Search

In a chiller plant, primary or critical sensors are used to control the system operation while secondary sensors are installed to monitor the performance/health of individual equipment. Current sensor fault detection and diagnosis (SFDD) approaches are not applicable to secondary sensors which usually are not involved in the system control. Consequently, a hybrid multiple sensor fault detection, diagnosis and reconstruction (HMSFDDR) algorithm for chiller plants was developed. Machine learning and pattern recognition were used to predict the primary sensor faults through the comparison of the weekly performance curves. With the primary sensor signals reconstructed, the secondary sensor faults were estimated based on mass and energy balance. By applying the algorithm with various logged plant data and comparison with site checking results, a maximum of 75% effectiveness could be achieved. The merits of the present approach were further justified through off-site sensor testing which reinforced the usefulness of proposed HMSFDDR algorithm. [ABSTRACT FROM AUTHOR]

Partial discharge (PD) detection plays a vital role in on-line condition monitoring of electrical apparatus in the power systems. However, the noise of PD measurements significantly degrades the performance of detection algorithms. In this paper, we focus on developing an adaptive filtering technique for the PD denoising problem. Heretofore, there are just a few literature reviews addressing the PD denoising based on such a method. The proposed recursive continuous S-shaped (RCSS) algorithm integrates the advantages of recursive strategy and continuous S-shaped function into adaptive noise cancellation (ANC) system, yielding enhanced filtering performance. The proposed algorithm can tackle PD noises in both Gaussian and impulsive scenarios, which is easy to implement in practical applications. The convergence behavior is also analyzed. Extensive simulation and experimental results confirm that the proposed algorithm can address polluted PD pulses, even in excessively noisy conditions, resulting in smaller mean square error (MSE) as compared to other state-of-the-art algorithms. [ABSTRACT FROM AUTHOR]

The onsite partial discharge (PD) detection of cable insulation is of great importance for power system maintenance. To preserve more basic features of denoised PD signal, in this paper, a PD denoising by a new class of affine projection algorithm (APA) is proposed based on the high-order error power (HOEP) criterion. We propose a new affine projection least mean absolute third algorithm (APLMATA), which exploits the HOEP criterion ($p=3$) and can achieve reliable performance under Gaussian interference. We further develop a modified APLMATA (MAPLMATA) to reduce the misadjustment with moderate computational burden. Analytical models are derived for MAPLMATA for Gaussian signals. To enhance the stability of the algorithm in generalized Gaussian noise scenarios, an affine project least mean $p$ th power algorithm (APLMPA) that includes the $p$ th power dependence on the error is presented. In particular, we apply the proposed APA-based algorithms to suppress the noise from PD signal in power cables. Simulation and experimental results demonstrate the effectiveness of the proposed algorithms for system identification and PD denoising. [ABSTRACT FROM AUTHOR]

This paper investigated the performance of a regenerative heat and mass exchanger (RHMX) for indirect evaporative cooling. A numerical model for RHMX was developed and validated with experimental data from the literature. Then, a data-driven model based on artificial neural network (ANN) algorithm was presented which was derived from the simulation results generated from the numerical model. The comparison between ANN prediction and experiment data showed good prediction accuracy. The average prediction error between the predicted and tested data was around 4% based on the air temperature change across the dry channel. With the data-driven model, parametric analyses were made to investigate the performance of the RHMX under different operating conditions. Finally, a design optimisation of the extraction air ratio was conducted under different ambient conditions. It was found that the optimal extraction air ratio decreased with the ambient temperature and/or relative humidity which ranged from 0.3 to 0.36. [ABSTRACT FROM AUTHOR]

Locating the partial discharge (PD) source is one of the most effective means to locate local defects in power cable lines. The sampling rate and the frequency-dependent characteristic of phase velocity have an obvious influence on localization accuracy based on the times of arrival (TOA) evaluation algorithm. In this paper, we present a cross-correlation algorithm based on propagation distance to locate the PD source in cable lines. First, we introduce the basic principle of the cross-correlation function of propagation distance. Then we verify the proposed method through a computer simulation model and investigate the influences of propagation distance, sampling rate, and noise on localization accuracy. Finally, we perform PD location experiments on two 250 m 10 kV XLPE power cables using the oscillation wave test system. The simulation and experiment results indicate that compared with traditional TOA evaluation methods, the proposed method has superior locating precision. [ABSTRACT FROM AUTHOR]