Search

The process of coagulation and precipitation affect the fate and mobility of antimony (Sb) species in drinking water. Moreover, the solubility and physico-chemical properties of the precipitates may be affected by the media chemistry. Accordingly, the present study aimed to investigate the removal of Sb(III, V) species by ferric chloride coagulation under various water chemistry influences with a particular focus on the role of the properties of the precipitates. The results indicated that the amount of Sb(III) removed increased with increasing solution pH, showing the insignificant effects of the hydrodynamic diameter (HDD) and ζ-potential of the precipitates. However, no Sb(V) removal occurred at alkaline pH values, while a highly negative ζ-potential and the complete dissolution of precipitates were observed in the aqueous solution. The solution pH was also useful in determining the dominant coagulation mechanisms, such as co-precipitation and adsorption. The Fe solubility substantially affects the Sb removal at a certain pH range, while the HDD of the precipitates plays an insignificant role in Sb removal. The presence of divalent cations brings the ζ-potential of the precipitates close to point of zero charge (pzc), thus enhancing the Sb(V) removal at alkaline pH conditions. Pronounced adverse effects of humic acid were observed on Sb removal, ζ-potential and HDD of the precipitates. In general, this study may provide critical information to a wide group of researchers dealing with environmental protection from heavy metal pollution.

The presence of natural organic matter (NOM) in drinking water sources can stabilize toxic antimony (Sb) species, thus enhancing their mobility and causing adverse effects on human health. Therefore, the present study aims to quantitatively explore the complexation of hydrophobic/hydrophilic NOM, i.e., humic acid (HA), salicylic acid (SA), and L-cysteine (L-cys), with Sb in water. In addition, the removal of Sb(III, V) species and total organic carbon (TOC) was evaluated with ferric chloride (FC) as a coagulant. The results showed a stronger binding affinity of hydrophobic HA as compared to hydrophilic NOM. The optimum FC dose required for Sb(V) removal was found to be higher than that for Sb(III), due to the higher complexation ability of hydrophobic NOM with antimonate than antimonite. TOC removal was found to be higher in hydrophobic ligands than hydrophilic ligands. The high concentration of hydrophobic molecules significantly suppresses the Sb adsorption onto Fe precipitates. An isotherm study suggested a stronger adsorption capacity for the hydrophobic ligand than the hydrophilic ligand. The binding of Sb to NOM in the presence of active Fe sites was significantly reduced, likely due to the adsorption of contaminants onto precipitated Fe. The results of flocs characteristics revealed that mechanisms such as oxidation, complexation, charge neutralization, and adsorption may be involved in the removal of Sb species from water. This study may provide new insights into the complexation behavior of Sb in NOM-laden water as well as the optimization of the coagulant dose during the water treatment process.

The co-contamination of aquatic systems with antimony (Sb) and humic acid (HA) is a global concern due to their potential risks to human health and environment. In this research, three-level-three-variable Box–Behnken design (BBD) was investigated for simultaneous Sb(III) and total organic carbon (TOC) removal responses from groundwater by use of ferric chloride (FC) as a coagulant. This study focuses on three operating variables, including initial Sb(III) concentration (100, 550, and 1000 μg/L), HA concentration (2, 6, and 10 mgC/L) and FC dosages (20, 60, and 100 mg/L). The proposed quadratic model presented good correlation with experimental values having R2 and adjusted R2 values of response variables (Sb(III): 0.9981 and 0.9956) and (TOC: 0.9935 and 0.9851), respectively. The most pronounced influence of FC dosage was observed in the removal responses of TOC and Sb(III). Interestingly, the model revealed that a high level of FC dosage had the same TOC removal potential regardless of increasing HA concentration. The statistical model for both Sb(III) and TOC responses was used to optimize the experimental conditions. Moreover, the experimental results were successfully validated with predicted values having high accuracy. The sludge volume produced for studied variables followed the decreasing order as FC dosage > HA concentration > Sb(III) concentration. Under optimum conditions, 0.45 mL/L sludge volume was produced in the treatment of ground water in Nawabshah. In general, the results of the current study may provide some insights into the predictability of simultaneous removal performance of Sb species and organic substances from groundwater. [ABSTRACT FROM AUTHOR]

The presence of inorganic and organic substances may alter the physicochemical properties of iron (Fe) salt precipitates, thereby stabilizing the antimony (Sb) oxyanions in potable water during the chemical treatment process. Therefore, the present study aimed to examine the surface characteristics, size of Fe flocs and coagulation performance of Sb oxyanions under different aqueous matrices. The results showed that surface properties of Fe flocs significantly varies with pH in both Sb(III, V) suspensions, thereby increasing the mobility of Sb(V) ions in alkaline conditions. The negligible change in surface characteristics of Fe flocs was observed in pure water and Sb(III, V) suspension at pH 7. The key role of Van der Waals forces of attraction as well as hydration force in the aggregation of early formed flocs were found, with greater agglomeration capability at higher more ferric chloride dosage. The higher Sb(V) loading decreased the size of Fe flocs and reversed the surface charge of precipitates, resulting in a significant reduction in Sb(V) removal efficiency. The competitive inhibition effect on Sb(III, V) removal was noticed in the presence of phosphate anions, owing to lowering of ζ-potential values towards more negative trajectory. The presence of hydrophobic organic matter (humic acid) significantly altered the surface characteristics of Fe flocs, thereby affecting the coagulation behavior of Sb in water as compared to the hydrophilic (salicylic acid). Overall, the findings of this research may provide a new insight into the variation in physicochemical characteristics of Fe flocs and Sb removal behavior in the presence of inorganic and organic compounds during the drinking water treatment process. [ABSTRACT FROM AUTHOR]

Coprecipitation-adsorption plays a significant role during coagulation-flocculation-sedimentation (C/F/S) of antimony (Sb) in water. This work uses a Box–Behnken statistical experiment design (BBD) and response surface methodology (RSM) to investigate the effects of major operating variables such as initial Sb(III, V) concentration (100–1000 µg/L), ferric chloride (FC) dose (5–50 mg/L), and pH (4–10) on redox Sb species. Experimental data of Sb(III, V) removal were used to determine response function coefficients. The model response value (Sb removal) showed good agreement with the experimental results. FC showed promising coagulation behavior of both Sb species under optimum pH (6.5–7.5) due to its high affinity towards Sb species and low residual Fe concentration. However, a high dose of 50 mg/L of FC is required for the maximum (88–93%) removal of Sb(V), but also for the highest (92–98%) removal of low initial concentrations of Sb(III). Furthermore, BBD and RSM were found to be reliable and feasible for determining the optimum conditions for Sb removal from environmental water samples by a C/F/S process. This work may contribute to a better understanding and prediction of the C/F/S behavior of Sb(III, V) species in aqueous environments, to reduce potential risks to humans. [ABSTRACT FROM AUTHOR]

In most countries, arsenic (As) and antimony (Sb) are regulated pollutants, due to their significant impacts on the environment and human health. Iron-based (Fe) coagulants play a fundamental role in the removal of both elements from aqueous media. This study aims to investigate the competitive removal of As and Sb in relation to Fe solubility. Coagulation experiments were conducted in synthetic water under various pH and contaminant loading, using ferric chloride (FC) as a coagulant. In the single system, the pentavalent species significantly reduced the Fe solubility and thereby enhanced the mobility of As and Sb under these environmental conditions. The coexistence of pentavalent and trivalent species in the binary system considerably decreases the Fe solubility at acidic conditions while enhancing the dissolution under alkaline conditions, thus affecting the overall removal of both species. The presence of four redox species in the quaternary system decreases the Fe solubility remarkably over a wide pH range, with better Sb removal, as compared to As under similar conditions. The adsorption study of the single system showed a decrease in As(V) adsorption capacity at higher concentration, while in the binary system, the Sb(III) showed strong adsorption potential, compared to other species. In the quaternary system, the presence of all four redox species has a synergistic effect on total Sb adsorption, in comparison to the total As. Furthermore, the results of Fourier transform infrared (FT-IR) analysis of FC composite contaminant flocs confirm that the combined effect of charge neutralization and inner sphere complexation might be a possible removal mechanism. These findings may facilitate the fate, transport and comparative removal of redox species in the heterogeneous aquatic environment. [ABSTRACT FROM AUTHOR]

Coagulation and precipitation appear to be the most efficient and economical methods for the removal of antimony from aqueous solution. In this study, antimony removal from synthetic water and Fe solubility with ferric chloride (FC) coagulation has been investigated. The effects of pH, FC dosage, initial antimony loading and mixed Sb(III), Sb(V) proportions on Fe solubility and antimony removal were studied. The results showed that the Sb(III) removal efficiency increased with the increase of solution pH particularly due to an increase in Fe precipitation. The Sb(V) removal was influenced by the solution pH due to a change in Fe solubility. However, the Fe solubility was only impaired by the Sb(III) species at optimum pH 7. The removal efficiencies of both Sb species were enhanced with an increase in FC dose. The quantitative analysis of the isotherm study revealed the strong adsorption potential of Sb(III) on Fe precipitates as compared to Sb(V). Furthermore, the removal behavior of antimony was inhibited in mixed proportion with high Sb(V) fraction. In conclusion, this study contributes to better understanding the fate of Sb species, their mobilities, and comparative removal behavior, with implications for Fe solubility using ferric chloride in different aqueous environments. [ABSTRACT FROM AUTHOR]