Search

Protonic ceramic ethane fuel cells fed by hydrocarbon fuels are demonstrated to be effective energy conversion devices. However, their practical application is impeded by a lack of anode materials combining excellent catalytic activity with good chemical stability and anti‐carbon deposition properties. In this work, in which Sr2Fe1.5Mo0.5O6‐δ (SFM) double perovskite oxide is used as the matrix framework, catalytic activity toward H2 and C2H6 oxidation is systematically investigated using Ba‐doping. It is found that the concentration of the oxygen vacancy is gradually improved with increased Ba content to significantly enhance catalytic activity toward H2 and C2H6 oxidation. From the series studied, Ba0.6Sr1.4Fe1.5Mo0.5O6‐δ exhibits the highest catalytic activity, while the power densities of the electrolyte‐supported Ba0.6SFM/BaCe0.7Zr0.1Y0.2O3‐δ (BCZY)/La0.58Sr0.4Co0.2Fe0.8O3‐δ (LSCF)‐Sm0.2Ce0.8O2‐δ (SDC) single cell reach 205 and 138 mW cm–2 at 750°C in H2 and C2H6, respectively. The ethane conversion rate of the experimental cell is shown to reach 38.4%, while simultaneously maintaining ethylene selectivity at 95%. Furthermore, the single cell exhibits no significant attenuation during stable operation for 20 h, as well as demonstrating excellent anti‐coking performance. The proposed results suggest that Ba0.6Sr1.4Fe1.5Mo0.5O6‐δ represents a promising anode material for efficient hydrocarbon‐related electrochemical conversion to realize the coproduction of ethylene and power in protonic ceramic ethane fuel cells. [ABSTRACT FROM AUTHOR]

A La 0.5 Sr 0.5 Fe 0.9 Mo 0.1 O 3-δ -CeO 2 (LSFM-CeO 2) composite was prepared by impregnating CeO 2 into porous La 0.5 Sr 0.5 Fe 0.9 Mo 0.1 O 3-δ perovskite and was used as an anode material for proton-conducting solid oxide fuel cells (SOFCs). The maximum power densities of the BaZr 0.1 Ce 0.7 Y 0.2 O 3-δ (BZCY) electrolyte-supported single cell with LSFM-CeO 2 as the anode reached 291 mW cm−2 and 190 mW cm−2 in hydrogen and ethane fuel at 750 °C, respectively, which are significantly higher than those of a single cell with only LSFM as the anode. Additionally, the ethylene selectivity and ethylene yield from ethane for the fuel cell at 750 °C were as high as 93.4% and 37.1%, respectively. The single cell also showed negligible degradation in performance and no carbon deposition during continuous operation for 22 h under an ethane fuel atmosphere. The improved electrochemical performance due to the impregnation of CeO 2 can be a result of enhanced electronic and ionic conductivity, abundant active sites, and a broad three-phase interface in the resultant composite anode. The LSFM-CeO 2 composite is believed to be a promising anode material for proton-conducting SOFCs for co-producing electricity and high-value chemicals from hydrocarbon fuels. [ABSTRACT FROM AUTHOR]

A layered Mo doped Pr 0.5 Ba 0.5 MnO 3−δ (Mo-PBMO) double perovskite oxide was prepared by a modified sol–gel method and the properties of the fabricated material are characterized by various technologies. The results of X-ray diffraction (XRD), H 2 -temperature programmed reduction (H 2 -TPR), NH 3 -temperature programmed desorption (NH 3 -TPD), and thermogravimetric analysis (TGA) demonstrate that the treatment in reducing atmosphere at high temperature lead to a significant phase transformation of the material to a single cubic phase as well as with the Mo in multiple oxidized states. Such character leads to the production of large amount of oxygen deficiency with facilitated oxygen diffusion. The electrochemical performance tests of half-cell and single cell SOFCs exhibit the promoted effect of Mo on catalytic activity for the oxidation of H 2 and CH 4 , indicating that Mo-PBMO could serve as an anode material candidate for SOFCs. [ABSTRACT FROM AUTHOR]