Search

Unlike conventional microelectromechanical systems (MEMS), machines based on gallium liquid metal alloys rely on Marangoni flows to induce motion without mechanical moving parts. Despite this advantage, currently developed liquid metal enabled robotic systems still need the locomotion of liquid metal droplets, thereby generating weak actuating forces and limiting their manoeuvrability. Here, a liquid metal engine (LME) is created to work as a jet thruster to continuously power a robot boat without the need of locomotion. In addition, the engine is electrically driven by surface tension without any mechanical moving parts. The structural design and the parameters of operation of the LME are investigated and optimized. Finally, the manipulation of the LME using a motor control unit is demonstrated for driving an untethered robot boat to realize complex locomotion with the precise control over the direction and speed. Thus, this LME could offer new opportunities for developing high‐performance liquid metal machines to power robotic systems. [ABSTRACT FROM AUTHOR]

Microdroplets of gallium-based liquid metal alloys have enabled various applications in the fields of biomedicine, electronics, and chemistry. However, due to the high surface tension of liquid metal, high-throughput production of uniformly sized liquid metal microdroplets is challenging using conventional acoustic or microfluidic methods. Here, adapting the submerged electrodispersion technique that has conventionally been used for generating water-based microdroplets, we develop a simple and straightforward platform for the high-throughput production of near-monodisperse (coefficient of variation less than 5%) liquid metal microdroplets in oil without using microfluidic devices. We demonstrate the capabilities of this method for producing liquid metal microdroplets (diameters ranging from tens to hundreds of micrometers) and introduce a spinning disk to induce a flow of oil phase for preventing the coalescence of the microdroplets. The simplicity and remarkable abilities demonstrated for this method may pave the path for the development of future innovative applications based on liquid metal microdroplets. [ABSTRACT FROM AUTHOR]

Biopotential signals, like electrocardiography (ECG), electromyography (EMG), and electroencephalography (EEG), can help diagnose cardiological, musculoskeletal and neurological disorders. Dry silver/silver chloride (Ag/AgCl) electrodes are commonly used to obtain these signals. While a conductive hydrogel can be added to Ag/AgCl electrodes to improve the contact and adhesion between the electrode and the skin, dry electrodes are prone to movement. Considering that the conductive hydrogel dries over time, the use of these electrodes often creates an imbalanced skin-electrode impedance and a number of sensing issues in the front-end analogue circuit. This issue can be extended to several other electrode types that are commonly in use, in particular, for applications with a need for long-term wearable monitoring such as ambulatory epilepsy monitoring. Liquid metal alloys, such as eutectic gallium indium (EGaIn), can address key critical requirements around consistency and reliability but present challenges on low viscosity and the risk of leakage. To solve these problems, here, we demonstrate the use of a non-eutectic Ga–In alloy as a shear-thinning non-Newtonian fluid to offer superior performance to commercial hydrogel electrodes, dry electrodes, and conventional liquid metals for electrography measurements. This material has high viscosity when still and can flow like a liquid metal when sheared, preventing leakage while allowing the effective fabrication of electrodes. Moreover, the Ga–In alloy not only has good biocompatibility but also offers an outstanding skin-electrode interface, allowing for the long-term acquisition of high-quality biosignals. The presented Ga–In alloy is a superior alternative to conventional electrode materials for real-world electrography or bioimpedance measurement. [ABSTRACT FROM AUTHOR]