Search

Abstract Graphene oxide (GO) is one of the most important ceramic-toughening candidates due to its outstanding physical and chemical properties. In this paper, nacre-like alumina ceramics reinforced with GO have been prepared by freeze casting followed by hot pressing. The experimental results showed that a laminated structure with homogeneous distribution of GO was obtained in the composites. Microstructural analysis, relative densities, flexural strength and fracture toughness of the samples were investigated to reveal the effect of GO. Higher flexural strength and fracture toughness (~380 MPa and ~7.5 MPa m1/2, respectively) were achieved and the multiple length-scale toughening mechanisms of composites contributed to the improved mechanical properties. The results show that it is a promising method to enhance the mechanical properties of nacre-like alumina by the addition of GO. [ABSTRACT FROM AUTHOR]

BNNSs were prepared efficiently by magnesium borate nitridation. BNNSs/eutectic-composition Al 2 O 3 /YAG/YSZ ceramics were prepared by hot pressing sintering. The addition of BNNSs did not change the phase composition of BNNSs/eutectic-composition Al 2 O 3 /YAG/YSZ ceramics. The bending strength and fracture toughness of 1.5wt%BNNSs/ eutectic-composition Al 2 O 3 /YAG/YSZ ceramic were increased by 19.0% and 18.9% respectively. Doped BNNSs exist at the grain boundary between two or more different grains. The toughening mechanism of BNNSs contains mainly crack deflection, BNNSs pullout and BNNSs bridging. • BNNSs/eutectic-composition Al 2 O 3 /YAG/YSZ ceramics were originally prepared with excellent mechanical properties. • The toughening mechanism of BNNSs was discussed. • The effects of temperature and BNNSs doping amount on the mechanical properties of ceramics were explored. [ABSTRACT FROM AUTHOR]

Alumina is one of the most commonly used and researched structural ceramic because of its excellent properties. However, its intrinsic brittleness is the fatal drawback, which hinders it from wider applications. How to improve its fracture toughness as well as the bending strength is always challenging for material researchers. In this paper, alumina matrix composites were fabricated by hot-pressing, in which some additives, including zirconia, alumina platelets, and MXene, were incorporated. The influence of the introduced additives on their microstructure and mechanical properties was investigated. Compare with the monolithic alumina, both bending strength and fracture toughness of all samples were improved greatly. Incorporation of zirconia was beneficial to the mechanical properties due to the phase-transformation strengthening and toughening mechanism. While alumina platelets resulted in high fracture toughness because of the self-toughening of elongated grains. The synergistic effect of alumina platelets and MXene enormously improved the fracture toughness from 2.9 ± 0.3 MPa·m1/2 for monolithic alumina to 7.5 ± 0.4 MPa·m1/2 for the composite, which was increased by 159%. This work will provide useful references for the fabrication of high-strength and high-toughness alumina ceramics by introducing additives properly. [ABSTRACT FROM AUTHOR]