Search

Background: For preclusion of remnants after aneurysm clipping, a reliable, noninvasive imaging technique is desirable., Objective: To evaluate the reliability of optimized angiographic computed tomography with intravenous contrast agent injection (ivACT) in detecting remnants after aneurysmal clipping compared with digital subtraction angiography (DSA), the gold standard., Methods: We included 84 patients with 112 clipped cerebral aneurysms of the anterior circulation. For treatment, 116 clips of cobalt and 57 clips of titanium alloy were used. In each patient, we performed an ivACT with dual rotational acquisition and a DSA. Data from ivACT were postprocessed with a dual-volume technique with newly implemented reconstructions modes. Aneurysm remnants were measured, classified, and correlated with DSA by 2 raters., Results: In total, 12 remnants were revealed by DSA, meaning a prevalence of 11%. IvACT demonstrated a sensitivity of 75% to 92% and a specificity of 99% in detecting remnants up to a minimal size of 0.7 × 0.3 mm. Classification of remnants by ivACT was identical to that by DSA, and assessment of size showed a significant correlation with DSA (P < .001). No significant differences between cobalt and titanium alloy were revealed concerning artifacts., Conclusion: Optimized ivACT with enhanced postprocessing demonstrated high sensitivity and specificity in detecting remnants after aneurysm clipping in the anterior circulation. Classification and assessment of remnant size and detection of relevant parent artery stenosis showed high accuracy of ivACT compared with DSA. Our results indicate that ivACT might become a noninvasive alternative to DSA for postsurgical control.

Objective: We tested the hypothesis that Flat Detector computed tomography (FD-CT) with intravenous contrast medium would allow the calculation of whole brain cerebral blood volume (CBV) mapping (FD-CBV) and would correlate with multislice Perfusion CT (PCT)., Methods: Twenty five patients were investigated with FD-CBV and PCT. Correlation of the CBV maps of both techniques was carried out with measurements from six anatomical regions from both sides of the brain. Mean values of each region and the correlation coefficient were calculated. Bland-Altman analysis was performed to compare the two different imaging techniques., Results: The image and data quality of both PCT and FD-CBV were suitable for evaluation in all patients. The mean CBV values of FD-CBV and PCT showed only minimal differences with overlapping standard deviation. The correlation coefficient was 0.79 (p < 0.01). Bland-Altman analysis showed a mean difference of -0.077 ± 0.48 ml/100 g between FD-CBV and PCT CBV measurements, indicating that FD-CBV values were only slightly lower than those of PCT., Conclusion: CBV mapping with intravenous contrast medium using Flat Detector CT compared favourably with multislice PCT. The ability to assess cerebral perfusion within the angiographic suite may improve the management of ischaemic stroke and evaluation of the efficacy of dedicated therapies.

Introduction: The use of self-expandable microstents for treatment of broad-based intracranial aneurysms is widely spread. However, poor fluoroscopic visibility of the stents remains disadvantageous during the coiling procedure. Flat detector angiographic computed tomography (ACT) provides high resolution imaging of microstents even though integration of this imaging modality in the neurointerventional workflow has not been widely reported., Methods: An acrylic glass model was used to simulate the situation of a broad-based sidewall aneurysm. After insertion of a self-expandable microstent, ACT was performed. The resulting 3D dataset of the Microstent was subsequently projected into a conventional 2D fluoroscopic roadmap. This 3D visualization of the stent supported the coil embolization procedure of the in vitro aneurysm., Results: In vitro 2D-3D coregistration with integration of 3D ACT data of a self-expandable microstent in a conventional 2D roadmap is feasible., Conclusions: Unsatisfying stent visibility constrains clinical cases with complex parent vessel anatomy and challenging aneurysm geometry; hence, this technique potentially may be useful in such cases. In our opinion, the clinical feasibility and utility of this new technique should be verified in a clinical aneurysm embolization study series using 2D-3D coregistration.

Computational fluid dynamic (CFD) based on patient-specific medical imaging data has found widespread use for visualizing and quantifying hemodynamics in cerebrovascular disease such as cerebral aneurysms or stenotic vessels. This paper focuses on optimizing mesh parameters for CFD simulation of cerebral aneurysms. Valid blood flow simulations strongly depend on the mesh quality. Meshes with a coarse spatial resolution may lead to an inaccurate flow pattern. Meshes with a large number of elements will result in unnecessarily high computation time which is undesirable should CFD be used for planning in the interventional setting. Most CFD simulations reported for these vascular pathologies have used tetrahedral meshes. We illustrate the use of polyhedral volume elements in comparison to tetrahedral meshing on two different geometries, a sidewall aneurysm of the internal carotid artery and a basilar bifurcation aneurysm. The spatial mesh resolution ranges between 5,119 and 228,118 volume elements. The evaluation of the different meshes was based on the wall shear stress previously identified as a one possible parameter for assessing aneurysm growth. Polyhedral meshes showed better accuracy, lower memory demand, shorter computational speed and faster convergence behavior (on average 369 iterations less).

Copyright of Strahlentherapie und Onkologie is the property of Springer Nature and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Background: C-arm flat panel computed tomography angiography (CA-CTA) is a relatively new imaging modality. Consequently, knowledge about postprocessing parameters and their influence on image quality is still limited, especially for the visualization of implanted microstents.Purpose: To optimize reconstruction parameters by evaluating the influence of these different parameters for CA-CTA visualization of microstents in an animal model.Material and Methods: Eleven microstents were implanted within the left common carotid artery of 11 New Zealand white rabbits. Both CA-CTA, using intra-venous delivery of contrast material, and conventional digital subtraction angiography (DSA) was performed. CA-CTA datasets were reconstructed using three different image characteristics (normal, sharp, smooth). Two experienced neuroradiologists evaluated the image quality and performed measurements of inner and outer stent diameters as well as measurements of the lumen area.Results: Stent deployment was performed successfully in all animals. Inter-observer correlation coefficient for all measurements was high (r = 0.87-0.92). Lumen area and inner stent diameter were significantly smaller in image characteristic "smooth" (P < 0.01) than in "sharp" and "normal". Outer stent diameter was larger in "smooth" than in "sharp" and "normal" (P < 0.01). Stent strut size was significantly wider using image characteristic "smooth". "Sharp" and "normal" compared best to DSA, with "sharp" providing the closest match to DSA measurements, with the trade-off of significantly more noise than in the "normal" reconstructions.Conclusion: The use of different image characteristics in the postprocessing of CA-CTA datasets has an influence on the visualization of implanted stents. Image characteristic "sharp" and "normal" compared best to DSA. [ABSTRACT FROM AUTHOR]

We compared flat-detector computed tomography angiography (FD-CTA) to multislice computed tomography (MS-CTA) and digital subtracted angiography (DSA) for the visualization of experimental aneurysms treated with stents, coils or a combination of both.In 20 rabbits, aneurysms were created using the rabbit elastase aneurysm model. Seven aneurysms were treated with coils, seven with coils and stents, and six with self-expandable stents alone. Imaging was performed by DSA, MS-CTA and FD-CTA immediately after treatment. Multiplanar reconstruction (MPR) was performed and two experienced reviewers compared aneurysm/coil package size, aneurysm occlusion, stent diameters and artifacts for each modality.In aneurysms treated with stents alone, the visualization of the aneurysms was identical in all three imaging modalities. Residual aneurysm perfusion was present in two cases and visible in DSA and FD-CTA but not in MS-CTA. The diameter of coil-packages was overestimated in MS-CT by 56% and only by 16% in FD-CTA compared to DSA (p < 0.05). The diameter of stents was identical for DSA and FD-CTA and was significantly overestimated in MS-CTA (p < 0.05). Beam/metal hardening artifacts impaired image quality more severely in MS-CTA compared to FD-CTA.MS-CTA is impaired by blooming and beam/metal hardening artifacts in the visualization of implanted devices. There was no significant difference between measurements made with noninvasive FD-CTA compared to gold standard of DSA after stenting and after coiling/stent-assisted coiling of aneurysms. FD-CTA may be considered as a non-invasive alternative to the gold standard 2D DSA in selected patients that require follow up imaging after stenting. [ABSTRACT FROM AUTHOR]

ABSTRACT BACKGROUND AND PURPOSE The aim of our study was to evaluate flat detector computed tomography angiography with peripheral intravenous contrast material application (FD-CTA) for visualization of cerebral arteries in comparison with intravenous multidetector computed tomography angiography (CTA) and intraarterial digital subtraction angiography (DSA). METHODS The study was approved by the local institutional review board and informed consent was obtained by all participants. Ten patients underwent FD-CTA, CTA, and DSA of the cerebral arterial vasculature for suspected cerebrovascular disease. The image data were evaluated by two readers in consensus for the visualization of cerebral arterial segments on a 5-point scale (0 = vessel cannot be distinguished; 4 = excellent image quality). The Wilcoxon signed-rank test was used for statistical analysis. Note that P < .05 was considered to indicate a significant difference. RESULTS The depiction of cerebral arterial segments with FD-CTA was significantly superior compared to CTA in most vessel segments ( P < .05 in 20 of 23 anatomic regions) and was without significant difference compared with DSA in large and medium intracranial vessels. CONCLUSIONS The results suggest that the cerebral arteries can be visualized by FD-CTA in high resolution, in many vessel segments comparable to DSA. [ABSTRACT FROM AUTHOR]

Background: Quantifiable parameters to evaluate the effectiveness of flow diverters (FDs) are desirable. We measured time-density curves (TDCs) and calculated quantifiable parameters in the rabbit elastase-induced aneurysm model after stent (Neuroform [NF]) and FD (Pipeline embolisation device [PED]) treatment. Methods: Sixteen rabbit elastase-induced aneurysms were treated with FD ( n = 9) or NF ( n = 5). Angiography was performed before and after treatment and TDCs were created. The time to peak (TTP), the full width at half maximum (FWHM) and the average slope of the curve which represent the inflow (IF) and outflow (OF) were calculated. Results: Mean values before treatment were TTP = 0.8 s, FWHM = 1.2 s, IF = 153.5 and OF = −54.9. After PED treatment, the TTP of 1.8 s and FWHM of 47.8 s were extended. The IF was 31.2 and the OF was -11.5 and therefore delayed. The values after NF treatment (TTP = 1.1 s, FWHM = 1.8 s, IF = 152.9, OF = −33.2) changed only slightly. Conclusion: It was feasible to create TDCs in the rabbit aneurysm model. Parameters describing the haemodynamic effect of PED and NF were calculated and were different according to the type of device used. These parameters could possibly serve as predictive markers for aneurysm occlusion. Key Points: • Detachable coils are now widely used instead of surgery for intracranial aneurysms • Time-density curves of aneurysms can indicate effectiveness in reducing intra-aneurysmal flow • Time-density curves can now be measured by a prototype software • Time-density curves after treatment with a flow diverter or a conventional stent are different • Parameters of the time-density curves can be calculated and may serve as predictive parameters [ABSTRACT FROM AUTHOR]

Background: Despite limited soft tissue resolution flat-detector computed tomography (FD-CT) provides substantial superior spatial resolution in comparison with multislice computed tomography (MS-CT). This may add value in the visualization of small vascular structures if intravenous contrast application leads to substantial opacification and visibility of intracranial vessels or aneurysms. Purpose: To evaluate the feasibility of visualization of vascular structures by FD-CT angiography (FD-CTA) after intravenous contrast injection compared with MS-CTA and intra-arterial digital subtracted angiography (IADSA) in an animal model. Material and Methods: Aneurysms were created in the right common carotid artery in six New Zealand White Rabbits using the elastase technique. Imaging was performed using FD-CTA, MS-CTA (injection of 1 ml/kg body weight) and IADSA. Anonymized volume rendering reconstruction (VRT), maximum intensity projection (MIP), and multiplanar reconstruction (MPR) images were reconstructed and evaluated by two experienced reviewers for aneurysm geometry and vascular structure anatomy using standard tools of a dedicated workstation. Results: Aneurysms could be successfully created in all animals. Measurements of aneurysm geometry (aneurysm height, width, neck width) and vascular structures (brachiocephalic trunk, carotid artery diameter and plane) were nearly identical in all three modalities. Intra- and inter-observer correlations of the different parameters showed high r values between 0.83 and 0.99. Conclusion: Our results show the feasibility of FD-CTA in comparison with MS-CTA and IADSA in an animal model. Despite limited soft tissue resolution, opacification of vascular structures with sufficient contrast to the surrounding structures was possible in all animals. Vascular structures appeared better delineated in FD-CTA than in MS-CTA, probably due to the superior spatial resolution. [ABSTRACT FROM AUTHOR]