Search

Early detection of power transformer fault is important because it can reduce the maintenance cost of the transformer and it can ensure continuous electricity supply in power systems. Dissolved Gas Analysis (DGA) technique is commonly used to identify oil-filled power transformer fault type but utilisation of artificial intelligence method with optimisation methods has shown convincing results. In this work, a hybrid support vector machine (SVM) with modified evolutionary particle swarm optimisation (EPSO) algorithm was proposed to determine the transformer fault type. The superiority of the modified PSO technique with SVM was evaluated by comparing the results with the actual fault diagnosis, unoptimised SVM and previous reported works. Data reduction was also applied using stepwise regression prior to the training process of SVM to reduce the training time. It was found that the proposed hybrid SVM-Modified EPSO (MEPSO)-Time Varying Acceleration Coefficient (TVAC) technique results in the highest correct identification percentage of faults in a power transformer compared to other PSO algorithms. Thus, the proposed technique can be one of the potential solutions to identify the transformer fault type based on DGA data on site. [ABSTRACT FROM AUTHOR]

Cable joint insulation breakdown may cause a huge loss to power companies. Therefore, it is vital to diagnose the insulation quality to detect early signs of insulation failure. It is well known that there is a correlation between Partial discharge (PD) and the insulation quality. Although many works have been done on PD pattern recognition, it is usually performed in a noise free environment. Also, works on PD pattern recognition in actual cable joint are less likely to be found in literature. Therefore, in this work, classifications of actual cable joint defect types from partial discharge data contaminated by noise were performed. Five cross-linked polyethylene (XLPE) cable joints with artificially created defects were prepared based on the defects commonly encountered on site. Three different types of input feature were extracted from the PD pattern under artificially created noisy environment. These include statistical features, fractal features and principal component analysis (PCA) features. These input features were used to train the classifiers to classify each PD defect types. Classifications were performed using three different artificial intelligence classifiers, which include Artificial Neural Networks (ANN), Adaptive Neuro-Fuzzy Inference System (ANFIS) and Support Vector Machine (SVM). It was found that the classification accuracy decreases with higher noise level but PCA features used in SVM and ANN showed the strongest tolerance against noise contamination. [ABSTRACT FROM AUTHOR]

In power transformer fault diagnosis, dissolved gas analysis (DGA) has been widely used to identify the type of the fault. The common methods of DGA are IEC 60599 method, Doenenberg’s ratio method and Roger’s ratio method. The accuracy of the DGA diagnosis will determine the cost, duration and workload of the maintenance since it can influence the error in the maintenance. Although DGA methods have been used widely, sometimes they still yield incorrect diagnosis results. Thus, many works on transformer fault diagnosis have been proposed previously, which include artificial intelligence methods, to improve the accuracy of transformer fault diagnosis. However, the accuracy of the previously reported works is believed to have rooms for improvement. Therefore, in this work, hybrid modified evolutionary particle swarm optimisation-time varying acceleration coefficient (MEPSO-TVAC)-artificial neural network (ANN) was proposed for transformer fault diagnosis based on dissolved gas data. This is due to these two methods have never been proposed for transformer fault diagnosis in the past. The performance of the ANN was optimised through the proposed MEPSO-TVAC. The superiority of the proposed method was demonstrated through comparison with the existing DGA methods, unoptimised ANN and previously reported methods in literatures. The comparison shows that the proposed hybrid MEPSO-TVAC-ANN obtained the highest accuracy among all methods, which can then be used for power transformer fault diagnosis. [ABSTRACT FROM AUTHOR]

In order to investigate how artificial neural networks (ANNs) have been applied for partial discharge (PD) pattern recognition, this paper reviews recent progress made on ANN development for PD classification by a literature survey. Contributions from several authors have been presented and discussed. High recognition rate has been recorded for several PD faults, but there are still many factors that hinder correct recognition of PD by the ANN, such as high-amplitude noise or wide spectral content typical from industrial environments, trial and error approaches in determining an optimum ANN, multiple PD sources acting simultaneously, lack of comprehensive and up to date databank of PD faults, and the appropriate selection of the characteristics that allow a correct recognition of the type of source which are currently being addressed by researchers. Several suggestions for improvement are proposed by the authors include: (1) determining the optimum weights in training the ANN; (2) using PD data captured over long stressing period in training the ANN; (3) ANN recognizing different PD degradation levels; (4) using the same resolution sizes of the PD patterns when training and testing the ANN with different PD dataset; (5) understanding the characteristics of multiple concurrent PD faults and effectively recognizing them; and (6) developing techniques in order to shorten the training time for the ANN as applied for PD recognition Finally, this paper critically assesses the suitability of ANNs for both online and offline PD detections outlining the advantages to the practitioners in the field. It is possible for the ANNs to determine the stage of degradation of the PD, thereby giving an indication of the seriousness of the fault. [ABSTRACT FROM AUTHOR]

It is important to predict the incipient fault in transformer oil accurately so that the maintenance of transformer oil can be performed correctly, reducing the cost of maintenance and minimise the error. Dissolved gas analysis (DGA) has been widely used to predict the incipient fault in power transformers. However, sometimes the existing DGA methods yield inaccurate prediction of the incipient fault in transformer oil because each method is only suitable for certain conditions. Many previous works have reported on the use of intelligence methods to predict the transformer faults. However, it is believed that the accuracy of the previously proposed methods can still be improved. Since artificial neural network (ANN) and particle swarm optimisation (PSO) techniques have never been used in the previously reported work, this work proposes a combination of ANN and various PSO techniques to predict the transformer incipient fault. The advantages of PSO are simplicity and easy implementation. The effectiveness of various PSO techniques in combination with ANN is validated by comparison with the results from the actual fault diagnosis, an existing diagnosis method and ANN alone. Comparison of the results from the proposed methods with the previously reported work was also performed to show the improvement of the proposed methods. It was found that the proposed ANN-Evolutionary PSO method yields the highest percentage of correct identification for transformer fault type than the existing diagnosis method and previously reported works. [ABSTRACT FROM AUTHOR]

The development of artificial intelligence (AI) based techniques for electricity price forecasting (EPF) provides essential information to electricity market participants and managers because of its greater handling capability of complex input and output relationships. Therefore, this research investigates and analyzes the performance of different optimization methods in the training phase of artificial neural network (ANN) and adaptive neuro-fuzzy inference system (ANFIS) for the accuracy enhancement of EPF. In this work, a multi-objective optimization-based feature selection technique with the capability of eliminating non-linear and interacting features is implemented to create an efficient day-ahead price forecasting. In the beginning, the multi-objective binary backtracking search algorithm (MOBBSA)-based feature selection technique is used to examine various combinations of input variables to choose the suitable feature subsets, which minimizes, simultaneously, both the number of features and the estimation error. In the later phase, the selected features are transferred into the machine learning-based techniques to map the input variables to the output in order to forecast the electricity price. Furthermore, to increase the forecasting accuracy, a backtracking search algorithm (BSA) is applied as an efficient evolutionary search algorithm in the learning procedure of the ANFIS approach. The performance of the forecasting methods for the Queensland power market in the year 2018, which is well-known as the most competitive market in the world, is investigated and compared to show the superiority of the proposed methods over other selected methods. [ABSTRACT FROM AUTHOR]