Search

E-plane sectoral horn antenna based on printed ridge gap waveguide (PRGW) technology is designed for 5G applications. It is implemented on the top plate of the PRGW structure to avoid the losses and dispersion associated with conventional feeding mechanisms. The quasi-transverse electromagneticPRGW-based antenna is excited through a planar microstrip transition. First, the single horn antenna element is introduced with the microstrip feeding section. It shows an impedance bandwidth of fractional bandwidth 26% from 45.7 to 55.4 GHz with the realized gain of 12.7 dBi and radiation efficiency of 90%. In order to maximize the realized gain, a four-element linear horn array is introduced. The same impedance bandwidth is maintained with the array having a gain of 18.6 dBi from 45.7 to 55.4 GHz. The overall antenna array performance in the entire operating frequency range is stable with a radiation efficiency around 85%. Three matching sections are implemented to achieve better impedance matching. One is used to match the horn with the feeding aperture via the PRGW line. Another section is designed to match microstrip transition with PRGW ridge. Finally, two-stage quarter wavelength transformers are required to match the power divider with the array feeding network. A prototype of single-element horn antenna was fabricated to verify the concept of the design. Simulated and measured results show that the proposed antenna can operate in the frequency band of 45–55 GHz with good agreement of radiation performance. Moreover, the proposed designs are implemented and simulated using two microwave simulation tools (CST and HFSS) to verify the radiation performance, which exhibits good agreement. The design of an E-sectoral horn antenna and its array with high gain based on PRGW is demonstrated for the first time which is considered a novel issue. It can be integrated with other passive and active elements in communication systems. Thus, it can be a valuable component in 5G communication due to its high gain, compact size and ultra-wide band. [ABSTRACT FROM AUTHOR]

This paper presents a printed multiple-input multiple-output (MIMO) antenna with the advantages of compact size, good MIMO diversity performance and simple geometry for fifth-generation (5G) millimeter-wave (mm-Wave) applications. The antenna offers a novel Ultra-Wide Band (UWB) operation from 25 to 50 GHz, using a Defective Ground Structure (DGS) technology. Firstly, its compact size makes it suitable for integrating different telecommunication devices for various applications, with a prototype fabricated having a total size of 33 mm × 33 mm × 0.233 mm. Second, the mutual coupling between the individual elements severely impacts the diversity properties of the MIMO antenna system. An effective technique of orthogonally positioning the antenna elements to each other increased their isolation; thus, the MIMO system provides the best diversity performance. The performance of the proposed MIMO antenna was investigated in terms of S-parameters and MIMO diversity parameters to ensure its suitability for future 5G mm-Wave applications. Finally, the proposed work was verified by measurements and exhibited a good match between simulated and measured results. It achieves UWB, high isolation, low mutual coupling, and good MIMO diversity performance, making it a good candidate and seamlessly housed in 5G mm-Wave applications. [ABSTRACT FROM AUTHOR]