Search

This paper analyzed the flux characteristics of a single-phase tubular switched reluctance linear motor (TSRLM) based on magnetic equivalent circuit (MEC) method. The single-phase TSRLM is divided into five different parts, which are the teeth of the stator, the yoke of the stator, air gap, the teeth of the mover, and the yoke of the mover. The reluctance of every part is expressed in analytical formulas at five special mover positions. The flux linkages at five special mover positions are calculated by magnet tube method and Gauss–Seidel iteration method which takes the saturation into consideration. A high-order Fourier series method is used to map the nonlinear relationship between flux linkage, current, and mover position with the flux linkage data calculated by the MEC method. The calculated flux linkage is consistent with 3-D finite-element method and experimental results. The dynamic and static performance of the simulation utilized with MEC method is consistent with those in experiments, which verifies the accuracy of the MEC method proposed in this paper. [ABSTRACT FROM AUTHOR]

This paper analyzes the flux characteristics and normal force of the double-sided switched reluctance linear machine (SRLM) under the asymmetric air gap. The magnetic equivalent circuit (MEC) of the machine and the details of the flux paths configuration at six distinct mover positions under the asymmetric air gap are included. Then, six special mover position magnetization curves are calculated by solving the MEC with the method of Gauss–Seidel. The magnetic flux-linkage model and thrust model based on six distinct mover positions are established by analytical polynomial. Three-dimensional (3-D) finite-element method (FEM) simulation and the experimental study with the prototype hardware are carried out to validate the accuracy of the MEC model calculated for the flux linkage and normal force. The six distinct mover positions flux linkage and normal force calculated by the MEC are consistent with the 3-D FEM calculated data and experimental data. It indicates that the proposed method to calculate the flux linkage and the normal force is feasible and effective. The dynamic analysis is also conducted. The simulated phase current waveforms are also consistent with the experimental results. It indicates that the presented method can be used to simulate the phase current under the asymmetry air gap effectively. The normal force under different asymmetry rates is analyzed, which provides the theoretical basis for reducing the unbalanced force of the double-sided SRLM. [ABSTRACT FROM AUTHOR]