Search

Gas temperature plays an important role in the characterization of plasma parameters. The temperature evolution of stem roots during the dark period is at the heart of our understanding of the physical mechanism of streamer to the leader transition process in a long spark discharge. The quantitative schlieren system with high spatiotemporal resolution was designed to conduct positive leader discharge experiments with a 1.0 m rod-plate gap at atmospheric pressure, and the amplitude and rise time of positive impulse voltage waveforms were 380 kV and 200 μs, respectively. The time-resolved quantitative schlieren images of the discharge channel near the electrode tip can be captured to gather the temperature data of stem roots for case study. Further statistical tests revealed that due to the dispersion of the first streamer discharge, there were three evolutionary trends of gas temperature at the axis of the stem root in the early dark period. Interestingly, the gas temperature at the axis of the stem root was maintained at 1000–1200 K in regardless of the evolutionary trend in the early dark period. In addition, the statistical results indicate that there is a significant positive correlation between the curvature radius of the discharge electrode tip and the critical charge value Qcrit of the first streamer discharge, which leads to a transition in evolutionary trends of gas temperature at the axis of the stem root. This research has important guiding significance for understanding the physical mechanism of leader inception and the whole process modeling of long air gap discharge. [ABSTRACT FROM AUTHOR]

In this paper, the effect of the corona space charge on the leader initiation is experimentally and theoretically investigated. The critical corona charge for the stem–leader transition is reviewed and a more proper charge criterion is recommended based on the experimental measurements and theoretical analysis. It is shown that the chocking effect of the corona space charge for the second corona inception should not be ignored, which decreases the electric field strength of the stem tip and hinders the initiation of the leader. A simple physical model is proposed to calculate the leader initiation time, which can consider the thermodynamic mechanism for stem–leader transition and the chocking effect of the corona space charge, and a good agreement with the experimental results was obtained. [ABSTRACT FROM PUBLISHER]

Positive leader current spikes were observed in long air gap discharge. However, there has been no explanation on this phenomenon so far, and some leader advancement models can only produce the current without spikes. Therefore, it is necessary to figure out this phenomenon in order to deepen the understanding of leader discharge. In this paper, experiments of leader development were carried out in a 10 m rod-plane gap under positive switching impulse. The discharge current and high speed photographs of discharge process were recorded synchronously. Then the high speed photographs during the period when the leader current fluctuated were carefully analyzed. The experimental results showed that the leader current spikes were with leader branching. Finally, the effect of branching on the spikes of positive current was explained qualitatively and a hypothesis on leader branching was proposed. [ABSTRACT FROM AUTHOR]

Electrical discharges in long air gaps, referred to as 'leader discharges', usually propagate with transient thermal plasma channels. The gas temperature evolution of the channels plays a key role in the inception and development of leader discharges. This paper is aimed at investigating the use of quantitative Schlieren techniques in temperature measurement of the leader discharge channels. To do this, a calibrated Toepler's lens-type Schlieren system was set up to measure the radial temperature profile of leader discharge channels. The measurements were compared with the simulation results from a detailed numerical model which describes the thermal-hydrodynamic properties of the channel. The comparison shows that although a good agreement is obtained when the leader is propagating in a stable manner, the measurements of the temperature evolution at the axis of leader channel deviate significantly from the numerical simulation during the leader initiation stage. Apart from the limited spatial and temporal resolution of the Schlieren system, the deviation is also caused by the non-isobaric gas heating during leader inception. Based on the theoretical analysis and numerical simulation, we proposed several suggestions to the application of quantitative Schlieren techniques to measure the temperature of leader channels. [ABSTRACT FROM AUTHOR]