Search

A three-dimensional (3-D) model for multispecies vacuum arc considering ionization and recombination process has been built in this article. With the model, the arc behaviors and species characteristics subjected to actual spatial magnetic fields of cup-shaped axial magnetic field (AMF) contact and transverse magnetic field-axial magnetic field (TMF-AMF) contact are investigated and compared. Furthermore, the validity of the model is verified by comparing with the experiments. Simulation results show that contact structures affect the species distributions of the arc by changing magnetic field and current density distributions. More triple charged ions are generated through ionization under higher electron temperature so that the triple charged ions gather where current constricts. The heat flux density is large in the current contraction region, where the contribution from triple charged ions is large as well. Spatial magnetic field distribution affects the Lorentz force acting on ion components. The force distribution is relatively uniform and the species are subject to inward force on the arc edge under cup-shaped AMF contact. For TMF-AMF contact, the double charged ions are subject to the force pointing to the TMF contact arms, whereas the triple charged ions are subject to the force pointing to the arc center. In addition, the consideration of arc species can improve the accuracy of the simulation results of the heat flux distribution, leading to a good agreement of the erosion condition between experiments and simulation. [ABSTRACT FROM AUTHOR]

Modeling and numerical simulation is an important tool for the research of the physical mechanisms of the vacuum arc (VA). Compared with the experiments of the VA, numerical simulation is more efficient and economical. Axial magnetic fields (AMFs) are also the most popular control technology in vacuum interrupters and other application fields. First, the model of VA was reviewed from a relatively simple zero-order one to 2-D one, and then a 3-D one, which gives us a more comprehensive understanding of VA. Second, the influence of spatial distribution of magnetic fields on VA behavior is also studied. VA behavior under different commercial AMF contacts was simulated and compared based on 3-D magnetohydro-dynamic model. Influence of the radial slots and magnetic field generated by adjacent phase and bus bar on arc characteristics has been reviewed. Third, the VA modeling with active anode is reviewed and discussed. Anode vapor can cool arc plasma, and leads to changed distribution of current density and plasma parameters. Model and simulation technology of anode activity have also been reviewed in this paper, from 1-D, 2-D, to 3-D, and then the deformation of anode melting pool is considered. Deformation of anode melting pool will make anode temperature more reasonable. Finally, the challenge and research direction of VA modeling is also given and discussed. [ABSTRACT FROM AUTHOR]

Vacuum interrupter is widely used in the medium-voltage power system. Controlling the arc by the magnetic field is an effective method to improve the breaking capacity. The transverse magnetic field (TMF) forces the constricted arc to rotate to reduce local overheating. In this paper, three kinds of TMF contacts, which are Swastika-type contact, cup-shaped contact, and double-TMF contact that combines Swastika-type and cup-shaped contacts coaxially, are investigated in a demountable vacuum chamber with a high-speed camera. The arc voltage and current are also recorded. The experiments were conducted with circuit currents from 5 to 20 kA (root mean square) with a frequency of 50 Hz. There are four current levels in the experiment, which are 5, 10, 15, and 20 kA, and at least three tests are taken for each current level. The results showed that under low current (I = 10 kA), the arc of the three TMF contacts did not rotate. Under high current (I = 20 kA), it was observed that the arc of Swastika-type and double-TMF contacts rotated in the gap. The arc speed of double-TMF contacts is higher than that of Swastika-type contacts. The cup-shaped contacts have the highest arc voltage and noise among the three TMF contacts. The Swastika-type contacts were eroded most seriously. The simulation results show the force distribution of the arc on different locations. The resultant force makes the arc rotate counterclockwise. [ABSTRACT FROM AUTHOR]

Using magnetic fields to control the vacuum arc is a major way to improve the breaking capacity of vacuum interrupters. Besides the single transverse magnetic field (TMF) and single axial magnetic field (AMF), new type of TMF-AMF contact and TMF-TMF contact structures have been put forward to control the vacuum arc in recent years. In this paper, three different structural contacts are used in the experiments. The arc evolution was captured by an high-speed digital video camera, and at the same time, the arc current and arc voltage wave were recorded. The experiment was conducted under current ranging from 5 to 20 kA (root mean square) and 10 mm of gap distance. There are 12 current shots performed on one contact design. There are four current levels in the experiment which are 5, 10, 15, and 20 kA, and three tests are taken for each current level. The results showed that for TMF-AMF contacts, under low current (I = 5 or 10 kA), the arcs of the two kinds of contacts both kept diffused and rotating. Under high current (I = 20 kA), the arc of the TMF-AMF contact with six slots was constricted and rotated on the plate, and the melting was uniform and slight. As for the eight-slot contacts, the arc was constricted but did not rotate which resulted in significant melting in the local region. As for TMF-TMF contacts, the result is similar under low current, while the arc was constricted and rotated quickly on the inner plate under high current. The simulation results show that when the arc core is located on the outer plate; the total Lorentz force is near zero. When the arc core is located on the inner plate, the direction of total force is counterclockwise. [ABSTRACT FROM AUTHOR]

In order to improve the breaking capacity of contacts, it is very important to find a better contact material. In this paper, the triggering experiments of plate contact with different materials are studied to investigate the characteristics of vacuum arc. The current range is from 1 to 9 kA (rms). The gap distance is selected as 3 and 5 mm. The arc appearance and the behavior of cathode spots are captured by high-speed camera with an exposure time of $2~\mu \text{s}$. The surface topography of contacts after experiments is evaluated by scanning electron microscope. The arc current and arc voltage are measured at the same time by Rogowski coil and high-voltage probe. The diameter of the contact is 25 mm. There are seven kinds of materials (CuCr10, CuCr25, CuCr30, CuCr40, WCu10, WCu30, and CuW–WC) conducted in this paper. Compared with the experimental results, the arc of WCu alloy distributes more evenly on the contact plane with many bright cathode spots. The small gap distance makes the burning point more fixed. The arc of CuW–WC is unstable. During the arc trigger moment to the arc stable burning stage, the radial diffusion velocity of WCu10 cathode spot is the lowest with about 25% of CuCr10. CuCr10 alloy has the worst melting resistance. WCu alloy has good melting resistance and bad toughness. The toughness of CuW–WC is even worse. Under the low current, CuCr30 might be preferred for vacuum interrupters from the cathode spots’ radial diffusion speed, arc appearance, and erosion result. When the current increasing, the arc can easily spread to the entire surface of WCu contact, and WCu10 would be the prefer material with the diffusion arc and good erosion resistance. [ABSTRACT FROM AUTHOR]

The motion of cathode spots plays a crucial important role in removing oxide layer on a metal surface by vacuum arc. In this paper, the characteristics of the motion of a single cathode spot on metal surface with oxide layer are investigated experimentally. Experiments are conducted in a detachable vacuum chamber. A hollow copper anode with a hole of 10~\text mm \times 10 mm is used in order to observe the 2-D motion of the cathode spot. The motion of the cathode spot during the descaling process is photographed by a high-speed digital camera with an exposure time of 2~\mu \texts . Experimental results indicate that there are slow motion and fast motion of the cathode spot during descaling process, and the slow motion is the basic characteristic in most of the descaling time. The probability distribution of the cathode spot’s displacement and resident time, the average velocity, and the movement parameter S^2/t are analyzed quantitatively. The results indicate that with the increase of gap distance or the decrease of oxide layer thickness, the cathode spot becomes more active. [ABSTRACT FROM PUBLISHER]

In this paper, high-current vacuum arc (VA) breaking experiments in vacuum interrupters were conducted using two kinds of high-capacity (larger diameter) axial magnetic field (AMF) electrodes with contact gap distance changing from 10 to 40 mm. Triggering arc mode and fixed gap distance were adopted. Experimental results showed that during the initial diffusion stage, the arc voltage of high-current VA got a peak value. The change in high-current VA appearance would also affect the curve of arc voltage. With the increase of contact gap distance, the voltage of high-current VA increased and the VA near the anode appeared contracted, and its shape was changed from cylinder to cone. In the shorter gap distance, for cup electrodes, the plasma jets mix with each other and the arc column appears like a bright cone, whereas for coil electrodes, the plasma jets are clear and the column appears like a cylinder, and the transfer of arc appearance affects arc voltage distribution. Moreover, arc twist and rotation often occur under longer gap and higher current, which is due to the larger radial magnetic field component generated by AMF coils, and arc voltage appeared high-frequency and high-amplitude noise, and ultimately resulted in the distortion of the arc current in the current experimental conditions (lower charging voltage of capacitor). [ABSTRACT FROM PUBLISHER]

Trigatrons have been widely used in many fields. However, the performance of trigatrons typically degrades as operational time increases. Among many influence factors, electrode erosion is a primary cause of trigatrons failure. In this paper, the peak current and pulsewidth of trigatrons are in the order of kiloampere (kA) and microsecond (\mus) , respectively, with an electrode size in the order of millimeters (mm). The discharge images show that the arc appearance looks filamentary in shape during the early period of the discharge. As the discharge process progresses, the arc expands and moves radially to the side surface of the anode. Simultaneously, electrode erosion experiments are conducted on the trigatrons in an atmospheric environment. Experimental results show that the erosion level becomes more serious with an increase of gap distance and discharge current. The weight loss of Mo and W electrodes with erosion times are very close to a linear distribution, however, weight loss rate of W-Cu electrodes increases more dramatically with an increase of erosion times. The erosion of WCu electrode is more pronounced than Mo and W electrodes the volume erosion rate of W is smaller than Mo, but the mass erosion rate of W is higher than Mo. Many cracks always appear on the W and Mo electrode surfaces, which are due to frequent and intensive interaction between the expansion and shrinkage of the electrode material. [ABSTRACT FROM PUBLISHER]

Based on a 2-D magnetohydrodynamic model, high-current vacuum arcs (HCVAs) under axial magnetic fields (AMFs) with consideration of current density distribution at the cathode are simulated and analyzed. The current density distribution at the cathode used in the simulation is obtained by processing the image of cathode spots from experiments. In order to study the influence of current density distribution at the cathode on vacuum arc characteristics, HCVA is simulated under two kinds of current density distribution at the cathode. Then, for HCVA simulation in a half-sinusoidal period, the current density distribution at the cathode and the AMF delay are both taken into account. The simulation results show that the nonuniform current density at the cathode makes the values of the arc plasma parameters in the interelectrode region larger and their radial distribution more nonuniform than the uniform current density at the cathode. The more uniform current density at the cathode and the stronger AMF at the moments in the second 1/4 cycle make the values of the arc plasma parameters in the central region smaller and their radial distribution broader than those in the first 1/4 cycle. In addition, the simulation results will also be compared with the experimental results. [ABSTRACT FROM AUTHOR]

Removing an oxide layer on a metal surface by vacuum arc has been preliminarily used in the metallurgical industry as an environment-friendly substitutor for the traditional acid-washing technique. In this paper, the influence of protection gas pressure on descaling process is investigated experimentally. Arc images taken by a high-speed digital camera indicated that the descaling rate was closely related to the motion pattern of cathode spots in different gas pressures. The decrease of descaling rate with the increase of gas pressure could be partly attributed to the formation of cathode-spot group and its less mobility at high gas pressure. The influence of gas pressure on the power density of cathode spot was also analyzed. It seemed that higher gas pressure would lead to the decrease of the ratio of power input into the cathode spot to the total arc power, which could also contribute to the decrease of the descaling rate. [ABSTRACT FROM PUBLISHER]

Experiments on a drawn vacuum arc with forced current zero, which was formed by injection of a countercurrent with a frequency of 1 kHz, were conducted in a detachable vacuum chamber. The prospective peak main current was 3.5 kA. Arc characteristics were investigated with the aid of a high-speed digital camera with an exposure time of 2 \mu\s. In this paper, the influence of axial magnetic field (AMF) distribution and anode material on the evolution of vacuum arc in the initial expanding stage is mainly investigated. Three types of electrodes were used in the experiments. One of them was simple electrodes with butt contact plates, and the other two types were specially designed electrodes generating a conventional bell-shaped AMF profile and a saddle-shaped AMF distribution, respectively. OFHC copper and WCu10 were used as anodes for the electrodes with bell-shaped AMF. The appearance of vacuum arc in the forced current-zero stage is also investigated. [ABSTRACT FROM AUTHOR]

Based on a 3-D steady magnetohydrodynamic model, the high current vacuum arc subjected to a realistic spatial magnetic field generated by the cup-type contacts was simulated. The influence of the realistic spatial magnetic field profile on plasma's rotation behavior was analyzed. The distribution of the azimuthal velocity on anode side under realistic spatial magnetic field profile was quite different from that under uniform axial magnetic field. [ABSTRACT FROM PUBLISHER]

The anode melting in high-current vacuum arcs leads to the increase of metal vapor and liquid droplets around current zero and even the interruption failure. In our recent experiments of the cup-shaped axial magnetic field (AMF) contacts, an obvious clockwise swirl flow of the liquid copper was detected on the anode surface. However, if an additional external AMF which is reverse to the AMF generated by the contacts was introduced, the rotation direction of the liquid copper swirl flow on the anode surface could reverse to anticlockwise. These phenomena indicate that AMF has great influence on the performance of anode melting and its swirl flow. [ABSTRACT FROM AUTHOR]