Search

Twelve years (1991–2003) of ERS-1 and ERS-2 altimetry data have been reprocessed within the European Space Agency (ESA) reprocessing altimeter products for ERS (REAPER) project using an updated, modern set of algorithms and auxiliary models. The reprocessed data set (identified as RP01) has been cross-calibrated against the reprocessed ENVISAT V2.1 data. The format of this reprocessed data set is network common data form (version 3). The new data set shows a clear improvement in data quality beyond that of previous releases. The product validation shows reduction of the mean standard deviation of the sea-surface height differences from 8.1 (previously available product) to 6.7 cm (RP01). This paper presents the details of how the reprocessing was conducted and shows selected results from the validation and quality-assurance processes. The major improvements of the REAPER RP01 data set with respect to the previous ESA ERS radar altimetry (RA) products are due to the use of four ENVISAT RA-2 retrackers, RA calibration improvements, new reprocessed precise orbit solutions, ECMWF ERA-interim model for meteorological corrections, new ionospheric corrections, and new sea state. The intent of this paper is to aid the reader in understanding the benefits of the new data set for their particular use-case. [ABSTRACT FROM PUBLISHER]

Sea Level is a very sensitive index of climate change since it integrates the impacts of ocean warming and ice mass loss from glaciers and the ice sheets. Sea Level has been listed as an Essential Climate Variable (ECV) by the Global Climate Observing System (GCOS). During the past 25 years, the sea level ECV has been measured from space by different altimetry missions that have provided global and regional observations of sea level variations. As part of the Climate Change Initiative (CCI) program of the European Space Agency (ESA) (established in 2010), the Sea Level project (SL_cci) aimed at providing an accurate and homogeneous long-term satellite-based sea level record. At the end of the first phase of the project (2010-2013), an initial version (v1.1) of the sea level ECV has been made available to users (Ablain et al., 2015). During the second phase (2014-2017), improved altimeter standards have been selected to produce new sea level products (called SL_cci v2.0) based on 9 altimeter missions for the period 1993-2015 (https://doi.org/10.5270/esa-sea_level_cci-1993_2015-v_2.0-201612). Corresponding orbit solutions, geophysical corrections and altimeter standards used in this v2.0 dataset are described in details in Quartly et al. (2017). The present paper focuses on the description of the SL_cci v2.0 ECV and associated uncertainty and discusses how it has been validated. Various approaches have been used for the quality assessment such as internal validation, comparisons with sea level records from other groups and with in-situ measurements, sea level budget closure analyses and comparisons with model outputs. Compared to the previous version of the sea level ECV, we show that use of improved geophysical corrections, careful bias reduction between missions and inclusion of new altimeter missions lead to improved sea level products with reduced uncertainties at different spatial and temporal scales. However, there is still room for improvement since the uncertainties remain larger than the GCOS requirements. Perspectives for subsequent evolutions are also discussed. [ABSTRACT FROM AUTHOR]

Abstract: Improved orbit solutions of the European Remote Sensing Satellites ERS-1 and ERS-2 have been computed in the ITRF2005 terrestrial reference frame using the recent models based mainly on IERS Conventions 2003. These solutions cover the periods 3 August 1991 to 8 July 1996 for ERS-1, and 3 May 1995 to 4 July 2003 for ERS-2. For each satellite, the final orbit solution is based on a combination of three separate orbit solutions independently computed at the Delft Institute of Earth Observation and Space Systems (DEOS) of the Delft University of Technology (The Netherlands), the Navigation Support Office of the European Space Operations Centre (ESOC, Germany) and the Helmholtz Centre Potsdam GFZ German Research Centre for Geosciences (Germany) using three different software packages for precise orbit determination, but using the same models in the same terrestrial reference frame within the European Space Agency (ESA) project ‘Reprocessing of Altimeter Products for ERS (REAPER)’. Validation using radar altimeter data indicates that the new combined orbits of ERS-1 and ERS-2 computed by us are significantly more accurate, approaching the 2–3cm level in radial direction, than previously available orbit solutions. [Copyright &y& Elsevier]