Search

Tracking variations in both the latency and amplitude of evoked potential (EP) is important in quantifying properties of the nervous system. Adaptive filtering is a powerful tool for tracking such variations. In this paper, a data-reusing non-linear adaptive filtering method, based on a radial basis function network (RBFN), is implemented to estimate EP. The RBFN consists of an input layer of source nodes, a single hidden layer of non-linear processing units and an output layer of linear weights. It has built-in nonlinear activation functions that allow learning of function mappings. Moreover, it produces satisfactory estimates of signals against a background noise without a priori knowledge of the signal, provided that the signal and noise are independent. In clinical situations where EP responses change rapidly, the convergence rate of the algorithm becomes a critical factor. A carefully designed data-reusing RBFN can accelerate the convergence rate markedly and, thus, enhance its performance. Both theoretical analysis and simulation results support the improved performance of our new algorithm.

Somatosensory evoked potential (SEP) testing has been widely applied to diagnosis of various neurological disorders. However, SEP recorded using surface electrodes is buried in noises, which makes the signal-to-noise ratio (SNR) very poor. Conventional averaging method usually requires up to thousands of raw SEP input trials to increase the SNR so that an identifiable waveform can be produced for latency and amplitude measurement. In this study, a multi-adaptive filtering (MAF) technique, emerging from the combination of well-developed adaptive noise canceller and adaptive signal enhancer, is introduced for fast and accurate surface SEP extraction. The MAF technique first processes the raw surface recorded SEP by the Canceller with a reference noise channel of background noise for adaptive subtraction before entering the Enhancer. The MAF was verified by filtering simulated SEP signals in which electroencephalography and Gaussian noise of different SNRs were added. It was found that the MAF could effectively suppress the noise and enhance the SEP components such that the SNR of the SEP is improved. Results showed that MAF with 50 input trials could provide similar performance in SEP detection to those extracted by the conventional averaging method with 1000 trials even at an SNR of -20 dB.

In this paper, we propose a novel approach for electron paramagnetic resonance (EPR) mixture spectra analysis based on blind source separation (BSS) technique. EPR spectrum of a free radical is often superimposed by overlapping spectra of other species. It is important and challenging to accurately identify and quantify the 'pure' spectra from such mixtures. In this study, an automated BSS method implementing independent component analysis is used to extract the components from mixed EPR spectra that contain overlapping components of different paramagnetic centers. To apply this method, there is no requirement to know the component spectra or the number of components in advance. The method is applied to analyze free radical EPR spectra which are collected from standard chemical system, cultured cell suspense, and ex vivo rat kidneys by spin trapping EPR technique. Results show that the BSS method proposed here is capable of identifying the component EPR spectra from mixtures with unknown compositions. The BSS technique can offer powerful aids in resolving spectral overlapping problems in general EPR spectroscopy analysis.

Background: Accurate, rapid detection of atrial tachyarrhythmias has important implications in the use of implantable devices for treatment of cardiac arrhythmia. Currently available detection algorithms for atrial tachyarrhythmias, which use the single-index method, have limited sensitivity and specificity., Methods and Results: In this study, we evaluated the performance of a new Bayesian discriminator algorithm in the detection of atrial fibrillation (AF), atrial flutter (AFL), and sinus rhythm (SR). Bipolar recording of 364 rhythms (AF=156, AFL=88, SR=120) at the high right atrium were collected from 20 patients who underwent electrophysiological procedures. After initial signal processing, a column vector of 5 features for each rhythm were established, based on the regularity, rate, energy distribution, percent time of quiet interval, and baseline reaching of the rectified autocorrelation coefficient functions. Rhythm identification was obtained by use of Bayes decision rule and assumption of Gaussian distribution. For the new Bayesian discriminator, the overall sensitivity for detection of SR, AF, and AFL was 97%, 97%, and 94%, respectively; and the overall specificity for detection of SR, AF, and AFL was 98%, 98%, and 99%, respectively. The overall accuracy of detection of SR, AF, and AFL was 98%, 97% and 98%, respectively. Furthermore, sensitivity, specificity, and accuracy of this algorithm were not affected by a range of white Gaussian noises with different intensities., Conclusions: This new Bayesian discriminator algorithm, based on Bayes decision of multiple features of atrial electrograms, allows rapid on-line and accurate (98%) detection of AF with robust anti-noise performance.

This paper proposes a fuzzy approach to classify single-site electromyograph (EMG) signals for multifunctional prosthesis control. While the classification problem is the focus of this paper, the ultimate goal is to improve myoelectric system control performance, and classification is an essential step in the control. Time segmented features are fed to a fuzzy system for training and classification. In order to obtain acceptable training speed and realistic fuzzy system structure, these features are clustered without supervision using the Basic Isodata algorithm at the beginning of the training phase, and the clustering results are used in initializing the fuzzy system parameters. Afterwards, fuzzy rules in the system are trained with the back-propagation algorithm. The fuzzy approach was compared with an artificial neural network (ANN) method on four subjects, and very similar classification results were obtained. It is superior to the latter in at least three points: slightly higher recognition rate; insensitivity to overtraining; and consistent outputs demonstrating higher reliability. Some potential advantages of the fuzzy approach over the ANN approach are also discussed.

A method of detecting brainstem auditory evoked potential (BAEP) using adaptive signal enhancement (ASE) is proposed and tested in humans and cats. The ASE in this system estimates the signal component of the primary input, which is correlated with the reference input to the adaptive filter. The reference input is carefully designed to make an optimal and rapid estimation of the signal corrupted with noise, such as ongoing EEG. With a good choice of reference input, it is possible to track the variability of BAEP efficiently and rapidly. Moreover, the number of repetitions required could be markedly reduced and the result of the system is superior to that of ensemble averaging (EA). To detect BAEP in cats, only 30 ensemble averages are needed to obtain a reasonable reference input to the adaptive filter, and, for humans, 350-750 ensemble averages are sufficient for a satisfactory result. Using the LMS adaptive algorithm, individual BAEP can be obtained in real-time.

The traditional brainstem auditory evoked response (BAER) measurement technique (ensemble averaging) is time-consuming and is not acceptable for some time-critical clinical applications. In the paper the application of a pseudorandom binary sequence, the maximum length sequence, to human BAER measurements is examined. This technique permits a faster click rate to stimulate the test subject, and obtains a higher signal-to-noise ratio (SNR) response through deconvolution. When compared with conventional averaging, the method can result in an improved SNR or in faster measurement of BAER. The theory of the technique and the experimental setup are presented, and theoretical analysis on the SNR improvement by this technique against averaging is also given. Actual measurements of BAER on both humans and cats indicate that this technique is effective, especially when the measurement time is not too long, or the number of trials is not too large.

The maximum length sequence (MLS) technique is applied to improve data collection of a clinically important long latency visual potential. Given a limited time for measuring the response and with low number of stimulus presentation, the MLS technique exceeded the conventional method of ensemble averaging in attaining a higher signal-to-noise ratio (SNR). The theoretical consideration of such improvement is developed along with the system implementation. Typical examples of the results obtained in a human subject are presented.