Search

Climate change may seriously affect the energy consumption of buildings by influencing their air conditioning loads, especially the ventilation loads which vary directly with the local weather conditions. Research on how the ventilation load responds to climate change is of great significance, especially in coastline subtropical regions like Hong Kong. This paper investigated the impacts of climate change on buildings' ventilation load and building energy use in Hong Kong with the hourly meteorological data from 1950 to 2007. Results have been well validated by the simulation of a typical local hotel building during this period. The results show that climate warming increases both sensible and latent parts of the cooling ventilation load. The latent part, which occupies ∼80% of the total ventilation load, increases at a higher rate, about twice of that of the sensible one. Furthermore, it is found that the urban heat island (UHI) effect causes a much higher growth rate of the ventilation load at night, which is about three times compared with that in the daytime. The latent part of the cooling ventilation load at night, which is found to be the most sensitive component to the climate change, plays a most significant role in the energy consumption increase. The possible measures were thus suggested to avoid negative changes of the ventilation load. Besides, reducing the UHI effect by better urban planning also significantly benefits the local buildings with a long air-conditioning operation time. [ABSTRACT FROM AUTHOR]

The feasibility of using thermal performance lines to assess the efficiency of using energy in air-conditioned commercial buildings in Hong Kong is being explored. The paper describes a regression study aimed at identifying a suitable climatic variable that would yield linear thermal performance lines for commercial buildings in Hong Kong. The study was based on the monthly electricity consumption of 26 existing office/commercial buildings obtained from a recent survey. Candidate weather parameters considered include monthly mean outdoor temperature, outdoor air moisture content and global solar radiation, and their square and product terms. The regression analysis shows that the square of monthly mean outdoor temperature would be the most appropriate climatic variable. Explanations are also given as to why moisture content and global solar radiation were considered less appropriate, notwithstanding that in Hong Kong, the humidity is high for most of the time in the year and the cooling load due to solar heat gain is a significant component of the design cooling load of air-conditioned buildings. [ABSTRACT FROM AUTHOR]

In the Hong Kong Building Environmental Assessment Method (HK-BEAM) for air-conditioned office premises, energy use for air-conditioning constitutes one major item of assessment. The current assessment method for existing offices is based on computer simulation predictions. Following a recent review of the HK-BEAM scheme, simplified models have been developed for use in the assessment as an alternative to the detailed simulation method. These models are multiple linear regression models relating the annual electricity use for air-conditioning, and the maximum electricity demand, in an office building to the key characteristics of the building envelope and the air-conditioning system. Use of these models can reduce the effort required for data collection and input, and will allow the assessors to more quickly complete an assessment. In addition, additional parametric studies can be performed within much less time, which will help assessors in formulating advice to developers/designers on measures that will lead to improved energy performance and thus higher credits. This paper summarizes the review findings and describes the approach taken in the establishment of the regression models. Comparison of predictions by the detailed computer simulation method and the alternative method showed that the latter could provide estimates close enough to the simulation predictions for the purpose of assessing the credits to be awarded to a building for its energy performance. [ABSTRACT FROM AUTHOR]

Abstract: In Hong Kong, conventional air-conditioning (AC) systems cause a high energy consumption and poor indoor thermal comfort. This paper investigated the AC load profiles of three typical local commercial buildings, i.e. office, hotel and retail, and examined the energy consumption of liquid desiccant cooling system (LDCS) for these buildings. Simulation results showed that the cooling load contributed to more than 98% of total annual load, with high latent load proportion from March to September. The high reheating ratio, i.e. from 60% to 90%, is found to be the main reason for the poor thermal comfort. Therefore, the LDCS which could handle sensible and latent loads separately was proposed. However, the electricity-driven LDCS was found not suitable for local commercial buildings. significant energy saving could be achieved by the solar-assisted LDCS system with thermal storage, when the installation area for solar collectors is larger than the minimum required one, i.e. 9.7m2/(kWm−2) for office and 12.7m2/(kWm−2) for hotel buildings. Energy saving of different system types with different installation areas was also studied. The solar-assisted LDCS shows more energy saving in winter but less in summer. Results and conclusions can be useful for researchers and local engineers. [Copyright &y& Elsevier]

Abstract: Hong Kong is located in a typical subtropical region. The buildings in Hong Kong are subjected to high cooling demands for their air-conditioning systems throughout most of the year, and their contribution toward the total energy consumption is about 40%. Therefore, energy efficiency in buildings is essential to reduce the global energy use and improve the local environmental sustainability. This paper provides an overall review of the building energy research and efforts in Hong Kong over the last decade. Various aspects and energy saving measures, including energy policy, energy audit, design, control, diagnosis, building performance evaluation and renewable energy systems, studied or used to enhance the energy efficiency in buildings are reviewed. A brief introduction of the Hong Kong Building Energy Codes (BEC) and Hong Kong Building Environmental Assessment Method (HK-BEAM) are also provided to present the efforts of the local government and community on energy efficiency in buildings. This review aims at providing building researchers and practitioners a better understanding of buildings energy saving opportunities and approaches in cities particularly in subtropical regions and taking further proper actions to promote buildings energy efficiency and conservation. [Copyright &y& Elsevier]