increase adsorption capacity in acidic conditions. The effect of coexisting anion on adsorption performance was mainly affected by CO32−, reducing the adsorption capacity by at least 49%, whereas other anions had no obvious interference. The adsorption process of FBC‐400 accorded with the pseudo‐second‐order kinetic model and the Langmuir model, which indicated that the adsorption process was monolayer adsorption and mainly chemical adsorption, and the maximum saturated phosphorus adsorption capacity was 8.77 mg g−1. The mechanisms for phosphorus adsorption were electrostatic adsorption and inner‐sphere complexing. 1 M NaOH was used for desorption, and the adsorption capacity remained at 81% in the fifth cycle. Practitioner Points: The Fenton sludge biochar usage as an adsorbent could be a win‐win strategy to convert waste biomass to valuable ‐ product.The adsorption process accorded with the Langmuir model, the maximum phosphorus adsorption capacity was 8.77 mg/g at 25°C.The adsorption mechanisms were electrostatic adsorption and inner‐sphere complexing.1M NaOH was used for desorption, and the adsorption capacity remained at 81% in the fifth cycle. [ABSTRACT FROM AUTHOR]

Flow electrode capacitive deionization (FCDI) has great advantages in high salinity wastewater desalination. However, due to the limited adsorption capacity of electrode material, membrane concentration polarization would form and increase energy consumption, and affect the continuity of desalination. In this work, milling technology was used to modify original activated carbon (AC), the obtained ball milled activated carbon (BAC) was used as FCDI electrode material. The milling process modified multiple physical and electrochemical characteristics of original AC. The highest average salt removal rate (ASRR) of BAC was 2.2 times of that of AC, which was attributed to the modified surface properties including more oxygenated functional group, larger electrostatic gravitation characteristics and better hydrophilicity. The reduced concentration polarization during the desalination was responsible for the increased adsorption capacity, which was due to larger electrolyte contact area, enhanced ions capacity by more suitable pore structures, and 5 times higher energy normalized removal salt (ENRS) of BAC flow electrode than that of AC. Because of its simple operation and remarkable modification effect, ball milling technology shows great potential in large scale modification of electrode materials. [ABSTRACT FROM AUTHOR]