Search

A triazine derivative containing nitrogen and silicon (SiN) was synthesized and the SiN hybrid aerogel was covered on the surface of bamboo fiber (BF). The modified BF was identified as MBF. The MBF and ammonium polyphosphate (APP) were used to regulate the flame retardancy and mechanical properties of polylactic acid (PLA). The PLA/BF composites were investigated using limiting oxygen index (LOI), UL-94 vertical combustion, cone calorimetry, thermogravimetric analysis linked with infrared spectra (TG-IR) etc. The char residue of MBF at 800 °C is as high as 43.5 % which is 200 % more than that of BF. Incorporating 9 wt% APP generates a PLA9 which displays the UL-94 V2 rating and a LOI value of 28.0 vol%. PLA9/MBF composites display the UL-94 V0 rating and increased LOI values while PLA9/BF composites obtain the UL-94 V2 rating and decreased LOI. The MBF reduces the release of flammable gases during combustion, enhances charring ability and decreases the thermal conductivity of composites. Besides, the tensile and impact strength of PLA9/20MBF is 20 % and 37 % more than that of PLA9/20BF due to stronger interfacial adhesion. This work provides a good method to regulate the flame retardancy and mechanical properties of PLA/BF composites., Competing Interests: Declaration of competing interest We declare that we do not have any commercial or associative interest that represents a conflict of interest in connection with the work submitted., (Copyright © 2022. Published by Elsevier B.V.)

The present study aimed to clarify the effect of oxygen respiration on biotransformation of alternative electron acceptors (e.g., nitrate and sulfate) underlying the simultaneous removal of ammonium and sulfate in a single aerated sequencing batch reactor. Complete nitrification was achieved in feast condition, while denitrification was carried out in both feast and famine conditions when aeration intensity (AI) was higher than 0.22 L/(L·min). Reactors R1 [0.56 L/(L·min)], R2 [0.22 L/(L·min)], and R3 [0.08 L/(L·min)] achieved 72.39% sulfate removal efficiency in feast condition, but H 2 S release occurred in R3. Following exogenous substrate depletion, sulfate concentration increased again and exceeded the influent value in R1, indicating that sulfate transformation was affected by oxygen intrusion. Metagenomic analysis showed that a higher AI promoted sulfate reduction by switching from dissimilatory to assimilatory pathway. Lower AI-acclimated microorganisms (R3) produced H 2 S and ammonium, while higher AI-acclimated microorganisms (R1) accumulated nitrite, which confirmed that biotransformation of N and S was strongly regulated by redox imbalance driven by aeration. This implied that respiration control, a microbial self-regulation mechanism, was linked to the dynamic imbalance between electron donors and electron acceptors. Aerobic nitrate (sulfate) reduction, as one of the effects of respiration control, could be used as an alternative strategy to compensate for dynamic imbalance, when supported by efficient endogenous metabolism. Moderate aeration induced microorganisms to change their energy conservation and survival strategy through respiration control and inter-genus protection of respiratory activity among keystone taxa (including Azoarcus in R1, Thauera in R2, and Thiobacillus, Ottowia, and Geoalkalibacter in R3) to form an optimal niche in response to oxygen intrusion and achieve benign biotransformation of C, N, and S without toxic intermediate accumulation. This study clarified the biotransformation mechanism of ammonium and sulfate driven by aeration and provided theoretical guidance for optimizing existing aeration-based techniques., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2021. Published by Elsevier B.V.)

This study focused on using pH as a single indicator to evaluate/control the performance of the nitritation system under the influence of three major operational parameters, and a total of fifteen batch tests were conducted. Results indicated that there were important interactions among different operational parameters and pH in the nitritation system; it was possible to propose the optimal nitritation operation scheme to compensate for negative changes in operational parameters. The optimal carbon to nitrogen (C/N) ratio was kept at 2.0 to ensure efficient removal of ammonium. The reaction time was the lowest (150 min) with the temperature = 20 °C, C/N = 0, and sludge/water ratio = 1:1. However, the C/N ratio could be adjusted to close to zero by reducing the temperature to about 10 °C, weakening the heterotrophic bacteria, and supplying sufficient biomass. The C/N ratio and sludge/water ratio could also be set at 4.0 and 1:3 respectively to deal with the impact of low temperature and organic matter. Results of this study might be useful to explain the optimal conditions and process control schemes with pH as a single indicator.

The effect of glucosamine analogues (glucosamine and acetylglucosamine) and free ammonium on the formation of 4-methylimidazole (4-MeI) was investigated in the caramel model reaction systems. Methylglyoxal (MGO) was detected after derivatization by high-performance liquid chromatography with a diode array detector (HPLC-DAD). 4-MeI in the Maillard reaction was tested using a high-performance cation exchange chromatography coupled with APCI-MS (HPCEC-MS). The levels of pyrazines tested by gas chromatography (GC) coupled with MS were applied to mark the condensation reaction between dicarbonyls and free ammonium. Results showed that the formation of 4-MeI and its precursor MGO was inhibited in glucosamine analogue model reaction systems. Besides, the results from pyrazines and brown intensity in glucosamine analogues model reaction systems indicated that glucosamine analogues mainly underwent the reaction of intra-intermolecular polymerization into melanoidins rather than the degradation reaction into MGO. Using glucosamine analogues to produce the caramel color with a low level of 4-MeI was applicable.

Anaerobic ammonium oxidation (anammox) has been proved to be a promising nitrogen removal method for treating ammonium-rich wastewater. However, because of the low-growth rate of anammox bacteria, maintenance of a sufficient amount of anammox biomass in reactor became a key factor in application. Gel immobilization is an efficient method to prevent biomass from being washed out and to promote hyper-concentrated cultures. This study focused on a nitrogen removal process by anammox enrichment culture immobilized in polyvinyl alcohol and sodium alginate (PVA-SA) gel beads. The rapid startup of reactor demonstrated that gel entrapment was supposed to be a highly effective technique for immobilizing anammox bacteria. The anammox bacteria present in the enrichment were identified to be Jettenia-like species (>98%). Moreover, the effect of hydraulic retention time (HRT), pH, and temperature on immobilized anammox processes were investigated. The effect of pH and temperature on the anammox process was evidently weakened in PVA-SA immobilized gel beads, however, the effect of HRT on the anammox reaction was enhanced. Therefore, a stable operated reactor could be obtained in an anaerobic sequencing batch reactor, which proved gel immobilization was an excellent method to maintain the biomass in anammox reactor for application.