Search

In this letter, a design of broadband microstrip three‐way directional coupler (TWDC) is presented. The broadband performance of the microstrip TWDC is realized by the method of cascading multi‐section. The broadband TWDC is designed to achieve equal power division and −120°, 0°, and +120° phase differences between output signals. To verify the broadband design, a prototype of three‐section microstrip TWDC operating at C‐band is designed, fabricated and measured. The measured results show that the power division error of the designed broadband TWDC is less than ±0.7 dB and phase error is less than ±12° at a relative bandwidth of 16%. To verify its performance in multibeam application, the designed TWDC is used as a beamforming network for multibeam antenna array to generate three orthogonal beams. [ABSTRACT FROM AUTHOR]

A design of millimeter wave (mm‐wave) dual‐polarized multibeam antenna array (MAA) with a boresight beam is presented. In order to generate a boresight beam, a 5 × 6 Butler matrix based on three‐way directional couplers is designed as the beamforming network, which achieves equal power division and −60°, +120°, 0°, −120°, +60° progressive phase differences among the output ports when the five input ports are excited, respectively. By four‐layer design, the two 5 × 6 BMs for horizontal polarization (HP) and vertical polarization (VP) are constructed. The patch is used as radiator element, and the HP and VP wave are excited by aperture coupling and microstrip feed, respectively. A prototype is fabricated and measured to verify the design. The measured results show that the designed mm‐wave dual‐polarized MAA can generate five radiation beams including a boresight beam and the five beams with HP and VP cover the range of ±50° at 28 GHz. In addition, the designed mm‐wave dual‐polarized MAA can be a potential option for mm‐wave multibeam application. [ABSTRACT FROM AUTHOR]

A design of planar dual‐polarized differentially fed multibeam patch antenna array (DFMPAA) is presented in this article. The dual‐polarized DFMPAA is composed of two circular 4 × 4 butler matrixs (BMs) and a 1 × 4 dual‐polarized patch antenna array. The two BMs are designed in the top and bottom layer as the feeding network of horizontal polarization (HP) and vertical polarization (VP), respectively. The patch is designed as the radiation element of the dual‐polarized DFMPAA, which is fed by the slot and aperture coupling to generate the HP and VP wave, respectively. To achieve high cross‐polarization discrimination (XPD), the antenna element is fed differentially. A prototype working at 5.5 GHz is fabricated and measured in order to validate the performance of the proposed dual‐polarized DFMPAA. The dimension of the dual‐polarized DFMPAA is 3.8 λ0 × 1.7 λ0. Measured results show that when the beam scan to the maximal pointing angle, the XPD of the dual‐polarized DFMPAA in HP and VP are higher than 27 and 29 dB, respectively. Additionally, the beams of the dual‐polarized DFMPAA can cover the range of ±42° in horizontal plane. [ABSTRACT FROM AUTHOR]

In this letter, a design of multibeam antenna (MBA) with two-dimensional (2-D) beam steerable capability is proposed. The proposed MBA is composed of a circular 4 × 4 butler matrix (BM) and a 2 × 4 patch antenna array. And the 2 × 4 patch antenna array consists of four two-element subarrays uniformly arranged along the E-plane. By introducing the switching diodes in the subarray and controlling the switching diodes on and off, elements of the subarray are excited through the paths with different lengths, and the beam of the subarray is steered subsequently in the H-plane. The circular 4 × 4 BM is designed as the beamforming network to excite the four subarrays uniformly arranged along the E-plane and steer the beam in the E-plane. The proposed MBA can generate 12 beams by selecting the excitation port and controlling the on–off state of the switching diodes. To validate the performance of the proposed MBA, a prototype is fabricated and measured. By design, the dimension of the designed MBA has reduced to 2.9 λ0 × 1.3 λ0. The designed MBA operates at 5.7 GHz, and the results show that the beams of the MBA can cover the range of ±36° in the E-plane and ±22° in the H-plane, respectively. [ABSTRACT FROM AUTHOR]

In this letter, a simple approach to design a reconfigurable feeding network (RFN) for antenna array beam scanning is presented. By combining a 3 dB power divider and a reconfigurable delay line group (RDLG), the two output signals with 2 m+n sets of uniformly distributed phase gradients (PGs) can be obtained. And by adopting multi two-output RFNs and multi-stage design, a RFN for generating 2 m+n continuously distributed beams is constructed. For verifying the design method, a microstrip four-output RFN for generating four scanning beams is implemented, fabricated and measured. The measured results are consistent with the theoretical analysis, which provides the validity of the design. And the design of the RFN can be used as a candidate of the feeding network for antenna array beam scanning. [ABSTRACT FROM AUTHOR]