Search

A low RCS (radar cross section) slot array antenna based on a liquid metal metasurface is proposed. The metasurface consists of 6 × 6 nested ring‐shaped element. The inner ring with a checkerboard distribution can realise 180° ± 37° phase difference, which can effectively reduce the scattering performances for the slot array. The outer and inner ring together can excite more energy from the slot array, thus resulting in increased radiation gains. Therefore, by changing the layout of liquid metal on the metasurface, scattering and radiation enhancement modes can be switched. The measured results show that in the scattering mode, the RCS can be reduced from 8.1 to 17 GHz. While in the radiation enhancement mode, the proposed array with the metasurface can achieve a −10‐dB impedance bandwidth of 9.4–11.2 GHz (17.4%) with a maximum gain of 8.12 dBi. Compared with the slot array without the metasurface, the realised gain is enhanced by 1.2 dBi from 6.9 dBi. The measured results correspond well with the simulated ones. [ABSTRACT FROM AUTHOR]

In this paper, an offset reflector antenna with dual-beam and dual-polarization characteristics is developed to provide the angular diversity function for troposcatter communication system. The antenna system consists of a parabolic reflector and a dual-beam feed. For the dual-beam feed, two identical Ku-band feed elements are arranged side by side to generate two beams toward the reflector. The two beams are substantially nonoverlapping. The feed element is composed of a dielectric rod, a square waveguide, and an ortho-mode transducer. The dielectric rod is effective in reducing the beamwidth of the feed and providing more tapered illumination on the reflector in order to increase the antenna gain. Moreover, the developed antenna is able to produce two independent beams with the vertical and horizontal polarizations. The antenna was fabricated and tested with good agreement between the simulation and measurement results. The measured voltage standing wave ratios of the four feed ports are less than 1.5:1, and the beam separation angle is not more than 0.7° or about one time half-power beamwidth, and the antenna gain is higher than 45 dBi over the operating band from 14.5 to 15.35 GHz. [ABSTRACT FROM AUTHOR]

The design of a novel partially reflective surface (PRS) antenna with the capability of beam steering is presented in this paper. The beam steering is realized by employing a reconfigurable PRS structure to achieve a changeable reflection phase as well as using a phased array as the source to excite the PRS antenna. A prototype antenna including the biasing network is fabricated and measured. It achieves a consistent beam steering from – 15° to 15° with respect to the broadside direction across an overlapped frequency range from 5.5 to 5.7 GHz with measured realized gains over 12 dBi. Good agreement between the simulated and measured results for the input reflection coefficients and radiation patterns is achieved, which validates the feasibility of the design principle. Compared with other beam steering PRS antennas, the proposed one enables a larger beam steering angle with comparable gains, requires a simpler biasing network, and is more compact. [ABSTRACT FROM PUBLISHER]