Search

We describe a fabrication strategy for preparing yttria-stabilized zirconia nanotube (YSZ-NT) arrays embedded in porous alumina membranes by means of template-directed atomic layer deposition (ALD) technique. The individual YSZ-NTs have a high aspect-ratio of well over 120, about ~ 110 nm in diameter, and ~ 14 µm in length. Interfacing the tube arrays with porous Pt was also introduced on the basis of partial etching technique in order to construct Pt/YSZ-NTs/Pt membrane electrode assembly (MEA) structures. The resulting YSZ-NTs MEAs show a 7 mm in diameter with a roughness factor of ~ 2. Area specific resistance was measured up to 1.84 Ω cm at 400 °C using H as fuel. [ABSTRACT FROM AUTHOR]

Atomic layer deposition (ALD) not only presents a direct way to prepare nanomaterials when combined with templates, but also allows surface engineering to fine-tune the properties of the material. Here, we review recent progress in the field of nanostructured materials and devices that have been fabricated by ALD. Various materials, including semiconducting, magnetic, noble metallic, and insulating materials, can be used to form three-dimensional (3D), complex nanostructures with controlled composition and physical properties. We begin this review with ALD nanomaterials that can be prepared from porous templates with a 2D pore arrangement, such as anodic aluminum oxide, and advance toward opal structures with a 3D pore arrangement. We also discuss surface engineering by ALD on existing nanowires/nanotubes, devices, and chemical patterns that has the potential for application in high-performance transistors, sensors, and green energy conversion. Finally, we provide perspectives for future device applications that could arise from ALD nanomaterials. [ABSTRACT FROM AUTHOR]

We report, for the first time, a novel procedure for fabricating multiwall anatase TiO2nanotubes by utilizing templated atomic layer deposition synthesis in conjunction with alternating TiO2/Al2O3nanolaminate structures. [ABSTRACT FROM AUTHOR]