Search

The light absorption properties of brown carbon (BrC), which are linked to molecular chromophores, may play a significant role in the Earth's energy budget. While nitroaromatic compounds have been identified as strong chromophores in wildfire-driven BrC, other types of chromophores remain to be investigated. Given the electron-withdrawing nature of carbonyls ubiquitous in the atmosphere, we characterized carbonyl chromophores in BrC samples from the nighttime oxidation of furan and pyrrole derivatives, which are important but understudied precursors of secondary organic aerosols primarily found in wildfire emissions. Various carbonyl chromophores were characterized and quantified in BrC samples, and their ultraviolet-visible spectra were simulated by using time-dependent density functional theory. Our findings suggest that chromophores with carbonyls bonded to nitrogen (i.e., imides and amides) derived from N-containing heterocyclic precursors substantially contribute to BrC light absorption. The quantified N-containing carbonyl chromophores contributed to over 40% of the total light absorption at wavelengths below 350 nm and above 430 nm in pyrrole BrC. The contributions of chromophores to total light absorption differed significantly by wavelength, highlighting their divergent importance in different wavelength ranges. Overall, our findings highlight the significance of carbonyl chromophores in secondary BrC and underscore the need for further investigation.

Nitrogen-containing heterocyclic volatile organic compounds (VOCs) are important components of wildfire emissions that are readily reactive toward nitrate radicals (NO 3 ) during nighttime, but the oxidation mechanism and the potential formation of secondary organic aerosol (SOA) and brown carbon (BrC) are unclear. Here, NO 3 oxidation of three nitrogen-containing heterocyclic VOCs, pyrrole, 1-methylyrrole (1-MP), and 2-methylpyrrole (2-MP), was investigated in chamber experiments to determine the effect of precursor structures on SOA and BrC formation. The SOA chemical compositions and the optical properties were analyzed using a suite of online and offline instrumentation. Dinitro- and trinitro-products were found to be the dominant SOA constituents from pyrrole and 2-MP, but not observed from 1-MP. Furthermore, the SOA from 2-MP and pyrrole showed strong light absorption, while that from 1-MP were mostly scattering. From these results, we propose that NO 3 -initiated hydrogen abstraction from the 1-position in pyrrole and 2-MP followed by radical shift and NO 2 addition leads to light-absorbing nitroaromatic products. In the absence of a 1-position hydrogen, NO 3 addition likely dominates the 1-MP chemistry. We also estimate that the total SOA mass and light absorption from pyrrole and 2-MP are comparable to those from phenolic VOCs and toluene in biomass burning, underscoring the importance of considering nighttime oxidation of pyrrole and methylpyrroles in air quality and climate models.

The toxicity of organic aerosols has been largely ascribed to the generation of reactive oxygen species, which could subsequently induce oxidative stress in biological systems. The reaction of DTT with redox-active species in PM has been generally assumed to be pseudo-first order, with the oxidative potential of PM being represented by the DTT consumption per minute of reaction time per μg of PM. Although catalytic reactive species such as transition metals and quinones are long believed to be the main contributors of DTT responses, the role of non-catalytic DTT reactive species such as organic hydroperoxides (ROOH) and electron-deficient alkenes (e.g., conjugated carbonyls) in DTT consumption has been recently highlighted. Thus, understanding the reaction kinetics and mechanisms of DTT consumption by various PM components is required to interpret the oxidative potential measured by DTT assays more accurately. In this study, we measured the DTT consumptions over time and characterized the reaction products using model compounds and secondary organic aerosols (SOA) with varying initial concentrations. We observed that the DTT consumption rates linearly increased with both initial DTT and sample concentrations. The overall reaction order of DTT with non-catalytic reactive species and SOA in this study is second order. The reactions of DTT with different functional groups have significantly different rate constants. The reaction rate constant of isoprene SOA with DTT is mainly determined by the concentration of ROOH. For toluene SOA, both ROOH and electron-deficient alkenes may dominate its DTT reaction rates. These results provide some insights into the interpretation of DTT-based aerosol oxidative potential and highlight the need to study the toxicity mechanism of ROOH and electron-deficient alkenes in PM for future work., Competing Interests: Declaration of competing interest The authors declare no conflict of interest., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

Dimethyl selenide (DMSe) is one of the major volatile organoselenium compounds released from aquatic and terrestrial environments through microbial transformation and plant metabolism. The detailed processes of DMSe leading to secondary organic aerosol (SOA) formation and the pulmonary health effects induced by inhalation of DMSe-derived SOA remain largely unknown. In this study, we characterized the chemical composition and formation yields of SOA produced from the oxidation of DMSe with OH radicals and O 3 in controlled chamber experiments. Further, we profiled the transcriptome-wide gene expression changes in human airway epithelial cells (BEAS-2B) after exposure to DMSe-derived SOA. Our analyses indicated a significantly higher SOA yield resulting from the OH-initiated oxidation of DMSe. The oxidative potential of DMSe-derived SOA, as measured by the dithiothreitol (DTT) assay, suggested the presence of oxidizing moieties in DMSe-derived SOA at levels higher than typical ambient aerosols. Utilizing RNA sequencing (RNA-Seq) techniques, gene expression profiling followed by pathway enrichment analysis revealed several major biological pathways perturbed by DMSe-derived SOA, including elevated genotoxicity, DNA damage, and p53-mediated stress responses, as well as downregulated cholesterol biosynthesis, glycolysis, and interleukin IL-4/IL-13 signaling. This study highlights the significance of DMSe-derived SOA as a stressor in human airway epithelial cells.

Isoprene-derived secondary organic aerosol (SOA), which comprise a large portion of atmospheric fine particulate matter (PM 2.5 ), can be formed through various gaseous precursors, including isoprene epoxydiols (IEPOX), methacrylic acid epoxide (MAE), and isoprene hydroxyhydroperoxides (ISOPOOH). The composition of the isoprene-derived SOA affects its reactive oxygen species (ROS) generation potential and its ability to alter oxidative stress-related gene expression. In this study we assess effects of isoprene SOA derived solely from ISOPOOH oxidation on human bronchial epithelial cells by measuring the gene expression changes in 84 oxidative stress-related genes. In addition, the thiol reactivity of ISOPOOH-derived SOA was measured through the dithiothreitol (DTT) assay. Our findings show that ISOPOOH-derived SOA alter more oxidative-stress related genes than IEPOX-derived SOA but not as many as MAE-derived SOA on a mass basis exposure. More importantly, we found that the different types of SOA derived from the various gaseous precursors (MAE, IEPOX, and ISOPOOH) have unique contributions to changes in oxidative stress-related genes that do not total all gene expression changes seen in exposures to atmospherically relevant compositions of total isoprene-derived SOA mixtures. This study suggests that amongst the different types of known isoprene-derived SOA, MAE-derived SOA are the most potent inducer of oxidative stress-related gene changes but highlights the importance of considering isoprene-derived SOA as a total mixture for pollution controls and exposure studies.

In the present study, formation of aromatic organosulfates (OSs) from the photo-oxidation of polycyclic aromatic hydrocarbons (PAHs) was investigated. Naphthalene (NAP) and 2-methylnaphthalene (2-MeNAP), two of the most abundant gas-phase PAHs and thought to represent "missing" sources of urban SOA, were photochemically oxidized in an outdoor smog chamber facility in the presence of nonacidified and acidified sulfate seed aerosol. Effects of seed aerosol composition, acidity and relative humidity on OS formation were examined. Chemical characterization of SOA extracts by ultra performance liquid chromatography coupled to electrospray ionization high-resolution quadrupole time-of-flight mass spectrometry revealed the formation of OSs and sulfonates from photo-oxidation in the presence of sulfate seed aerosol. Many of the organosulfur compounds identified in the smog chamber extracts were also measured in urban fine aerosol collected at Lahore, Pakistan, and Pasadena, USA, demonstrating that PAH photo-oxidation in the presence of sulfate aerosol is a hitherto unrecognized source of anthropogenic secondary organosulfur compounds, and providing new PAH SOA tracers.

Exposure to volatile organic compounds from outdoor air pollution is a major public health concern; however, there is scant information about the health effects induced by inhalation exposure to photochemical transformed products of primary emissions. In this study, we present a stable and reproducible exposure method to deliver ppm-ppb levels of gaseous standards in a humidified air stream for in vitro cell exposure through a direct air-liquid interface. Gaseous species were generated from a diffusion vial, and coupled to a gas-phase in vitro exposure system. Acrolein and methacrolein, which are major first-generation photochemical transformation products of 1,3-butadiene and isoprene, respectively, were selected as model compounds. A series of vapor concentrations (0.23-2.37 ppmv for acrolein and 0.68-10.7 ppmv for methacrolein) were investigated to characterize the exposure dose-response relationships. Temperature and the inner diameter of the diffusion vials are key parameters to control the evaporation rates and diffusion rates for the delivery of target vapor concentrations. Our findings suggest that this exposure method can be used for testing a wide range of atmospheric volatile organic compounds, and permits both single compound and multiple compound sources to generate mixtures in air. The relative standard deviations (%RSD) of output concentrations were within 10% during the 4-hour exposure time. The comparative exposure-response data allow us to prioritize numerous hazardous gas phase air pollutants. These identified pollutants can be further incorporated into air quality simulation models to better characterize the environmental health risks arising from inhalation of the photochemical transformed products.

Isoprene significantly contributes to organic aerosol in the southeastern United States where biogenic hydrocarbons mix with anthropogenic emissions. In this work, the Community Multiscale Air Quality model is updated to predict isoprene aerosol from epoxides produced under both high- and low-NOx conditions. The new aqueous aerosol pathways allow for explicit predictions of two key isoprene-derived species, 2-methyltetrols and 2-methylglyceric acid, that are more consistent with observations than estimates based on semivolatile partitioning. The new mechanism represents a significant source of organic carbon in the lower 2 km of the atmosphere and captures the abundance of 2-methyltetrols relative to organosulfates during the simulation period. For the parametrization considered here, a 25% reduction in SOx emissions effectively reduces isoprene aerosol, while a similar reduction in NOx leads to small increases in isoprene aerosol.

Isoprene is a substantial contributor to the global secondary organic aerosol (SOA) burden, with implications for public health and the climate system. The mechanism by which isoprene-derived SOA is formed and the influence of environmental conditions, however, remain unclear. We present evidence from controlled smog chamber experiments and field measurements that in the presence of high levels of nitrogen oxides (NO(x) = NO + NO2) typical of urban atmospheres, 2-methyloxirane-2-carboxylic acid (methacrylic acid epoxide, MAE) is a precursor to known isoprene-derived SOA tracers, and ultimately to SOA. We propose that MAE arises from decomposition of the OH adduct of methacryloylperoxynitrate (MPAN). This hypothesis is supported by the similarity of SOA constituents derived from MAE to those from photooxidation of isoprene, methacrolein, and MPAN under high-NOx conditions. Strong support is further derived from computational chemistry calculations and Community Multiscale Air Quality model simulations, yielding predictions consistent with field observations. Field measurements taken in Chapel Hill, North Carolina, considered along with the modeling results indicate the atmospheric significance and relevance of MAE chemistry across the United States, especially in urban areas heavily impacted by isoprene emissions. Identification of MAE implies a major role of atmospheric epoxides in forming SOA from isoprene photooxidation. Updating current atmospheric modeling frameworks with MAE chemistry could improve the way that SOA has been attributed to isoprene based on ambient tracer measurements, and lead to SOA parameterizations that better capture the dependency of yield on NO(x).

E-cigarette aerosols contain a complex mixture of harmful and potentially harmful chemicals. Once released into the environment, they evolve and become new sources of indoor air pollutants that could pose a significant threat to both users and non-users. However, current understanding of the physicochemical properties of e-cigarette aerosol constituents that govern gas-particle partitioning in the atmosphere is limited, making it difficult to estimate the health risks associated with exposure. Here, we used correlation gas chromatography (C-GC) and two-dimensional volatility basis set (2D-VBS) methods to determine the vapor pressures and volatility for commonly reported toxic and irritating e-cigarette aerosol constituents. The vapor pressures of target compounds at 298 K were estimated from the Antoine-type linear relationship between the vapor pressure of reference standards and their retention times. Our C-GC results showed an overall positive correlation (R = 0.84) with estimates using the EPI (Estimation Programs Interface) Suite. The volatility calculated by 2D-VBS correlates well with the calculated vapor pressure from both C-GC (R = 0.82) and EPI Suite (R = 0.85). The volatility distribution also indicated fresh e-cigarette aerosol constituents are mainly more volatile organic compounds. Our case study revealed that low-vapor-pressure compounds (e.g., σ-dodecalactone, γ-decalactone, and maltol) become enriched in the e-cigarette aerosols within 2 h following vaping emissions. Overall, these findings demonstrate the applicability of the C-GC and 2D-VBS methods for determining the physiochemical properties of e-cigarette aerosol constituents, which can aid in assessing the dynamic chemical composition of e-cigarette aerosols and exposures to vaping emissions in indoor environments. Copyright © 2024 American Association for Aerosol Research [ABSTRACT FROM AUTHOR]

Dimitrova and Velizarova [[10]] used the high-resolution Atmospheric Dispersion Modelling System (ADMS)-Urban to investigate particulate matter pollution sources in the area of Sofia (Bulgaria) taking into account four main emission sources: point industrial, domestic heating, roads, and unorganised transport. 10.3390/atmos12040423 11 Matkovic V., Muli'c M., Azabagi'c S., Jevti'c M. Premature Adult Mortality and Years of Life Lost Attributed to Long-Term Exposure to Ambient Particulate Matter Pollution and Potential for Mitigating Adverse Health Effects in Tuzla and Luka-vac, Bosnia and Herzegovina. The Special Issue covers analyses of air quality [[10]], health impact assessment [[11], [16]], exposure [[12], [16]], emission sources [[13]], epidemiology [[14], [17]], toxicology [[15]] and other topics related to health effects of air pollution [[18]]. Atmospheric particulate matter pollution can lead to an increase in the morbidity and mortality of cardiovascular and cerebrovascular diseases. [Extracted from the article]