Search

With the continuous trend to smaller mobile devices with more functionality and more wireless bands, the possible insufficient over-the-air (OTA) performance becomes a growing concern for service providers. In addition to reduced radiation efficiency by smaller antennas in smaller phones, the head and in particular the hand may further impair radiation performance. The aim of this paper is to investigate the influence of the various parameters of the hand upon the OTA performance criteria to support the standardization process of the hand phantom and to provide the tools for optimization of handheld transmitters. The results reveal the following order of significance for small variations in hand parameters: 1) position of index finger; 2) distance between phone case and palm; 3) position of the other fingers; 4) size of the hand; 5) dielectric parameters; 6) wrist length and tilt. Some configurations may lead to a slight increase of the peak spatial SAR in the head. OTA assessment without the hand does not provide a good measure of phone performance in real life. However, good reproducibility of evaluations requires a precise definition of the hand, in particular its geometry and the phone position within the hand. [ABSTRACT FROM AUTHOR]

A commercial clam shell phone CAD model is used to numerically investigate the effect of a hand phantom on mobile phone antenna radiation performance. The simulation results show that the grip of the hand phantom is the most important parameter to antenna performance. The antenna is converted into a parameterized form, then optimized to achieve the targeted multi-band performance in real-usage conditions. [ABSTRACT FROM AUTHOR]

In this paper, we propose a novel method to treat thin conductive (TC) sheets of arbitrary three-dimensional (3-D) shape and curvature with the electromagnetic (EM) finite-difference time-domain (FDTD) algorithm without the need to resolve the sheet thickness spatially. We show that the physical properties of TC sheets enable us to do so without introducing additional field components to the conventional Yee scheme. Due to this noninvasive approach, in addition to the preserved stability of the FDTD algorithm, the method can be directly applied to any existing FDTD kernel, such as parallelized or hardware accelerated versions. The method has been developed within the framework of a professional EM FDTD software package and tested on real-world problems. [ABSTRACT FROM AUTHOR]

In this paper, we describe a specifically designed patch antenna that can be used as the basis antenna element of a clinical phased-array head and neck hyperthermia applicator. Using electromagnetic simulations we optimized the dimensions of a probe-fed patch antenna design for operation at 433 MHz. By several optimization steps we could converge to a theoretical reflection of -38 dB and a bandwidth (-15 dB) of 20 MHz (4.6%). Theoretically, the electrical performance of the antenna was satisfactory over a temperature range of 15 °C-35° C, and stable for patient-antenna distances to as low as 4 cm. In an experimental cylindrical setup using six elements of the final patch design, we measured the impedance characteristics of the antenna 1) to establish its performance in the applicator and 2) to validate the simulations. For this experimental setup we simulated and measured comparable values: -21 dB reflection at 433 MHz and a bandwidth of 18.5 MHz. On the basis of this study, we anticipate good central interference of the fields of multiple antennas and conclude that this patch antenna design is very suitable for the clinical antenna array. In future research we will verify the electrical performance in a prototype applicator. [ABSTRACT FROM AUTHOR]