Search

Due to the unpredictability of the majority of green energy sources (GESs), particularly in microgrids (μGs), frequency deviations are unavoidable. These factors include solar irradiance, wind disturbances, and parametric uncertainty, all of which have a substantial impact on the system's frequency. An adaptive load frequency control (LFC) method for power systems is suggested in this paper to mitigate the aforementioned issues. For engineering challenges, soft computing methods like the bat algorithm (BA), where it proves its effectiveness in different applications, consistently produce positive outcomes, so it is used to address the LFC issue. For online gain tuning, an integral controller using an artificial BA is utilized, and this control method is supported by a modification known as the balloon effect (BE) identifier. Stability and robustness of analysis of the suggested BA+BE scheme is investigated. The system with the proposed adaptive frequency controller is evaluated in the case of step/random load demand. In addition, high penetrations of photovoltaic (PV) sources are considered. The standard integral controller and Jaya+BE, two more optimization techniques, have been compared with the suggested BA+BE strategy. According to the results of the MATLAB simulation, the suggested technique (BA+BE) has a significant advantage over other techniques in terms of maintaining frequency stability in the presence of step/random disturbances and PV source. The suggested method successfully keeps the frequency steady over I and Jaya+BE by 61.5% and 31.25%, respectively. In order to validate the MATLAB simulation results, real-time simulation tests are given utilizing a PC and a QUARC pid_e data acquisition card., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2023 Ewias et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

The operation of the system's frequency can be strongly impacted by load change, solar irradiation, wind disturbance, and system parametric uncertainty. In this paper, the application of an adaptive controller based on a hybrid Jaya-Balloon optimizer (JBO) for frequency oscillation mitigation in a single area smart μG system is studied. The proposed adaptive control approach is applied to control the flexible loads such as HPs and EVs by using the JBO which efficiently controls the system frequency. The suggested technique uses the power balance equation to provide a dynamic output feedback controller. The main target is to regulate the frequency and power of an islanded single area μG powered by a PV and a diesel generator with integrations of smart bidirectional loads (HPs and EVs) that are controlled by the proposed adaptive controller in presence of electrical random loads. Moreover, the JBO is designed to minimize the effect of the system load disturbance and parameter variations. For a better assessment, the proposed controller using JBO technique is compared with two other methods which are the coefficient diagram method (CDM) and adaptive one using classical the Jaya technique. In the obtained results, the frequency deviation is found as 0.0015 Hz, which is fully acceptable and in the range of the IEEE standards. The MATLAB simulation results reveal that the suggested technique has a substantial advantage over other techniques in terms of frequency stability in the face of concurrent disturbances and parameter uncertainties. The real-time simulation tests are presented using a dSPACE DS1103 connected to another PC via QUARC pid_e data acquisition card and confirmed the MATLAB simulation results., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2023 Ewais et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

The voltage quality (VQ) index has become a significant measure of recent power system stability. The integration of photovoltaic (PV) systems plus smart home loads (SHLs) at low voltage levels (LVLs) has resulted in various issues such as harmonics rise and voltage instabilities as a result of faults and systems nonlinearity. In this work, a dynamic voltage resistor (DVR) is implemented to enhance VQ, and its dynamic performance hinges on its control system ability. To enhance the DVR's control system, for surpassing nonstandard voltage with a quick response and harmonics reduction at LVL under harsh operating events, an optimal controller design using the Harris Hawks algorithm (HHA) is proposed. To verify the value of the suggested solution, the hard operating events (voltage sag, voltage swell, fluctuating voltage, and imbalanced voltage) are examined and assessed. To show the effectiveness of the HHA technique, a comparison of the % total harmonic distortion (THD) reductions achieved by the suggested and conventional controllers of DVR is conducted for the scenarios under study. Moreover, the suggested controller stability is analyzed and assessed using Lyapunov's function. The benefits of the optimized controller system are inferred from the results, including their robustness, simplicity, efficient harmonic rejection, minimal tracking error, quick response, and sinusoidal reference track. The results of the simulation show that the DVR's optimized controller is efficient and effective in maintaining a voltage at the needed level with low THD, safeguarding the sensitive load as expected, and showing a noticeable improvement in voltage waveforms. The mathematical modeling of HHA, PV system, DVR, and SHLs are all verified using MATLAB\Simulink. [ABSTRACT FROM AUTHOR]