Search

Aptamers have superior structural properties and have been widely used in bacterial detection methods. However, the problem of low affinity still exists in complex sample detection. In contrast, hybridization chain reaction (HCR)-based model I and rolling circle amplification (RCA)-based model II multivalent activatable aptamers (multi-Apts) can fulfill the need for low-cost, rapid, highly sensitive and high affinity detection of S. typhimurium. In our research, two models of multi-Apts were designed. First, a monovalent activatable aptamer (mono-Apt) was constructed by fluorescence resonance energy transfer (FRET) with an S. typhimurium aptamer and its complementary chain of BHQ1. Next, the DNA scaffold was obtained by HCR and RCA, and the multi-Apts were obtained by self-assembly of the mono-Apt with a DNA scaffold. In model I, when target was presented, the complementary chain BHQ1 was released due to the binding of multi-Apts to the target and was subsequently adsorbed by UIO66. Finally, a FRET-based fluorescence detection signal was obtained. In mode II, the multi-Apts bound to the target, and the complementary chain BHQ1 was released to become the trigger chain for the next round of amplification of HCR with a fluorescence detection signal. HCR and RCA based multi-Apts were able to detect S. typhimurium as low as 2 CFU mL -1 and 1 CFU mL -1 respectively. Multi-Apts amplification strategy provides a new method for early diagnosis of pathogenic microorganisms in foods., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Successful construction of a detection method for Salmonella typhimurium (S. typhimurium) based on the synergy of hybridization chain reaction (HCR) and fluorescence was realized in this paper. First, the aptamer modified with the quenching group Black Hole Quencher-1 acid (BHQ1) was immobilized on the magnetic beads in combination with the complementary chain of the aptamer modified with 6-carboxyfluorescein (6-FAM). Second, S. typhimurium and cDNA-6-FAM immobilized on magnetic beads competitively bound to the aptamer. Finally, the cDNA-6-FAM was released after magnetic separation acted as a promoter to trigger HCR amplification when the target presented. The fluorescence signal could be significantly improved by the combination of green SYBR Green I (SGI) and HCR long double-stranded DNA and the fluorescent synergy of 6-FAM and SGI. Because of the separation of target and its aptamer, the trigger strand was abstracted by magnetic separation. There was no HCR to generate long double-stranded DNA, and the fluorescence of excess hairpin/SGI could be adsorbed through UIO66 so that only a very low background signal was detected. This fluorescent sensor was capable of monitoring S. typhimurium in the range of 10-3.2 × 10 7  CFU mL -1 with a limit of detection as low as 1.5 CFU mL -1 . Because of the excellent properties of the aptasensor and the validity of SGI fluorescence synergy, this HCR enzyme-free amplification strategy could be generalized to other areas., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

To effectively monitor multi-residues of penicillin antibiotics (PENs) in milk, we developed a novel ratiometric electrochemical aptasensor enabling simultaneous detection of PENs. The aptasensor employed a broad-spectrum aptamer as a recognition element, niobium carbide functionalized with methylene blue (Nb 2 C-MB) as a reference signal generator, and a ferrocene-labeled aptamer (Fc-Apt) as an output signal. Electrodes were modified with Fe-N-C doped carbon nanotubes (Fe-N-C-CNTs) to amplify detection signals further. During detection, Fc-Apt binding to PENs decreased Fc current intensity (I Fc ) and increased MB current intensity (I MB ). The simultaneous detection of PENs was achieved using I MB /I Fc as a quantitative signal. Under optimal conditions, a good linear relationship between I MB /I Fc and antibiotic concentration was observed, indicating the aptasensor had a robustness. The limits of detection of aptasensor for four penicillin antibiotics and their mixed targets were 0.093-0.191 nM. This work provides a new approach to multi-residue detection of the same class of antibiotics., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Gold nanoparticles (AuNPs)@N-(4-aminobutyl)-N-ethylisoluminol (ABEI)@Titanium dioxide nanorods (TiO 2 NRs) were used as sensing materials to produce a unique encapsulated nanostructure aptasensor for the detection of acetamiprid residues in this work. ABEI, an analog of luminol, was extensively used as an electrochemiluminescence (ECL) reagent. The ECL mechanism of ABEI- hydrogen peroxide (H 2 O 2 ) system had connections to a number of oxygen-centered free radicals. TiO 2 NRs improved ECL response with high electron transfer and a specific surface area. AuNPs were easy to biolabel and could catalyze H 2 O 2 to enhance ECL signal. AuNPs were wrapped around TiO 2 NRs by utilizing the reduction property of ABEI to form wrapped modified nanomaterials. The sulfhydryl-modified aptamer bound to the nanomaterial by forming gold-sulfur (Au-S) bonds. The aptamer selectively bound to its target with the addition of acetamiprid, which caused a considerable decrease in ECL intensity and enabled quantitative detection of acetamiprid. The aptasensor showed good stability, repeatability and specificity with a broad detection range (1×10 -2 -1×10 3  nM) and a lower limit of detection (3 pM) for acetamiprid residues in vegetables. Overall, this aptasensor presents a simple and highly sensitive method for ECL detecting acetamiprid, with potential applications in vegetable safety monitoring., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

Penicillin antibiotics (PENs) play an important role in killing pathogenic bacteria. However, the residues of various penicillin antibiotics in milk gradually accumulate in the human body with the increase of milk intake, which causes direct harm to the human body. Aptamers can be used as recognition element of sensors. It is great significance to use broad-spectrum aptamers for simultaneous detection of PENs. In this study, we reported the screening and identification of DNA aptamers for PENs. The aptamers were screened by graphene oxide-systematic evolution of ligands by exponential enrichment (GO-SELEX). The broad-spectrum aptamers with high affinity and specificity were successfully obtained after 13 rounds of screening. The affinity and specificity of candidate aptamers were analyzed by a GO fluorescence competition method. Further sequence analysis revealed that a truncated 47 nt aptamer (P-11-1) had a higher affinity than the original 79 nt aptamer. The truncated aptamer P-11-1 was used as a recognition element, and an electrochemical aptasensor was prepared using gold nanoparticles (AuNPs) combined with ferroferric oxide-multi walled carbon nanotube (Fe 3 O 4 -MWCNTs) complex. The results showed that the developed aptasensor achieved the simultaneous detection of PENs in milk samples across a concentration range of 2 nM-10,000 nM, achieving a limit of detection of 0.667 nM. This methodology provided a simple and sensitive new thinking for antibiotic multi-residue detection., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

Acetamiprid (ACE) is a highly effective broad-spectrum insecticide, and its widespread use is potentially harmful to human health and environmental safety. In this study, magnetic Fe 3 O 4 /carbon (Fe 3 O 4 /C), a derivative of metal-organic framework MIL-101 (Fe), was synthesized by a two-step calcination method. And a fluorescent sensing strategy was developed for the efficient and sensitive detection of ACE using Fe 3 O 4 /C and multiple complementary single-stranded DNA (ssDNA). By using aptamer with multiple complementary ssDNA, the immunity of interference of the aptasensor was improved, and the aptasensor showed high selectivity and sensitivity. When ACE was present, the aptamer (Apt) combined with ACE. The complementary strand of Apt (Cs1) combined with two short complementary strands of Cs1, fluorophore 6-carboxyfluorescein-labeled complementary strand (Cs2-FAM) and the other strand Cs3. The three strands formed a double-stranded structure, and fluorescence would not be quenched by Fe 3 O 4 /C. In the absence of ACE, Cs2-FAM would be in a single-chain state and would be adsorbed by Fe 3 O 4 /C, and the fluorescence of FAM would be quenched by Fe 3 O 4 /C via photoelectron transfer. This aptasensor sensitively detected ACE over a linear concentration range of 10-1000 nM with a limit of detection of 3.41 nM. The recoveries of ACE spiked in cabbage and celery samples ranged from 89.49% to 110.76% with high accuracy., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH, DE part of Springer Nature.)

In this work, aptamers against E. coli with better performance were obtained via cell systematic evolution of ligands by exponential enrichment (cell-SELEX) and dissociation constants (Kd) of aptamers were estimated to range from 133.87 to 199.44 nM. Furthermore, the selected aptamer was employed for label-free colorimetric detection of E. coli using gold nanoparticles (AuNPs) with peroxidase-like activity to catalyze the oxidation of tetramethylbenzidine (TMB) by hydrogen peroxide (H 2 O 2 ) to produce color development. This colorimetric apta-assay started with an aptamer-bacteria binding step, and the concentration of residual aptamers after binding depended on the amount of target bacteria. Then, the amount of separated residual aptamers determined the degree of cetyltrimethylammonium bromide (CTAB)-inhibited catalytic activity of AuNPs, which resulted in a color change from dark blue to light blue. Owing to the excellent peroxidase activity of AuNPs, they could emit strong visible color intensity in less than 1 minute to improve visual detection sensitivity. Under optimized conditions, the sensitivity of detection was 5 × 10 3 CFU mL -1 visually and 75 CFU mL -1 using the UV-vis spectrum with a linear range from 5 × 10 2 to 1 × 10 6 CFU mL -1 . And it had shown a good recovery rate in real samples of water, juice and milk compared with classical counting methods.

In this work, an aptamer against Escherichia coli is isolated via non-SELEX, which executes efficient selection by employing repetitive cycles of centrifugation-based partitioning, and the binding site of the aptamer on E. coli cell surfaces is inferred to be a membrane protein. Moreover, truncated sequence 2-17-2 with a higher affinity ( K d = 101.76 nM) is employed for highly sensitive colorimetric detection of bacteria based on the dual signal amplification strategy. When targets exist, the release of DNA 1 from the polymer activates a hybridization chain reaction (HCR) between DNA 1 and DNA 2, thereby inducing the aggregation of probe 1. Subsequently, DNA 3 dissociated from probe 1 as a linker DNA further assembles probe 2/3. In this system, two types of DNA@gold nanoparticles (AuNPs) coexist and successively aggregate AuNPs based on divergent triggering mechanisms. Under optimal conditions, the dual signal amplification strategy presents excellent sensitivity (10 CFU mL -1 ) and specificity, as well as the realization of real sample analysis.

Herein, a novel electrochemical aptasensor using a broad-spectrum aptamer as a biorecognition element was constructed based on a screen-printed carbon electrode (SPCE) for simultaneous detection of aminoglycoside antibiotics (AAs). The ordered mesoporous carbon (OMC) was firstly modified on 2D Ti 3 C 2 MXene. The addition of OMC not only effectively improved the stability of the aptasensor, but also prevented the stacking of Ti 3 C 2 sheets, which formed a good current passage for signal amplification. The prepared OMC@Ti 3 C 2 MXene functioned as a nanocarrier to accommodate considerable aptamers. In the presence of AAs, the transport of electron charge on SPCE surface was influenced by the bio-chemical reactions of the aptamer and AAs, generating a significant decline in the differential pulse voltammetry (DPV) signals. The proposed aptasensor presented a wide linear range and the detection limit was 3.51 nM. Moreover, the aptasensor, with satisfactory stability, reproducibility and specificity, was successfully employed to detect the multi-residuals of AAs in milk. This work provided a novel strategy for monitoring AAs in milk.

Pathogenic bacteria are primarily kinds of detrimental agents that cause mankind illness via contaminated food with traits of multiple types, universality, and low content. In view of the detection demands for rapidity, aptamer recognition factors emerged as a substitution for antibodies, which are short single strands of nucleic acid selected via in vitro . They display certain superiorities over antibodies, such as preferable stability, liable modification, and cost-efficiency. Taking advantage of the situation, numerous aptamers against pathogenic bacteria have been successfully selected and applied, yet there are still restrictions on commercial availability. In this review, the strategies/approaches to key sections in pathogen aptamers SELEX and post-SELEX are summarized and sorted out. Recently, optical, electrochemical, and piezoelectric aptamer-based assays or sensors dedicated to pathogen detection have been critically reviewed. Ultimately, the existing challenges and future trends in this field are proposed to further promote development prospects.

Due to the massive use of thiamethoxam (TMX) pesticide and the accumulated potential hazards exposure, the detection of TMX is of great significance to food and ecological safety. In this study, aptamers with affinity for TMX were obtained through graphene oxide assisted systematic evolution of ligands by exponential enrichment (GO-SELEX). After 9 rounds of positive and counter selection, 5 candidate sequences were obtained, among which seq.20 had the highest affinity for TMX, and its dissociation constant (K d ) was 210.47 ± 79.37 nM. Then, the aptamer was further truncated based on structural analysis. The truncated aptamers (seq.20-1, seq.20-2) exhibited higher affinity (K d  = 118.34 ± 13.85 nM, K d  = 123.35 ± 29.80 nM), which seq.20-2 had only 37 bases. Furthermore, circular dichroism spectroscopy showed that TMX induced the conformation of aptamer from B-form structure to hairpin structure, and then formed a stable TMX-ssDNA complex. Finally, the truncated aptamer (seq.20-2) and the original aptamer (seq.20) were used as recognition elements to construct colorimetric aptasensors based on gold nanoparticles for the detection of TMX. It was found that the sensitivity of the former (LOD = 1.67 ± 0.12 nM, S/N = 3) was better than that of the latter (LOD = 3.33 ± 0.23 nM, S/N = 3). Feasibility of truncated aptamer as recognition element in the detection of TMX in vegetable samples was preliminarily verified., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022. Published by Elsevier B.V.)

Herein, a new electrochemical aptamer-based biosensor for highly sensitive assay of thrombin has been developed based on the dual-signaling electrochemical ratiometric method and the DNA walker strategy, and shows a low detection limit of about 56 fM.