Search

An in-plane elasto-plastic material model and a hygroexpansivity-shrinkage model for paper and board are introduced in this paper. The input parameters for both models are fiber orientation anisotropy and dry solids content. These two models, based on experimental results, could be used in an analytical approach to estimate, for example, plastic strain and shrinkage in simple one-dimensional cases, but for studies of the combined and more complicated effects of hygro-elasto-plastic behavior, a numerical finite element model was constructed. The finite element approach also offered possibilities for studying different structural variations of an orthotropic sheet as well as buckling behavior and internal stress situations under local strain differences. A few examples are presented of the effect of the anisotropy and moisture streaks under stretching and drying conditions on strain differences and buckling. The internal stresses were studied through a case in which the drying of different layers occurred at different stages. Both the anisotropy and moisture streaks were capable of rendering the buckling of the sample visible. The permanency of these defects highly depends on several process stages and tension conditions of the sheet, as demonstrated in this paper. The application possibilities of the hygro-elasto-plastic model are diverse, including investigation into several phenomena and defects appearing in drying, converting and printing process conditions. [ABSTRACT FROM AUTHOR]

Abstract: The rheological nature of paper or board is usually treated either as elasto-plastic or as viscoelastic depending on the studied paper making process or behavior in converting and end use. In this paper we study several stress–strain curve models and the determination of material parameters from an elasto-plastic point of view. Finally, a suitable approach for all stress–strain curves measured from 180 strips is constructed using a linear function for an elastic region and a nonlinear function for a strain hardening region. This model determines a proportional limit (elastic limit) and gives fairly elegant dependencies between material/fitting parameters and two important factors of mechanical properties of paper: dry solids content and anisotropy. In this paper the dependency of a plastic strain on dry solids content and anisotropy is estimated using the introduced stress–strain curve model. Correspondingly, the model can be used to estimate many other mechanical behaviors, for example, the tension differences arising from non-uniform moisture content of the paper web profile. However, the main target of this study is to produce competent parameters based on modeled stress–strain curves for further construction of a material model. This elasto-plastic material model will be utilized in out-of-plane deformation and fracture models. [Copyright &y& Elsevier]