Search

Frequency diverse arrays (FDAs) allow the synthesis of dot-shaped radiated patterns in the range-angle space by applying frequency offsets to the antenna elements. Conventional FDAs are usually implemented with costly variable phase shifters and mixers and require an independent feeding network per beam for multibeam operation. In this letter, we propose an innovative approach to FDA that makes use of time-modulated array (TMA) building blocks modeled with inexpensive single-pole dual-throw switches. Our approach is able to simultaneously and independently steer two dot-shaped beam patterns, over the two most significant TMA harmonics, with an almost 90% time modulation efficiency. [ABSTRACT FROM AUTHOR]

In this letter, sinusoidal pulsewidth modulation (PWM) is applied to the design of time-modulated arrays (TMAs). The array excitations are modulated using PWM-synthesized sine waveforms. This provides increased signal bandwidth, excellent rejection of the undesired harmonics, and modulation efficiencies aligned with the best ones in the literature. The simplicity of the technique allows for an easily implementable antenna array feeding network. [ABSTRACT FROM AUTHOR]

Time-modulated arrays (TMAs) can effectively perform beamsteering over the first positive harmonic pattern by applying progressively delayed versions of stair-step approximations of a sine waveform to the antenna excitations. In this letter, we consider synthesizing such stair-step sine approximations by means of Haar wavelets. Haar functions constitute a complete orthonormal set of rectangular waveforms, which have the ability to represent a given function with a high degree of accuracy using few constituent terms. Hence, when they are applied to the TMA synthesis, employing single-pole double-throw switches, such a feature leads to an excellent rejection level of the undesired harmonics as well as a bandwidth greater than that supported by conventional TMAs with on-off switches. [ABSTRACT FROM AUTHOR]

Bipolar ($\pm$ 1) sequences with no zero state suit particularly well for safeguarding the switched feeding network efficiency when applied to time-modulated arrays. During the zero state of a conventional time-modulating sequence, if a given array element is switched off, a certain amount of energy of the transmitted/received signal is wasted. We propose a novel single sideband time-modulated phased array (TMPA) architecture governed by realistic bipolar squared sequences in which the rise/fall time of the switches is considered. By using single-pole dual-throw switches and nonreconfigurable passive devices, the TMPA exploits, exclusively, the first positive harmonic pattern while exhibiting an excellent performance in terms of efficiency and control level of the undesired harmonics without using synthesis optimization algorithms (software simplicity). [ABSTRACT FROM AUTHOR]

We present a single sideband time-modulated multibeam phased array governed by periodic Nyquist pulsed signals. A Nyquist pulse is a physically realizable approach to the ideal sinc function. Hence, its low-pass spectrum suits particularly well for time-modulated arrays (TMAs) to perform harmonic beam steering. Contrarily to switched TMAs and standard solutions based on variable phase shifters, the performance and complexity of the proposed time modulation scheme is rather robust when increasing the number of multibeams. [ABSTRACT FROM AUTHOR]

Time-modulated arrays (TMAs) receiving beamforming provide a noteworthy hardware simplicity given the ability of this multi-antenna technique to transform spatial diversity into frequency diversity. However, the dual behavior at transmission seems to be as simple as limited: a given signal is simultaneously transmitted over all the different TMA harmonic patterns. We investigate the efficient and simultaneous transmission of two different signals over the same physical antenna using two independent harmonic beam-patterns of the TMA. For that purpose, we propose an innovative dual-signal TMA transmitter based on two complementary operations: the complex mixing of the baseband signals and the TMA processing with quadrature and time-delayed periodic pulses. [ABSTRACT FROM AUTHOR]

Configuring the hybrid precoders and combiners in a millimeter wave multiuser multiple-input multiple-output system is challenging in frequency selective channels. In this paper, we develop a system that uses compressive estimation on the uplink to configure precoders and combiners for the downlink. In the first step, the base station (BS) simultaneously estimates the channels from all the mobile stations on each subcarrier. To reduce the number of measurements required, compressed sensing techniques are developed that exploit common support on the different subcarriers. In the second step, exploiting reciprocity and the channel estimates the BS designs hybrid precoders and combiners. Two algorithms are developed for this purpose, with different performance and complexity tradeoffs: First, a factorization of the purely digital solution; and second, an iterative hybrid design. Extensive numerical experiments evaluate the proposed solutions comparing to the state-of-the-art strategies, and illustrating design tradeoffs in overhead, complexity, and performance. [ABSTRACT FROM PUBLISHER]

Conventional time-modulated arrays are based on the application of variable-width periodical rectangular pulses (easily implemented with radio frequency switches) to the individual antenna excitations. However, a serious bottleneck arises when the number of exploited harmonic beams increases. In this context, the modest windowing features of the rectangular pulses produce an inflexible and ineffective harmonic beamforming. The use of other pulses, such as sum of weighted cosines, partially solves these issues at the expense of introducing additional non-timing variables. We propose the discrete-time preprocessing of rectangular pulses before being applied to the antenna to accomplish an agile, efficient, and accurate harmonic beamforming, while keeping the simplicity of the hardware structure. [ABSTRACT FROM AUTHOR]

Diversity occurs whenever several copies of the same transmitted signal arrive at a receiver. Such a situation allows for improving the performance of a wireless communication system transmitting over a radio channel without increasing the transmit power. Previous works have shown that time-modulated arrays are capable of faithfully acquiring digital signals while exploiting angular diversity through the adaptive beamforming of their harmonic patterns. In this work, we take a step further and consider a wireless communication system employing digital linear modulated signals and an innovative receiver that includes a time-modulated array and a maximum ratio combining subsystem. The maximum ratio combiner is adapted to optimally exploit the multipath channel angular diversity. The performance of the system is analyzed in terms of two metrics: the signal-to-noise ratio and the symbol error rate. The results are compared to those achieved with other receivers that include conventional antenna arrays, exhibiting the time-modulated array solution a good tradeoff between performance and hardware complexity. [ABSTRACT FROM PUBLISHER]

Time-modulated arrays (TMAs) are electromagnetic systems whose radiated power pattern is controlled by the application of variable-width periodical pulses to the individual elements. The nonlinear nature of the array operation causes the appearance of radiation patterns at the harmonic frequencies of such periodic pulses. The technique can be used for improving the side-lobe level (SLL) topology of the radiation pattern at the central frequency and/or to profitably exploit the harmonic patterns in order to supply smart antenna capabilities. Among the latter features, the TMA harmonic beamforming takes on special importance due to its attractive trade-off performance-hardware complexity. From this perspective, TMAs are sensors capable of transforming the spatial diversity of a communication channel into frequency diversity, thus improving the performance of a wireless communication. In addition to a walk through the origins of the concept, and a brief analysis of the mathematical fundamentals, this paper organizes the prolific state of the art of TMAs in two major thematic blocks: (1) TMA design from an antenna perspective; and (2) TMA design from a signal processing perspective. [ABSTRACT FROM AUTHOR]

Time modulation provides a simple way to control the power radiation pattern of an antenna array. By appropriately selecting the parameters of a Time-Modulated Array (TMA) it is possible to obtain a reconfigurable pencil beam adequate for wireless communications. This work focuses on the impact of a TMA on the Bit Error Ratio (BER) performance of a wireless communication receiver with a linear digital modulation. We show how the BER of such a receiver is affected by the TMA synthesis variables. [ABSTRACT FROM AUTHOR]

Wireless communications are widely based on linear digital modulation methods, which introduce the digital baseband information in the amplitude and/or in the phase of a carrier sinusoid. Time-modulated arrays, on the other hand, constitute an interesting technique capable of adapting the power radiation pattern of an antenna array. In this work, we study from a theoretical point of view the impact of time-modulated arrays on the transmission of linearly modulated digital communication signals. The work focuses on the requirements to safeguard the integrity of the signal and on the quantification of the useful power radiated within the desired band. [ABSTRACT FROM PUBLISHER]

In this paper, we investigate how to increase the capacity of GSM (Global System for Mobile communications) radio interfaces in subway tunnel environments by means of antenna arrays and Space–Time (ST) receivers. We address the modeling, both theoretically and experimentally, of the multiple-antenna wireless channels encountered in subway tunnels. We demonstrate that propagation is conveniently modeled by a flat-fading channel, but there exist strong spatial correlations among channel components that decrease capacity and affect receivers' performance. Different space–time GSM receiving strategies have also been investigated. We first consider ST equalization techniques that only account for the noise and the controlled Intersymbol Interference (ISI) introduced by the modulation format employed in GSM. Then, we analyze the performance of receivers that incorporate ST coding capabilities and show the superior performance of iterative MAP (Maximum a Posteriori) receivers that interchange soft information among the equalizer and the ST decoder. All receivers are evaluated with experimental channels measured in the subway of Paris. Copyright © 2002 John Wiley & Sons, Ltd. [ABSTRACT FROM AUTHOR]

Time-modulated arrays (TMAs) are able to improve the side-lobe level of the radiation pattern at the fundamental mode but cannot steer the beam at such a mode towards a given direction. Beam-steering is possible in a TMA, but only at the harmonic patterns and at the expense of a severe TMA efficiency reduction. In this work we propose a TMA approach that simultaneously performs both features over the same beam by using two sets of switches: (1) single-pole four-throw switches to generate periodic stair-step pulses suitable for efficiently synthesizing a uniform steerable beam over the first positive harmonic, and (2) single-pole single-throw switches to reconfigure the side-lobe level of the previous beam. Performance, small size, cost-effectiveness, and performance invariability with the carrier frequency are features that make this TMA approach a competitive solution for analog beamforming. Accordingly, the structure is an attractive proposal for the design of multibeam transceivers. [ABSTRACT FROM AUTHOR]